how to configure static dhcp and radius server
Most Relevant Content
MikroTik DHCP Server Configuration with Radius Server
The Dynamic Host Configuration Protocol (DHCP) is a client-server protocol that is used to assign an IP address and other network configuration parameters dynamically to each device on a network so that they can communicate with other IP networks. DHCP Server is popularly used in an Enterprise Office Network because in an office network various types of IP devices such as Laptop, Desktop, Tablet, Smartphone, IP Phone and so on are maintained and almost all IP devices support DHCP. An ISP Network can also be maintained with DHCP Server. MikroTik Router has a built-in DHCP Service that can easily be used to manage DHCP enabled devices. Along with MikroTik DHCP Server, MikroTik User Manager Radius Server can also be used to manage DHCP clients and their bandwidth so efficiently. So, if you design your network with MikroTik DHCP Server and User Manager Radius Server, your network will be an easily manageable and smart network. In this article, I will discuss how to configure a static DHCP Server in MikroTik Router with User Manager Radius Server and manage DHCP clients/users so easily and efficiently. Article Purpose The purpose of this article is to design a smart and easily manageable network with MikroTik DHCP Service and MikroTik [...]
- »
MikroTik Wireless AP Configuration with DHCP using Winbox | October 22, 2019
MikroTik Wireless Router is one of the most popular and stable WiFi Routers. WiFi Zone for an ISP or for an office or for a home can easily be configured with MikroTik WiFi Router. MikroTik has a lot of WiFi Routers that can be used as a WiFi Access Point (AP), a WiFi Station or a WiFi Repeater. MikroTik Wireless Router can also be used as both WiFi Station and WiFi AP simultaneously. The simple usage of MikroTik Wireless Router [...]
- »
MikroTik Router First Time Startup and Setup using WebFig | April 17, 2018
I guess, you have purchased a new MikroTik Router or installed a new MikroTik RouterOS on PC and you are searching How to Start MikroTik Router First Time and How to Complete Basic RouterOS Configuration using WebFig (Web Interface) for running a basic network. If these are your concern, don’t worry, in this article I will show how to startup your MikroTik Router first time and complete RouterOS basic configuration using WebFig web interface so easily. There are three methods [...]
- »
Mikrotik Router Basic Configuration Using Winbox | August 24, 2015
MikroTik is one of the most popular routers. MikroTik Router has a lot of networking services that help to build a stable and smooth network so easily. It is said that any ISP Company or any Enterprise Office cannot go a single day without MikroTik Router. So, system administrators who are not using MikroTik Router yet, they will soon start using MikroTik Router, I think. As a system administrator, I am also using MikroTik Router about 5 years in my network [...]
- »
MikroTik VRRP Configuration with DHCP Server | October 22, 2018
MikroTik VRRP (Virtual Router Redundancy Protocol) ensures high available internet network. If any organization requires uninterrupted internet connection, MikroTik VRRP implementation will be a vital solution for them. MikroTik VRRP creates a virtual router accumulating two or more physical routers and ensures uninterrupted internet connection keeping activate one physical router always. That means, if any physical router fails to operate due to any hardware failure, MikroTik VRRP uses another backup router for internet gateway until the running router comes back [...]
- »
How to Use Old Router as Range Extender to Boost WiFi Signal | October 7, 2019
WiFi is a technology to turn wired internet into WiFi internet and used in every home and office. Wireless internet gives you the freedom to use the internet without sitting in a single place. It is also true that speed performance drop in Wi-fi due to weak signal or interference. Sometimes laying a physical wired connection in every room is not possible. So Wi-Fi range extender setup helps you to boost signal strength. Instead of buying a new range extender [...]
- »
How to Block MAC Address in MikroTik RouterOS 7 | July 11, 2024
MikroTik RouterOS 7 by default allows any MAC address to get internet connection through it. But we may need to block some MAC addresses sometimes. There are three methods to block MAC address in MikroTik RouterOS 7 – Blocking MAC Address using Bridge Filter Rule. Blocking MAC Address using Firewall Filter Rule and Blocking MAC Address from DHCP Lease. We can use any of these methods if we want to block MAC Address in MikroTik Router. In this article, we [...]
- »
Boost Network Performance with MikroTik FastTrack in RouterOS 7 | October 27, 2025
Network administrators often face the challenge of balancing speed and stability. MikroTik’s FastTrack feature, introduced in earlier RouterOS versions and optimized in RouterOS 7, is a game-changing solution that dramatically enhances performance by reducing CPU load and improving packet handling efficiency. 🚀 What Is MikroTik FastTrack? FastTrack is a special processing method in RouterOS that allows packets from established and related connections to bypass the standard connection tracking process. In simple terms, once a connection is identified as safe and [...]
- »
MikroTik Hotspot with Data Limit and Prepaid Billing System | January 19, 2018
If you are a network administrator and want to establish a network that will have data limitation package with prepaid billing system, MikroTik Hotspot Server with MikroTik User Manager Radius Server will be your best solution. Because, MikroTik User Manager is a poplar Radius application that will give facility to manage user data package as well as prepaid billing system efficiently. On the other hand, MikroTik Hotspot is a popular service that will help to connect your network user without [...]
- »
Restrict Internet Access Based on MAC Address in MikroTik | February 4, 2017
MikroTik router has a lot of features by which a network administrator can design his network as he likes. As a network administrator, sometimes you may need to allow internet access some specific devices. If other devices try to access internet, they will be rejected by your router. For example, say, you have configured a simple network like below diagram. In this network, you have configured WAN, LAN, Gateway, DNS and NAT. Also you have created queue rules for limiting [...]
More Similar Content
You May Also Like
