lvm howto
Most Relevant Content
LVM Management in CentOS/Red Hat 7 Linux
LVM (Logical Volume Manager) is the recommended partition method for CentOS/Red Hat 7 Linux. Specially, if we work on Mail Server, File Server, FTP Server, Web Proxy Server or any application where disk space changes frequently, the LVM partition is mandatory in this case. In my previous article, I discussed how to install CentOS 7.5 with LVM partitioning. If you are new here or CentOS 7 is not yet installed, I will suggest you to follow my previous article and install CentOS 7 with LVM partitioning and then continue this article. In this article, I will discuss how to manage LVM partitioning in CentOS/ Red Hat 7 Linux with the command line utility. Basic Components and Architecture of LVM Before going to start LVM management with command line tool, we should have basic knowledge on the basic LVM terms and architecture. The following three terms are the basic components of the LVM partitioning. Physical Volume: The underlying physical storage unit of an LVM is a block device such as a partition of a disk or the whole disk. To use the block device for an LVM logical volume, the device must be initialized as a physical volume (PV). Volume Groups: [...]
- »
How to Customize MikroTik Hotspot Login Page | September 12, 2020
MikroTik Hotspot is an awesome service that can be customized according to any organization need. MikroTik Hotspot is able to authenticate and authorize network users so easily. Besides premium Hotspot service, it can also be used as a public Hotspot network. Although public network is a free network service, it can be a better source of income by serving ads. As no user can get internet access without visiting Hotspot login page, the login page is main space for serving [...]
- »
MikroTik Hotspot HTTPS Redirect and HTTPS Login Setup | May 24, 2020
MikroTik Hotspot is one of the most popular services in MikroTik Router. It is a policy to authorize network clients before to access local network resources as well as public network resources through MikroTik Router. In my previous article I discussed MikroTik Hotspot Configuration using Winbox. But default MikroTik Hotspot configuration faces HTTPS Redirect and HTTPS Login issues. To solve these issues, MikroTik Hotspot HTTPS configuration is required. So, in this article I will discuss how to configure MikroTik Hotspot [...]
- »
MikroTik RADIUS Server (User Manager) Installation | October 28, 2017
RADIUS Server is a centralized user authentication, authorization and accounting application. RADIUS authentication gives the ISP or network administrator ability to manage PPP users, login users and Hotspot users from one server throughout a large network. MikroTik RouterOS has a RADIUS client that is able to authenticate login users, Hotspot users and PPP users through a RADIUS server. MikroTik team also developed a totally separate RADIUS server package named User Manager that can be used to authenticate MikroTik users smoothly. [...]
- »
MikroTik IPIP Tunnel with IPsec (Site to Site VPN) | March 18, 2018
VPN (Virtual Private Network) is a technology that provides a secure tunnel across a public network. A private network user can send and receive data to any remote private network using VPN Tunnel as if his/her network device was directly connected to that private network. MikroTik provides IPIP tunnel that is used to create a site to site VPN. IPIP tunnel is a simple protocol that encapsulates IP packets in IP to make a tunnel between two routers. To encapsulate [...]
- »
How to Use Old Router as Range Extender to Boost WiFi Signal | October 7, 2019
WiFi is a technology to turn wired internet into WiFi internet and used in every home and office. Wireless internet gives you the freedom to use the internet without sitting in a single place. It is also true that speed performance drop in Wi-fi due to weak signal or interference. Sometimes laying a physical wired connection in every room is not possible. So Wi-Fi range extender setup helps you to boost signal strength. Instead of buying a new range extender [...]
- »
IP Based Virtual Hosting on CentOS 7 with Apache Server | July 18, 2019
Virtual Hosting is a method of hosting multiple domains on single web server. If you have multiple domains (such as domain1.com, domain2.com and so on) and want to host on single web server, Virtual Web Hosting is your right choice. Apache web server provides an easy way to manage Virtual Hosting. Virtual Hosting can be either Name Based or IP Based. In Name Based Virtual Hosting, multiple domains can be hosted on single IP address. On the other hand, in [...]
- »
CentOS 8 Networking Configuration Using nmtui Tool | December 14, 2020
The first task after completing CentOS 8 fresh installation is to configure its networking so that it can be accessed from other network devices. In my previous article, I discussed how to install CentOS 8 Graphical User Interface (GNOME Desktop) with step by step screenshots. If you are a new CentOS 8 user and have not yet installed CentOS 8 on your server machine, feel free to follow that article and install CentOS 8 GNOME Desktop according to the article. [...]
- »
Setting Google as Default Search Engine | September 30, 2015
Google is one of the most popular search engines to any online user. It is said that no online user cannot go a single day without Google search engine. Google search statistics shows that over 40,000 search queries are processed every second by Google. If you have any query about any subject, just type in Google search box and Google will show you billion of results related to your search query within less than a second. So, usually you will want [...]
- »
MikroTik User Management (RouterOS User) | October 22, 2017
MikroTik User Management plays an important role in MikroTik system administration as well as MikroTik security. Don’t be confused the title User Management with the MikroTik UserManager. UserManager is an optional and totally separate package distributed by MikroTik. UserManager is an implementation of Radius server that is used to maintain not only RouterOS users but also PPPoE, PPTP, Hotspot, Wireless and DHCP users. In my few future articles, I will discuss how to maintain these users with MikroTik UserManager Radius [...]
You May Also Like
