dual unequal wan mikrotik load balancing
Most Relevant Content
MikroTik PCC Load Balancing over Unequal Dual WAN Links
Hi, you are here means you are finding a Load Balancing and Link Redundancy solution with Unequal WAN links in your MikroTik Router. If so, it is your right place. In my previous article I discussed how to configure a Dual WAN Load Balancing and Link Redundancy network using PCC method but it was assumed that both WAN links have equal bandwidth. But in real situation, you may have unequal WAN links such as ISP1 may have 10MB bandwidth and ISP2 may have 20MB bandwidth. In this case, PCC Load Balancing and Link Redundancy configuration will be a little bit different. So, in this article I will show how to configure Load Balancing and Link Redundancy network using PCC method which will have unequal Dual WAN connections. Core Devices and IP Information To configure a load balancing with failover network, I am using MikroTik RouterOS v6.38.1 that has two ISP connections and a LAN network. IP information that I am using for this network configuration are given below. ISP1 IP 192.168.30.2/30 and Gateway IP 192.168.30.1 ISP2 IP 192.168.60.2/30 and Gateway IP 192.168.60.1 LAN network: 10.10.70.0/24 and LAN Gateway IP 10.10.70.1/24 DNS IP: 8.8.8.8 and 8.8.4.4 This IP information is just [...]
- »
MikroTik Unequal Dual WAN Load Balancing with Failover using ECMP | September 15, 2019
MikroTik Router is capable of doing Load Balancing with Failover over multiple gateways. Policy Based Routing, ECMP, PCC and NTH Load Balancing are the popular load balancing methods in MikroTik Router. Among these methods, ECMP is so easy to configure and provides almost 100% load balancing and link redundancy solution. In my previous article, I discussed how to configure Load Balancing and Link Redundancy using ECMP over two equal bandwidth gateways. ECMP method is also capable of doing load balancing [...]
- »
MikroTik Load Balancing with 2 PPPoE and 1 Static WAN using ECMP | September 24, 2019
ECMP provides almost 100% reliable load balancing and link redundancy solution. ECMP is a per connection load balancing where connection is marked with source and destination IP pair. In my previous article I discussed how to configure DUAL WAN load balancing with failover using ECMP method where WAN connections were static IP Addresses. But some ISP companies use PPPoE service for their client connection. So, some network administrators become confused to configure load balancing with PPPoE WAN connection because PPPoE [...]
- »
MikroTik Load Balancing and Link Redundancy with ECMP | October 28, 2016
Load balancing and link redundancy is the main concern to any network administrator. Because, they always want to keep live their network 24/7. If you have multiple WAN connections, you can easily make a load balancing as well as link redundancy network with MikroTik Router. Different types of load balancing and link redundancy are present in MikroTik Router. ECMP Load Balancing is one of them. ECMP is so easy to implement and it provides an perfect load balancing solution. In this [...]
- »
MikroTik User Manager RADIUS Installation on RouterOS 7 | July 5, 2022
The User Manager is a MikroTik provided RADIUS Server packages. It can be used to manage users for small or medium level business. User Manger is not a default RouterOS packages. So, we have to install user manager as an extra package in RouterOS 7. RouterOS 7 has brought a massive change on User Manager package. The most important change is managing User Manager from Winbox while in RouterOS 6 the User Manager package can only be managed from Web [...]
- »
MikroTik Router Static DHCP Server Configuration | October 25, 2015
DHCP Server assigns IP address and other related IP information (Subnet mask, Gateway and DNS) automatically to network devices. But automatic DHCP Server has some disadvantages too. If any IP device connects to any automatic DHCP network, the device will get an IP address and related IP information automatically by the DHCP Server and the device will start to use resources of this network. In this situation, the network administrator cannot know who is being connected to the network and [...]
- »
MikroTik Firewall Basic Concept | October 6, 2017
MikroTik Firewall functions as a network security tool for preventing unauthorized access to networks as well as provides Network Address Translation functionality. So, a network administrator who is using MikroTik Router in his network cannot go a single day without MikroTik Firewall. Actually, the main duty of a MikroTik administrator is to maintain Firewall properly along with Bandwidth management after completing MikroTik Router basic configuration. So, a MikroTik administrator should have enough knowledge on MikroTik Firewall and so this article [...]
- »
MikroTik Bandwidth Management using Simple Queue | September 3, 2015
MikroTik is one of the most popular routers in computer networking. It is said that no office or ISP company cannot go a single day without MikroTik Router. MikroTik Router is also a popular router to a network administrator because MikroTik Router is easily maintainable with graphical user interface software named winbox than other routers. A lot of services are available in MikroTik router to run a network smoothly. Among these services, Bandwidth Management Service is the most popular service in [...]
- »
MikroTik Block Website (Facebook, YouTube and Other Sites) | October 12, 2017
MikroTik Firewall is a powerful security tool that can be used to block unwanted websites. If you are a network administrator, sometimes it may be your requirement to block any website like Facebook, YouTube, Pornographic site and so on. To block these types of websites, you just need to create Firewall Rules that will drop any connection to these websites through your MikroTik Router. MikroTik Firewall basic concept such as what is MikroTik Firewall, what is MikroTik Firewall Rule, how [...]
- »
User Management in Linux (Red Hat/CentOS) | September 28, 2017
User management is an important part of Linux (especially Red Hat Enterprise Linux) system administration. Linux users can be administrated using user or group administration GUI (Graphical User Interface) tool as well as through Red Hat/CentOS Linux command prompt. But I will always suggest you to do command line user administration as much as possible because in production GUI will not be provided always. Many people who are learning Linux administration do not know all features of user administration command [...]
More Similar Content
You May Also Like
