ipsec gre tunnel configuration
Most Relevant Content
MikroTik Site to Site GRE Tunnel Configuration with IPsec
VPN (Virtual Private Network) is a technology that provides a secure tunnel across a public network. A private network user can send and receive data to any remote private network using VPN Tunnel as if his/her network device was directly connected to that private network. MikroTik provides GRE (Generic Routing Encapsulation) tunnel that is used to create a site to site VPN tunnel. GRE tunneling protocol which can encapsulate a wide variety of protocols creating a virtual point-to-point link was originally developed by Cisco. GRE is a stateless tunnel like EoIP and IPIP. That means if the remote end of the tunnel goes down, all traffic that was routed over the tunnels will get blackholed. To solve this problem, RouterOS have added ‘keepalive’ feature for GRE tunnels. By default keepalive is set to 10 seconds and 10 retries. GRE adds an outer header mentioning the entry point of the tunnel (SourceIP) and the exit point of the tunnel (DestinationIP) but the inner packet is kept unmodified. GRE tunnel only encapsulates IP packets but does not provide authentication and encryption. GRE tunnel with IPsec ensures IP packet encapsulation as well as authentication and encryption. IPsec usage makes your packets secure but [...]
- »
6 Best VPN Providers to Consider in 2022 | October 19, 2021
There are many VPN providers on the market. It can be difficult to know which one is best for you, but luckily we have compiled a list of six of the best! Get ready for our top picks. What is a VPN? A VPN, or virtual private network, hides and encodes your internet traffic so that you can surf the web more securely. By doing so, it protects your data from hackers and prying eyes. Think of a VPN as [...]
- »
MikroTik PPPoE Server with Radius User Authentication | December 17, 2017
MikroTik PPPoE Server is popularly used in ISP Companies. Almost all Local ISP Companies use PPPoE service to manage their client’s connection. So, PPPoE Server Configuration places an important role in MikroTik RouterOS. MikroTik PPPoE Server configuration with local user database has been discussed in my previous article that is enough to manage PPPoE users for a single RouterOS. But if you have more than one RouterOS in your network or you need to manage your users remotely and more [...]
- »
MikroTik Port Forwarding using Winbox | July 23, 2018
MikroTik Port Forwarding or Port Mapping is a NAT application that is used to redirect a request from MikroTik IP address and port number combination to a local IP address and port number. For example, if you have a Web Server or FTP Server in your private/local area and want to access this local server from outside of your local area (from internet/public), you can apply MikroTik port forwarding or port mapping and can easily access your Web Server or [...]
- »
FreeRADIUS User Profile Configuration for MikroTik Router | January 10, 2019
FreeRADIUS is a high performance RADIUS application that accepts a large number of network devices as RADIUS Client including MikroTik Router. FreeRADIUS MySQL module helps to get user authentication and authorization information from database server and to store user accounting information in database server. Configuring MySQL user group and profile properly, freeRADIUS user restriction can easily be maintained. How to configure user group to apply user limitation was discussed in my previous article. In this article, I will discuss how [...]
- »
MikroTik Multiple SSID with Separate LAN and DHCP Server | October 30, 2019
One of the most amazing features of MikroTik Wireless Router is creating Multiple SSID (Virtual AP) on a physical wireless interface. So, creating a Guest WiFi AP with separate LAN block, SSID and DHCP Server is so easy using MikroTik WiFi AP Router. In the previous article, I discussed how to configure MikroTik WiFi Access Point on physical wireless interface with DHCP Server using hAP Lite (RB941-2nD) Wireless Router. In this article I will discuss how to configure a Virtual [...]
- »
NGINX Web Server Installation and Configuration in Ubuntu | September 7, 2024
NGINX is a feature rich and high-performance software which is mainly used for Web Server. NGINX can also be used as a proxy server, load balancer, mail proxy and HTTP Cache Server. NGINX is a free and open-source software and can be run on Linux, Windows. macOS and other operating systems. NGINX is a single-thread based application. So, it can handle unlimited client requests using asynchronous technique. NGINX processes highly efficient run loops in a single-thread process called workers. Workers accept [...]
- »
How to Use Old Router as Range Extender to Boost WiFi Signal | October 7, 2019
WiFi is a technology to turn wired internet into WiFi internet and used in every home and office. Wireless internet gives you the freedom to use the internet without sitting in a single place. It is also true that speed performance drop in Wi-fi due to weak signal or interference. Sometimes laying a physical wired connection in every room is not possible. So Wi-Fi range extender setup helps you to boost signal strength. Instead of buying a new range extender [...]
- »
MikroTik User Manager RADIUS Installation on RouterOS 7 | July 5, 2022
The User Manager is a MikroTik provided RADIUS Server packages. It can be used to manage users for small or medium level business. User Manger is not a default RouterOS packages. So, we have to install user manager as an extra package in RouterOS 7. RouterOS 7 has brought a massive change on User Manager package. The most important change is managing User Manager from Winbox while in RouterOS 6 the User Manager package can only be managed from Web [...]
- »
MikroTik Unequal Dual WAN Load Balancing with Failover using ECMP | September 15, 2019
MikroTik Router is capable of doing Load Balancing with Failover over multiple gateways. Policy Based Routing, ECMP, PCC and NTH Load Balancing are the popular load balancing methods in MikroTik Router. Among these methods, ECMP is so easy to configure and provides almost 100% load balancing and link redundancy solution. In my previous article, I discussed how to configure Load Balancing and Link Redundancy using ECMP over two equal bandwidth gateways. ECMP method is also capable of doing load balancing [...]
More Similar Content
You May Also Like
