mikrotik failover load balancing
Most Relevant Content
MikroTik Dual WAN Load Balancing with Failover using PCC
Hi geek, going through this article means you are finding Load Balancing as well as Link Redundancy solution for your MikroTik network because you already have multiple WAN connections or you are planning to lease multiple WAN connections. MikroTik has various Load Balancing and Link Redundancy methods such as ECMP, PCC and so on. ECMP method provides an easy configurable load balancing with failover solution but it has some known issues too in a large network. On the hand, PCC provides 100% reliable load balancing and link redundancy solution but the configuration is a little bit complex. In my previous article I discussed how to easily configure ECMP Load Balancing and Link Redundancy network and in this article I will discuss how to configure PCC Load Balancing and Link Redundancy network with MikroTik Router over Dual Gateway. Core Devices and IP Information To configure a load balancing with failover network, I am using MikroTik RouterOS v6.38.1 that has two ISP connections and a LAN network. IP information that I am using for this network configuration are given below. ISP1 IP 192.168.30.2/30 and Gateway IP 192.168.30.1 ISP2 IP 192.168.60.2/30 and Gateway IP 192.168.60.1 LAN network: 10.10.70.0/24 and LAN Gateway IP 10.10.70.1/24 [...]
- »
MikroTik Unequal Dual WAN Load Balancing with Failover using ECMP | September 15, 2019
MikroTik Router is capable of doing Load Balancing with Failover over multiple gateways. Policy Based Routing, ECMP, PCC and NTH Load Balancing are the popular load balancing methods in MikroTik Router. Among these methods, ECMP is so easy to configure and provides almost 100% load balancing and link redundancy solution. In my previous article, I discussed how to configure Load Balancing and Link Redundancy using ECMP over two equal bandwidth gateways. ECMP method is also capable of doing load balancing [...]
- »
MikroTik Load Balancing with 2 PPPoE and 1 Static WAN using ECMP | September 24, 2019
ECMP provides almost 100% reliable load balancing and link redundancy solution. ECMP is a per connection load balancing where connection is marked with source and destination IP pair. In my previous article I discussed how to configure DUAL WAN load balancing with failover using ECMP method where WAN connections were static IP Addresses. But some ISP companies use PPPoE service for their client connection. So, some network administrators become confused to configure load balancing with PPPoE WAN connection because PPPoE [...]
- »
MikroTik Load Balancing and Link Redundancy with PBR | March 31, 2019
In computer networking, the Load Balancing technique is used to send network traffic over multiple gateways. If you have multiple ISP connections available, you can use load balancing technique to establish a stable network. You may now ask, why will I use multiple ISP connections? What are the benefits to use multiple ISP connections in my network? For your satisfaction, the following points are some reasons to use load balancing technique in your network. No ISP can give you 100% [...]
- »
MikroTik Dual WAN PCC Load Balancing with PPPoE Server | July 5, 2018
Hi geek, you are here because you are finding a complete MikroTik Dual WAN PCC Load balancing and Link Redundancy solution with PPPoE Server because you have managed two ISP connections and want to provide an uninterrupted internet connection to your clients. You also want to manage your LAN clients with PPPoE Server because it provides a hassle free network administration. MikroTik PCC provides 100% reliable Load Balancing and Link Redundancy network and in my previous article I discussed how [...]
- »
MikroTik PCC Load Balancing over Unequal Dual WAN Links | June 12, 2018
Hi, you are here means you are finding a Load Balancing and Link Redundancy solution with Unequal WAN links in your MikroTik Router. If so, it is your right place. In my previous article I discussed how to configure a Dual WAN Load Balancing and Link Redundancy network using PCC method but it was assumed that both WAN links have equal bandwidth. But in real situation, you may have unequal WAN links such as ISP1 may have 10MB bandwidth and [...]
- »
MikroTik Load Balancing and Link Redundancy with ECMP | October 28, 2016
Load balancing and link redundancy is the main concern to any network administrator. Because, they always want to keep live their network 24/7. If you have multiple WAN connections, you can easily make a load balancing as well as link redundancy network with MikroTik Router. Different types of load balancing and link redundancy are present in MikroTik Router. ECMP Load Balancing is one of them. ECMP is so easy to implement and it provides an perfect load balancing solution. In this [...]
- »
MikroTik Load Balancing over Multiple Gateways (2 WAN) | October 13, 2016
Load Balancing is a technique used to send network traffic over multiple gateways. If you have multiple ISP connections in your network, you can send your network traffic through those ISP connections and can make a load balancing network. Accidently you may ask me, why will I use multiple ISP connections? What are the benefits to use multiple ISP connections in my network? I will say, ask yourself deeply then you will find the reasons why multiple ISP connections is [...]
More Similar Content
