how to combine two internet connections into one
Most Relevant Content
MikroTik Dual WAN Load Balancing with Failover using PCC
Hi geek, going through this article means you are finding Load Balancing as well as Link Redundancy solution for your MikroTik network because you already have multiple WAN connections or you are planning to lease multiple WAN connections. MikroTik has various Load Balancing and Link Redundancy methods such as ECMP, PCC and so on. ECMP method provides an easy configurable load balancing with failover solution but it has some known issues too in a large network. On the hand, PCC provides 100% reliable load balancing and link redundancy solution but the configuration is a little bit complex. In my previous article I discussed how to easily configure ECMP Load Balancing and Link Redundancy network and in this article I will discuss how to configure PCC Load Balancing and Link Redundancy network with MikroTik Router over Dual Gateway. Core Devices and IP Information To configure a load balancing with failover network, I am using MikroTik RouterOS v6.38.1 that has two ISP connections and a LAN network. IP information that I am using for this network configuration are given below. ISP1 IP 192.168.30.2/30 and Gateway IP 192.168.30.1 ISP2 IP 192.168.60.2/30 and Gateway IP 192.168.60.1 LAN network: 10.10.70.0/24 and LAN Gateway IP 10.10.70.1/24 [...]
- »
MikroTik WiFi Frequency Band and Channel Width Explanation | January 10, 2020
MikroTik WiFi frequency, band and channel width tuning is an important task in any wireless network. If we fail to setup WiFi frequency and channel width parameter properly, we will notice a poor performance of wireless network. WiFi is aimed at use within unlicensed spectrum and the unlicensed spectrum that is usually used for WiFi is 2.4 GHz and 5 GHz band. 2.4 GHz and 5 GHz bands have multiple channels and these channels must be setup properly to get [...]
- »
How to Install MikroTik CHR on VMware Workstation | September 9, 2019
MikroTik is found both RouterBoard where RouterOS and License are prebuilt and RouterOS Application that can be installed on a Physical Machine or Virtual Machine. RouterOS installation on Physical or Virtual Machine has license limitations. Full RouterOS packages cannot be used more than 24 hours without license. So, RouterOS application is not suitable for the Trainee or not suitable to RND purpose. From RouterOS v6.34, MikroTik introduces Cloud Hosted Router (CHR, a new RouterOS version) which has different licensing scheme. [...]
- »
How to Properly Downgrade MikroTik RouterOS and Firmware | October 2, 2019
MikroTik RouterOS is in constant development and new features or bug fixes are frequently available, sometimes even monthly. So, it is always recommend upgrading MikroTik RouterOS to a latest and stable version before beginning any configuration. But sometimes you may face that the upgraded version is not working properly according to your demand or you may upgrade to a new version that you don’t want. In this case, you should come back to your workable RouterOS version and firmware. Upgrading RouterOS [...]
- »
MikroTik VLAN and Bridge Configuration | September 19, 2017
VLAN and Bridge are two useful features in MikroTik Router. These two features are frequently used in any MikroTik network configuration. VLAN divides a physical interface into multiple logical interfaces. So, you can isolate your network into multiple logical networks on a physical interface. On other hand, MikroTik Bridge integrates multiple physical interfaces in a logical interface. So, you can extend your broadcast domain on multiple physical interfaces and can extend your popular services such as PPPoE or DHCP on [...]
- »
MikroTik UserMan RADIUS Server Customers, Users and Routers | November 13, 2017
MikroTik User Manager RADIUS Server is a centralized user authentication and accounting application that gives the ISP Company or network administrator ability to manage MikroTik RouterOS user, PPP user and Hotspot user so smoothly. There are two methods to install MikroTik User Manager RADIUS Server in your network. You can install User Manager Package either on a physical RouterOS or on a dedicated Server Machine or on a Personal Computer where RouterOS is running. How to install and configure User [...]
- »
MikroTik Port Forwarding using Winbox | July 23, 2018
MikroTik Port Forwarding or Port Mapping is a NAT application that is used to redirect a request from MikroTik IP address and port number combination to a local IP address and port number. For example, if you have a Web Server or FTP Server in your private/local area and want to access this local server from outside of your local area (from internet/public), you can apply MikroTik port forwarding or port mapping and can easily access your Web Server or [...]
- »
MikroTik Bandwidth and Resource Monitoring with Graphs | January 31, 2018
“Am I getting my committed bandwidth?” is a common question to any network administrator. This question may arise either from your customer or from your owner if you are an employee of any organization. If you feel boring hearing this question and want to establish a system where your customer will be able to inspect his bandwidth usage, MikroTik Graphing is your best friend. MikroTik Graphing can be used to display graphics for traffic which is passed through interfaces and [...]
- »
MikroTik Configuration with DHCP WAN Connection | March 24, 2019
MikroTik Router is one of the most popular routers because of having a lot of networking features. MikroTik DHCP Client is a special feature that is used to connect to any DHCP Server. So, if any uplink ISP provides DHCP connection, MikroTik Router is able to connect that DHCP Server using this DHCP Client. In my previous article, I discussed how to configure MikroTik Router with PPPoE WAN Connection. In this article, I will discuss how to configure MikroTik Router [...]
- »
PPPoE Server Configuration in MikroTik RouterOS 7 | December 2, 2023
MikroTik PPPoE is a client-server protocol and mostly used at the end ISP configuration where MikroTik RouterOS acts as a PPPoE Server and user’s WiFi Router acts as PPPoE client. MikroTik PPPoE Server can be used with MikroTik simple queue management. So, it helps to manage user’s bandwidth easily. People who are trying to do internet business should learn MikroTik PPPoE Server. Configuring PPPoE Server in MikroTik RouterOS 7 is so easy. If you have knowledge on basic RouterOS 7 [...]
You May Also Like
