lvcreate
Most Relevant Content
LVM Management in CentOS/Red Hat 7 Linux
LVM (Logical Volume Manager) is the recommended partition method for CentOS/Red Hat 7 Linux. Specially, if we work on Mail Server, File Server, FTP Server, Web Proxy Server or any application where disk space changes frequently, the LVM partition is mandatory in this case. In my previous article, I discussed how to install CentOS 7.5 with LVM partitioning. If you are new here or CentOS 7 is not yet installed, I will suggest you to follow my previous article and install CentOS 7 with LVM partitioning and then continue this article. In this article, I will discuss how to manage LVM partitioning in CentOS/ Red Hat 7 Linux with the command line utility. Basic Components and Architecture of LVM Before going to start LVM management with command line tool, we should have basic knowledge on the basic LVM terms and architecture. The following three terms are the basic components of the LVM partitioning. Physical Volume: The underlying physical storage unit of an LVM is a block device such as a partition of a disk or the whole disk. To use the block device for an LVM logical volume, the device must be initialized as a physical volume (PV). Volume Groups: [...]
- »
CentOS 7 Partition Management with fdisk Utility | February 11, 2019
CentOS or Red Hat Linux is a popular server operating system to the system administrators. Almost all the system admins or IT guys who play with mail server, file server, proxy server and so on are so known with CentOS or Red Hat Linux and cannot go a single day without this operating system. The guys who are also wish to be a system admin should be familiar with CentOS or Red Hat operating system. In my previous article, I [...]
- »
WireGuard Site to Site VPN Between MikroTik RouterOS 7 | September 29, 2022
WireGuard is a free, open source, secure and high-speed modern VPN solution. WireGuard is extremely easy to implement but utilizes state-of-the-art cryptography. WireGuard can be used as either Client-Server VPN technology or Site to Site VPN technology. From the RouterOS 7, MikroTik introduces WireGuard VPN as their native package. So, who are using RouterOS 7 can use WireGuard VPN and can implement both client-server and site to site VPN with WireGuard free VPN server. In my previous article, I discussed [...]
- »
Guest WiFi – How to Setup on MikroTik AP | April 30, 2024
Guest WiFi helps to keep your network safe and secure. Any sensitive wireless network should have a guest network. So, Guest WiFi is so essential for an office network. In a corporate office, guests or visitors frequently come and get connected to get internet for a few times. It is so much security issue to keep guest or visitor in the core network because among them someone can damage important network resources. So, to keep them isolated from the core [...]
- »
Static Routing Configuration in MikroTik Router | February 11, 2018
Static Routing is an important topic to any network administrator who works with multiple MikroTik RouterOS and wants to establish communication among Router’s local networks. For example, say a network administrator maintains two MikroTik RouterOS connected with any communication medium and each RouterOS has its own networks and network resources such as servers, printers etc. and he wants that each network and network resources will be accessible from other networks. In this case, static routing configuration between two RouterOS will [...]
- »
MikroTik VRRP Configuration with DHCP Server | October 22, 2018
MikroTik VRRP (Virtual Router Redundancy Protocol) ensures high available internet network. If any organization requires uninterrupted internet connection, MikroTik VRRP implementation will be a vital solution for them. MikroTik VRRP creates a virtual router accumulating two or more physical routers and ensures uninterrupted internet connection keeping activate one physical router always. That means, if any physical router fails to operate due to any hardware failure, MikroTik VRRP uses another backup router for internet gateway until the running router comes back [...]
- »
Securing MikroTik Router with Port Knocking | March 21, 2021
MikroTik Port Knocking strategy helps to protect MikroTik Router from hackers and unauthorized access as well as enhances MikroTik RouterOS security.
- »
How to Add New Domains to BIND DNS Server | July 5, 2019
DNS (Domain Name System) Server is an essential part to any computer network. So, it is always suggest keeping a DNS Server in every network. How to configure a DNS Server with BIND package was discussed in my previous article. A common question among the fresher admins of BIND DNS is how to add a new domain to BIND DNS Server. For this, this article is designed to discuss the proper way to add multiple domains to BIND DNS Server. [...]
- »
Apache2 Web Server HTTPS Configuration on Ubuntu Server | August 15, 2021
Data transmission between web server and web client over port 80 (HTTP) is not encrypted. So, any middle man between web server and web client can view transmitted data and can steal secret information. To overcome this limitation, HTTPS Protocol over port 443 has been introduced. HTTPS is a secure web server that is configured with SSL/TLS certificate. TLS (Transport Layer Security) and its predecessor SSL (Secure Sockets Layer) are web protocols used to wrap normal traffic in a protected, [...]
- »
MikroTik User Manager RADIUS Installation on RouterOS 7 | July 5, 2022
The User Manager is a MikroTik provided RADIUS Server packages. It can be used to manage users for small or medium level business. User Manger is not a default RouterOS packages. So, we have to install user manager as an extra package in RouterOS 7. RouterOS 7 has brought a massive change on User Manager package. The most important change is managing User Manager from Winbox while in RouterOS 6 the User Manager package can only be managed from Web [...]
You May Also Like
