dual unequal wan mikrotik load balancing
Most Relevant Content
MikroTik PCC Load Balancing over Unequal Dual WAN Links
Hi, you are here means you are finding a Load Balancing and Link Redundancy solution with Unequal WAN links in your MikroTik Router. If so, it is your right place. In my previous article I discussed how to configure a Dual WAN Load Balancing and Link Redundancy network using PCC method but it was assumed that both WAN links have equal bandwidth. But in real situation, you may have unequal WAN links such as ISP1 may have 10MB bandwidth and ISP2 may have 20MB bandwidth. In this case, PCC Load Balancing and Link Redundancy configuration will be a little bit different. So, in this article I will show how to configure Load Balancing and Link Redundancy network using PCC method which will have unequal Dual WAN connections. Core Devices and IP Information To configure a load balancing with failover network, I am using MikroTik RouterOS v6.38.1 that has two ISP connections and a LAN network. IP information that I am using for this network configuration are given below. ISP1 IP 192.168.30.2/30 and Gateway IP 192.168.30.1 ISP2 IP 192.168.60.2/30 and Gateway IP 192.168.60.1 LAN network: 10.10.70.0/24 and LAN Gateway IP 10.10.70.1/24 DNS IP: 8.8.8.8 and 8.8.4.4 This IP information is just [...]
- »
MikroTik Unequal Dual WAN Load Balancing with Failover using ECMP | September 15, 2019
MikroTik Router is capable of doing Load Balancing with Failover over multiple gateways. Policy Based Routing, ECMP, PCC and NTH Load Balancing are the popular load balancing methods in MikroTik Router. Among these methods, ECMP is so easy to configure and provides almost 100% load balancing and link redundancy solution. In my previous article, I discussed how to configure Load Balancing and Link Redundancy using ECMP over two equal bandwidth gateways. ECMP method is also capable of doing load balancing [...]
- »
MikroTik Load Balancing with 2 PPPoE and 1 Static WAN using ECMP | September 24, 2019
ECMP provides almost 100% reliable load balancing and link redundancy solution. ECMP is a per connection load balancing where connection is marked with source and destination IP pair. In my previous article I discussed how to configure DUAL WAN load balancing with failover using ECMP method where WAN connections were static IP Addresses. But some ISP companies use PPPoE service for their client connection. So, some network administrators become confused to configure load balancing with PPPoE WAN connection because PPPoE [...]
- »
MikroTik Load Balancing and Link Redundancy with ECMP | October 28, 2016
Load balancing and link redundancy is the main concern to any network administrator. Because, they always want to keep live their network 24/7. If you have multiple WAN connections, you can easily make a load balancing as well as link redundancy network with MikroTik Router. Different types of load balancing and link redundancy are present in MikroTik Router. ECMP Load Balancing is one of them. ECMP is so easy to implement and it provides an perfect load balancing solution. In this [...]
- »
MikroTik OpenVPN Setup with Windows Client | April 2, 2018
VPN (Virtual Private Network) technology provides a secure and encrypted tunnel across a public network. So, a private network user can send and receive data to any remote private network through VPN tunnel as if his/her network device was directly connected to that private network. MikroTik OpenVPN Server provides a secure and encrypted tunnel across public network for transporting IP traffic using PPP. OpenVPN uses SSL Certificates. So, OpenVPN Tunnel is a trusted tunnel to send and receive data across [...]
- »
MikroTik VLAN and Bridge Configuration | September 19, 2017
VLAN and Bridge are two useful features in MikroTik Router. These two features are frequently used in any MikroTik network configuration. VLAN divides a physical interface into multiple logical interfaces. So, you can isolate your network into multiple logical networks on a physical interface. On other hand, MikroTik Bridge integrates multiple physical interfaces in a logical interface. So, you can extend your broadcast domain on multiple physical interfaces and can extend your popular services such as PPPoE or DHCP on [...]
- »
Getting Started with Red Hat Linux | May 20, 2017
Red Hat Linux is an open source server operating system. Although open source Red Hat is a commercial Linux distribution. So, most of the Linux administrators use CentOS because CentOS is a free and open source, enterprise-class and community-supported server platform as well as it is functionally compatible with Red Hat Enterprise Linux. In my previous article, I showed how to install CentOS 7 core packages in your server machine. Today I will introduce you with Red Hat Linux’s command [...]
- »
Computer Network Topology Outline | September 12, 2017
The first thing that has to study about a network is its physical shape or design layout. It will be extremely important when a wiring scheme and design are selected for a new network installation. Actually Network Topology refers to physical shape or design layout of a network. Network topology determines how different nodes in a network are connected and how these nodes communicate to each other. Types of Computer Network Topology Network really has two shapes or two types [...]
- »
How to Buy a Good WiFi Router for Home or Office | October 12, 2021
You are here because you want to buy a WiFi Router and want to know how to buy a good WiFi Router for your home or office or business. A lot of wireless routers are nowadays available in the market. But before buying a WiFi Router, you should know which one is a good WiFi Router for your need based on some features and specifications of the router. We will now see some key points those should have well understand [...]
- »
How to Install Extra Packages in MikroTik RouterOS | October 10, 2019
MikroTik RouterOS does not always include all the packages those are developed by MikroTik team. So, sometimes you may find that some packages are missing in your RouterOS such as NTP package, DUDE package, Wireless package, CAPsMAN package and so on. Specially, user manager package which is totally a separate MikroTik RADIUS package used to manage user authentication, authorization and accounting is always missing. Also upgrading RouterOS or downgrading RouterOS you may find that some packages are missing there. So, [...]
More Similar Content
You May Also Like
