mikrotik dual wan failover with pbr

Most Relevant Content

  • MikroTik Load Balancing and Link Redundancy with PBR

    In computer networking, the Load Balancing technique is used to send network traffic over multiple gateways. If you have multiple ISP connections available, you can use load balancing technique to establish a stable network. You may now ask, why will I use multiple ISP connections? What are the benefits to use multiple ISP connections in my network? For your satisfaction, the following points are some reasons to use load balancing technique in your network. No ISP can give you 100% uptime guarantee. So, it will be better to use more than one ISP connection to ensure 100% uptime network. Sometimes you may have dependency (such as Mail, IPPBX etc.) on your uplink ISP but their service is not so good. In this case, you can use another ISP which provides better service. Your current ISP is better but high paid bandwidth. In this case, you can purchase another ISP bandwidth which is cheap but their connection is good, not better. If these are your current status, it is suggested to configure a load balancing and link redundancy network with multiple gateways. MikroTik Router has various load balancing and link redundancy methods (such as ECMP method, PCC method and PBR method) [...]

    READ MORE »

  • More Similar Content

  • »

    MikroTik Load Balancing over Multiple Gateways (2 WAN) |   October 13, 2016

    Load Balancing is a technique used to send network traffic over multiple gateways. If you have multiple ISP connections in your network, you can send your network traffic through those ISP connections and can make a load balancing network. Accidently you may ask me, why will I use multiple ISP connections? What are the benefits to use multiple ISP connections in my network? I will say, ask yourself deeply then you will find the reasons why multiple ISP connections is [...]

    READ MORE »

  • You May Also Like

  • »

    MikroTik Site to Site EoIP Tunnel with IPsec |   March 21, 2018

    VPN (Virtual Private Network) is a technology that provides a secure tunnel across a public network. A private network user can send and receive data to any remote private network using VPN Tunnel as if his/her network device was directly connected to that private network. MikroTik provides EoIP (Ethernet over IP) tunnel that is used to create a site to site VPN. EoIP tunneling is a MikroTik RouterOS protocol that creates an Ethernet tunnel between two MikroTik Routers on top [...]

    READ MORE »

  • »

    Single IP NAT Strategy in MikroTik RouterOS 7 |   September 29, 2015

    MikroTik Router has a lot of features which help to customize network as our requirement. Sometimes, it may be our requirement that we need to allow internet access on per IP. Normally, when we apply masquerade NAT rule in our MikroTik Router, all private IPs will be masqueraded or a network block will be masqueraded. If we do normal masqurade and enable a DHCP Server in our network, we may face a lot of unauthorized access in our network. Because [...]

    READ MORE »

  • »

    LVM Management in CentOS/Red Hat 7 Linux |   March 15, 2019

    LVM (Logical Volume Manager) is the recommended partition method for CentOS/Red Hat 7 Linux. Specially, if we work on Mail Server, File Server, FTP Server, Web Proxy Server or any application where disk space changes frequently, the LVM partition is mandatory in this case. In my previous article, I discussed how to install CentOS 7.5 with LVM partitioning. If you are new here or CentOS 7 is not yet installed, I will suggest you to follow my previous article and [...]

    READ MORE »

  • »

    WiFi Station Setup in MikroTik Wireless Router |   November 27, 2019

    MikroTik Wireless Router is capable of working as a WiFi Client.  So, if any ISP provides WiFi connection for their clients, MikroTik Wireless Router can be used to connect to that ISP SSID by configuring wireless station mode. MikroTik WiFi station mode finds available SSID and connects with permitted SSID.  This wireless connection can be used as wireless WAN connection and configuring LAN, multiple devices can get internet over this wireless WAN connection. In my previous article, I discussed how [...]

    READ MORE »

  • »

    How to Use Old Router as Range Extender to Boost WiFi Signal |   October 7, 2019

    WiFi is a technology to turn wired internet into WiFi internet and used in every home and office. Wireless internet gives you the freedom to use the internet without sitting in a single place. It is also true that speed performance drop in Wi-fi due to weak signal or interference. Sometimes laying a physical wired connection in every room is not possible. So Wi-Fi range extender setup helps you to boost signal strength. Instead of buying a new range extender [...]

    READ MORE »

  • »

    How to Block WiFi Access although Password is Known |   April 23, 2024

    We usually get internet connection from any ISP and buy any WiFi Router and then configure wireless/AP with password and configure DHCP Server to get connection from own WiFi devices. We use these WiFi Routers/APs at home, office, workspace or any other public places. Usually, we get connected to our WiFi using our provided WiFi password. Initially there will be no problem to keep your network safe using password authentication. But day by day your password will be known by [...]

    READ MORE »

  • »

    MikroTik Blocking All Websites Except a Few Websites |   May 7, 2019

    A few days ago, someone asked me how to block all websites except one with MikroTik Firewall. For this, I have decided to discuss about blocking all websites except someone’s whitelist. Unlike firewall devices, MikroTik Firewall by default allows all websites. So, if you need to block any website, you have to create a firewall rule that will block the specific website. Now if we want to block all websites and want to allow a few websites, we have to [...]

    READ MORE »

  • »

    MikroTik Hotspot Server Configuration in RouterOS 7 |   April 25, 2023

    MikroTik Hotspot is an awesome service to run a captive portal network. You can run a public Wi-Fi network, Hotel Network, Airport network, CAMP Wi-Fi network, Shopping Mall Network and so on using MikroTik Hotspot and even can monetize your network for earning if you use Hotspot Billing Software like GalaxyRAD which is specially designed for MikroTik Hotspot network. GalaxyRAD helps to monetize your any network providing online payment gateway as well as integrating voucher-based system. It also helps to [...]

    READ MORE »