l2tp with ipsec in mikrotik l2tp ipsec server

Most Relevant Content

  • MikroTik Site to Site VPN with L2TP/IPsec

    VPN (Virtual Private Network) is a technology that provides a secure and encrypted tunnel across a public network. A private network user can send and receive data to any remote private network using this VPN Tunnel as if his/her network device was directly connected to that private network. MikroTik L2TP server is one of the most popular VPN services. It provides a secure and encrypted tunnel across public network for transporting IP traffic using PPP. L2TP/IPsec is more secure than MikroTik PPTP VPN server because it uses IP security protocol suite that authenticates and encrypts the packets of data send over a network. MikroTik L2TP Server can be applied in two methods. Connecting remote workstation/client: In this method, a L2TP client supported operating system such as Windows can communicate with MikroTik L2TP server through L2TP tunnel whenever required and can access remote private network as if it was directly connected to the remote private network. Site to Site L2TP: This method is also known as VPN between routers. In this method, a L2TP client supported router always establishes a L2TP tunnel with MikroTik L2TP Server. So, private networks of these routers can communicate to each other as if they were [...]

    READ MORE »

  • More Similar Content

  • »

    WireGuard VPN Setup in MikroTik RouterOS7 with Windows OS |   August 14, 2022

    VPN (Virtual Private Network) is one of the most popular services in MikroTik RouterOS. A lot of VPN services (IPsec, EoIP, OpenVPN, PPTP, L2TP, IPIP etc.) are available in MikroTik RouterOS but in RouterOS7, a new VPN service named WireGuard has been introduced which is extremely simple yet first, secure and modern VPN. WireGuard uses cryptography to make it secure. In RouterOS7, WireGuard can be used either Client-Server (Road Warrior) VPN tunnel or site to site VPN tunnel. Using Client-Server [...]

    READ MORE »

  • »

    MikroTik L2TP/IPsec VPN Configuration (Connecting Remote Client) |   February 26, 2018

    VPN (Virtual Private Network) is a technology that provides a secure and encrypted tunnel across a public network and using this VPN tunnel a private network user can send and receive data to any remote private network as if his/her network device was directly connected to that private network. MikroTik L2TP server is one of the most popular VPN services. It provides a secure and encrypted tunnel across public network for transporting IP traffic using PPP. L2TP/IPsec is more secure [...]

    READ MORE »

  • You May Also Like

  • »

    MikroTik Site to Site OpenVPN Server Setup (RouterOS Client) |   April 9, 2018

    VPN (Virtual Private Network) technology provides a secure and encrypted tunnel across a public network. So, a private network user can send and receive data to any remote private network through VPN tunnel as if his/her network device was directly connected to that private network. MikroTik OpenVPN Server provides a secure and encrypted tunnel across public network for transporting IP traffic using PPP. OpenVPN Server uses SSL Certificates. So, OpenVPN Tunnel is a trusted tunnel to send and receive data [...]

    READ MORE »

  • »

    MikroTik Unequal Dual WAN Load Balancing with Failover using ECMP |   September 15, 2019

    MikroTik Router is capable of doing Load Balancing with Failover over multiple gateways. Policy Based Routing, ECMP, PCC and NTH Load Balancing are the popular load balancing methods in MikroTik Router. Among these methods, ECMP is so easy to configure and provides almost 100% load balancing and link redundancy solution. In my previous article, I discussed how to configure Load Balancing and Link Redundancy using ECMP over two equal bandwidth gateways. ECMP method is also capable of doing load balancing [...]

    READ MORE »

  • »

    LVM Management in CentOS/Red Hat 7 Linux |   March 15, 2019

    LVM (Logical Volume Manager) is the recommended partition method for CentOS/Red Hat 7 Linux. Specially, if we work on Mail Server, File Server, FTP Server, Web Proxy Server or any application where disk space changes frequently, the LVM partition is mandatory in this case. In my previous article, I discussed how to install CentOS 7.5 with LVM partitioning. If you are new here or CentOS 7 is not yet installed, I will suggest you to follow my previous article and [...]

    READ MORE »

  • »

    How to Buy a Good WiFi Router for Home or Office |   October 12, 2021

    You are here because you want to buy a WiFi Router and want to know how to buy a good WiFi Router for your home or office or business. A lot of wireless routers are nowadays available in the market. But before buying a WiFi Router, you should know which one is a good WiFi Router for your need based on some features and specifications of the router. We will now see some key points those should have well understand [...]

    READ MORE »

  • »

    Computer Network Topology Outline |   September 12, 2017

    The first thing that has to study about a network is its physical shape or design layout. It will be extremely important when a wiring scheme and design are selected for a new network installation. Actually Network Topology refers to physical shape or design layout of a network. Network topology determines how different nodes in a network are connected and how these nodes communicate to each other. Types of Computer Network Topology Network really has two shapes or two types [...]

    READ MORE »

  • »

    MikroTik Wireless AP Configuration with DHCP using Winbox |   October 22, 2019

    MikroTik Wireless Router is one of the most popular and stable WiFi Routers. WiFi Zone for an ISP or for an office or for a home can easily be configured with MikroTik WiFi Router. MikroTik has a lot of WiFi Routers that can be used as a WiFi Access Point (AP), a WiFi Station or a WiFi Repeater. MikroTik Wireless Router can also be used as both WiFi Station and WiFi AP simultaneously. The simple usage of MikroTik Wireless Router [...]

    READ MORE »

  • »

    MikroTik User Manager Installation and Basic Configuration |   December 15, 2019

    MikroTik User Manager is a RADIUS application developed by MikroTik team and can be used without charge. User Manager is used for authentication, authorization and accounting of MikroTik RouterOS, PPPoE, Hotspot, DHCP and Wireless users. Although User Manager Package is developed by MikroTik it will not be found in RouterOS by default. So, we have to install User Manager Package manually if we wish to use this RADIUS application. User Manager can be installed on MikroTik RouterBOARD, MikroTik CHR or [...]

    READ MORE »