how to setup site to site openvpn
Most Relevant Content
MikroTik Site to Site OpenVPN Server Setup (RouterOS Client)
VPN (Virtual Private Network) technology provides a secure and encrypted tunnel across a public network. So, a private network user can send and receive data to any remote private network through VPN tunnel as if his/her network device was directly connected to that private network. MikroTik OpenVPN Server provides a secure and encrypted tunnel across public network for transporting IP traffic using PPP. OpenVPN Server uses SSL Certificates. So, OpenVPN Tunnel is a trusted tunnel to send and receive data across public network. MikroTik OpenVPN Server can be applied in two methods. Connecting remote workstation/client with OpenVPN: In this method, OpenVPN client software, installed any operating system such as Windows, can communicate with MikroTik OpenVPN server through OpenVPN tunnel whenever required and can access remote private network as if it was directly connected to the remote private network. Site to Site OpenVPN: This method is also known as VPN between routers. In this method, an OpenVPN client supported router always establishes an OpenVPN tunnel with MikroTik OpenVPN Server. So, private networks of these routers can communicate with each other as if they were directly connected to the same router. The goal of this article is to create a site to [...]
- »
WireGuard VPN Setup in MikroTik RouterOS7 with Windows OS | August 14, 2022
VPN (Virtual Private Network) is one of the most popular services in MikroTik RouterOS. A lot of VPN services (IPsec, EoIP, OpenVPN, PPTP, L2TP, IPIP etc.) are available in MikroTik RouterOS but in RouterOS7, a new VPN service named WireGuard has been introduced which is extremely simple yet first, secure and modern VPN. WireGuard uses cryptography to make it secure. In RouterOS7, WireGuard can be used either Client-Server (Road Warrior) VPN tunnel or site to site VPN tunnel. Using Client-Server [...]
- »
MikroTik OpenVPN Setup with Windows Client | April 2, 2018
VPN (Virtual Private Network) technology provides a secure and encrypted tunnel across a public network. So, a private network user can send and receive data to any remote private network through VPN tunnel as if his/her network device was directly connected to that private network. MikroTik OpenVPN Server provides a secure and encrypted tunnel across public network for transporting IP traffic using PPP. OpenVPN uses SSL Certificates. So, OpenVPN Tunnel is a trusted tunnel to send and receive data across [...]
- »
MikroTik VLAN Routing Configuration with Manageable Switch | July 11, 2018
A VLAN (Virtual LAN) is a group of computers, servers, network printers and other network devices that behave as if they were connected to a single network. VLAN is a logical topology that divides a single broadcast domain into multiple broadcast domains. VLAN is a layer 2 method. So, a manageable switch is required to manage VLAN in your network and a router is required to route and control your inter-VLAN. VLAN increases network security and performance as well as [...]
- »
Ubuntu Server Set Static IP Address with Netplan | July 1, 2021
Ubuntu Server is one of the most popular open source sever operating systems. Ubuntu Server can be used in production without any hassle. In my previous article, I discussed how to install Ubuntu Server’s latest version (Ubuntu Server 20.04) with LVM. In this article, we are going to see how to assign static IP address in Ubuntu Server with Netplan network management tool. Netplan Since Ubuntu Server 17.10, Netplan is being used as the default network management tool instead of [...]
- »
MikroTik Hotspot Auto Login by MAC Address | July 1, 2020
Hotspot is an awesome service in MikroTik Router. MikroTik Hotspot is popularly used in ISP, Hotel, Airport, Coffee Shop, Enterprise office and many other organizations. By default MikroTik Hotspot uses HTTP CHAP login method where user must provide username and password to get internet service. Sometimes we may face that some users are not eager to provide username and password to get internet service or we cannot ask some users to put username and password to get internet due to [...]
- »
VMware ESXi 6.7 Installation and Basic Configuration | November 17, 2020
VMware vSphere is the pioneer in virtualization. No other virtualization software is as feature rich as VMware vSphere. More than 500,000 enterprise data center are now using VMware vSphere. It is expected that most of the data center will be turned into virtualization near future. As VMware vSphere provides more feature than any other virtualization software, it is also expected that demand of VMware vSphere will be increased day by day. VMware ESXi is the foundation of VMware vSphere and [...]
- »
MikroTik WebProxy Log Analyzer Configuration | August 30, 2016
MikroTik RouterOS generally logs various system events and status information. Logs are mainly saved in router’s memory (RAM) or disk. MikroTik logs can also be sent by email or even can be sent to a remote syslog server. All logs those are saved in router’s local memory can be viewed from Log menu. Any log entry that is saved in local memory contains time and date when event occurred, topics that this message belongs to and message itself. But local [...]
- »
MikroTik Wireless AP Configuration with DHCP using Winbox | October 22, 2019
MikroTik Wireless Router is one of the most popular and stable WiFi Routers. WiFi Zone for an ISP or for an office or for a home can easily be configured with MikroTik WiFi Router. MikroTik has a lot of WiFi Routers that can be used as a WiFi Access Point (AP), a WiFi Station or a WiFi Repeater. MikroTik Wireless Router can also be used as both WiFi Station and WiFi AP simultaneously. The simple usage of MikroTik Wireless Router [...]
- »
MikroTik DHCP Server Configuration in RouterOS 7 | October 14, 2015
Dynamic Host Configuration Protocol (DHCP) is a client/server protocol. DHCP server automatically provides an Internet Protocol (IP) address and other related information such as subnet mask, default gateway and DNS to DHCP clients. DHCP server and client use UDP port 67 and 68 for communication. In a network, a DHCP client (IP devices such as Desktop, Laptop, Smartphone etc.) requests for an IP lease to DHCP servers and a DHCP server responses allocating IP address and other related IP information [...]
More Similar Content
You May Also Like
