setting web proxy mikrotik
Most Relevant Content
MikroTik Router Web Proxy Configuration
A Proxy Server is usually placed between users and the internet so that the proxy server can track the activities of any user. Formerly, a proxy server was mainly used for caching the static content of any web server because the internet speed was too slow. So, users would get high speed for browsing as if they were browsing a local server. But nowadays the internet bandwidth has increased. So, the proxy server is usually not used for web caching today rather than it is popularly used as ACL (Access Control List) server. MikroTik RouterOS can perform as a HTTP proxy server. As a proxy server MikroTik Router has the following features. Regular HTTP Proxy Server: MikroTik Router can perform as a regular HTTP proxy server where a user can specify the proxy for him with his/her browser. Transparent proxy server: MikroTik RouterOS can also perform as a transparent proxy server where users do not know about the proxy being enabled and there is no extra configuration to the user’s browser. Access Control List: It can do access list by source, destination, URL and requested method (HTTP firewall). Cache access list: MikroTik can specify which object have to cache and [...]
- »
MikroTik WebProxy Log Analyzer Configuration | August 30, 2016
MikroTik RouterOS generally logs various system events and status information. Logs are mainly saved in router’s memory (RAM) or disk. MikroTik logs can also be sent by email or even can be sent to a remote syslog server. All logs those are saved in router’s local memory can be viewed from Log menu. Any log entry that is saved in local memory contains time and date when event occurred, topics that this message belongs to and message itself. But local [...]
- »
How to Block Tor Browser with MikroTik Router | June 12, 2019
Tor Browser is an alternative to VPN and Web Proxy that breaks blocking firewall rule. If any user installs and uses Tor Browser, he/she can hide the public IP address of router and can unblock blocked websites applied on a network. So, administrators should block Tor Nodes along with other blocking firewall rule. In my previous article, I discussed how to block VPN and Proxy access with MikroTik Router and in this article I will discuss how to block Tor [...]
- »
MikroTik DHCP Server Configuration with Radius Server | January 24, 2018
The Dynamic Host Configuration Protocol (DHCP) is a client-server protocol that is used to assign an IP address and other network configuration parameters dynamically to each device on a network so that they can communicate with other IP networks. DHCP Server is popularly used in an Enterprise Office Network because in an office network various types of IP devices such as Laptop, Desktop, Tablet, Smartphone, IP Phone and so on are maintained and almost all IP devices support DHCP. An ISP Network can also be [...]
- »
MikroTik IPIP Tunnel with IPsec (Site to Site VPN) | March 18, 2018
VPN (Virtual Private Network) is a technology that provides a secure tunnel across a public network. A private network user can send and receive data to any remote private network using VPN Tunnel as if his/her network device was directly connected to that private network. MikroTik provides IPIP tunnel that is used to create a site to site VPN. IPIP tunnel is a simple protocol that encapsulates IP packets in IP to make a tunnel between two routers. To encapsulate [...]
- »
LVM Management in CentOS/Red Hat 7 Linux | March 15, 2019
LVM (Logical Volume Manager) is the recommended partition method for CentOS/Red Hat 7 Linux. Specially, if we work on Mail Server, File Server, FTP Server, Web Proxy Server or any application where disk space changes frequently, the LVM partition is mandatory in this case. In my previous article, I discussed how to install CentOS 7.5 with LVM partitioning. If you are new here or CentOS 7 is not yet installed, I will suggest you to follow my previous article and [...]
- »
Single IP NAT Strategy in MikroTik Router | September 29, 2015
MikroTik Router has a lot of features which help to customize your network as your requirement. Sometimes, it may be your requirement that you need to allow per IP internet access. Normally, when you apply masquerade NAT rule in your MikroTik router, you accept all private IP will be masqueraded or a network block will be masqueraded. But if you do so and enable a DHCP server in your network, you may face a lot of unauthorized accesses in your [...]
- »
MikroTik SSTP VPN Server Configuration with Windows 10 | April 27, 2020
VPN (Virtual Private Network) technology provides a secure and encrypted tunnel across a public network. So, a private network user can send and receive data to any remote private network through VPN tunnel as if his/her network device was directly connected to that private network. Secure Socket Tunneling Protocol (SSTP) transports PPP tunnel over TLS channel. SSTP uses TLS channel over TCP port 443. So, SSTP VPN can virtually pass through all firewalls and proxy servers. Because of using TLS [...]
- »
MikroTik Hotspot with Bandwidth Limitation and Prepaid Billing System | January 14, 2018
Say, you are a network administrator and want to establish a network that will have user bandwidth package management facility with prepaid billing system as well as partner advertisement facility. Then, MikroTik Hotspot Server Configuration with MikroTik User Manager Radius Server will be a wise decision. Because, MikroTik User Manager Radius Server is a user authentication, authorization and accounting application that will give facility to manage user bandwidth package with prepaid billing system. On the other hand, you can easily [...]
- »
MikroTik Hardware Redundancy with VRRP | October 8, 2018
MikroTik VRRP (Virtual Router Redundancy Protocol) ensures high availability internet network. If any organization requires uninterrupted internet connection, MikroTik VRRP implementation will be a vital solution for them. MikroTik VRRP creates a virtual router accumulating two or more physical routers and ensures uninterrupted internet connection keeping activate one physical router always. That means, if any physical router fails to operate due to any hardware failure, MikroTik VRRP uses another backup router for internet gateway until the running router comes back [...]
More Similar Content
You May Also Like
