mikrotik l2tp ipsec vpn
Most Relevant Content
MikroTik L2TP/IPsec VPN Configuration (Connecting Remote Client)
VPN (Virtual Private Network) is a technology that provides a secure and encrypted tunnel across a public network and using this VPN tunnel a private network user can send and receive data to any remote private network as if his/her network device was directly connected to that private network. MikroTik L2TP server is one of the most popular VPN services. It provides a secure and encrypted tunnel across public network for transporting IP traffic using PPP. L2TP/IPsec is more secure than MikroTik PPTP VPN server. MikroTik L2TP Server can be applied in two methods. Connecting remote workstation/client: In this method, a L2TP client supported operating system such as Windows can communicate with MikroTik L2TP server through L2TP tunnel whenever required and can access remote private network as if it was directly connected to the remote private network. Site-to-Site L2TP: This method is also known as VPN between routers. In this method, a L2TP client supported router always establishes a L2TP tunnel with MikroTik L2TP Server. So, private networks of these routers can communicate to each other as if they were directly connected to the same router. The goal of this article is to connect a remote client operating system using [...]
- »
MikroTik Site to Site VPN with L2TP/IPsec | March 3, 2018
VPN (Virtual Private Network) is a technology that provides a secure and encrypted tunnel across a public network. A private network user can send and receive data to any remote private network using this VPN Tunnel as if his/her network device was directly connected to that private network. MikroTik L2TP server is one of the most popular VPN services. It provides a secure and encrypted tunnel across public network for transporting IP traffic using PPP. L2TP/IPsec is more secure than [...]
- »
WireGuard VPN Setup in MikroTik RouterOS7 with Windows OS | August 14, 2022
VPN (Virtual Private Network) is one of the most popular services in MikroTik RouterOS. A lot of VPN services (IPsec, EoIP, OpenVPN, PPTP, L2TP, IPIP etc.) are available in MikroTik RouterOS but in RouterOS7, a new VPN service named WireGuard has been introduced which is extremely simple yet first, secure and modern VPN. WireGuard uses cryptography to make it secure. In RouterOS7, WireGuard can be used either Client-Server (Road Warrior) VPN tunnel or site to site VPN tunnel. Using Client-Server [...]
- »
Create System Restore Point in Windows OS | August 27, 2015
System Restore utility in windows operating system helps a windows user to take one or more snapshots of his/her windows system when windows operating system is working well. If any system crash occurs in future due to virus attack or critical system update or any unwanted program, the system can be reverted to its previous snapshot when windows OS was working well. So, System Restore utility in windows operating system is a very helpful service for windows users to protect [...]
- »
MikroTik PCC Load Balancing over Unequal Dual WAN Links | June 12, 2018
Hi, you are here means you are finding a Load Balancing and Link Redundancy solution with Unequal WAN links in your MikroTik Router. If so, it is your right place. In my previous article I discussed how to configure a Dual WAN Load Balancing and Link Redundancy network using PCC method but it was assumed that both WAN links have equal bandwidth. But in real situation, you may have unequal WAN links such as ISP1 may have 10MB bandwidth and [...]
- »
How to Separate MikroTik Hotspot and DHCP IP Pool | October 9, 2020
MikroTik default Hotspot Setup comes with a DHCP Server (which uses same IP Pool of Hotspot Server) to provide IP address and other network information to a connected device. Using this automatic IP address connected device can access Hotspot login page. After successfully login, a one to one NAT IP address is also assigned for the device and this process happens internally in Hotspot Server. User device cannot know this one to one NAT IP assigning. However, Hotspot Server actually [...]
- »
FreeRADIUS User Group Management with MySQL | January 3, 2019
FreeRADIUS is a high performance RADIUS Server. A number of network devices can be used with freeRADIUS Server as a RADIUS Client including MikroTik Router. As a modular RADIUS suite, freeRADIUS accepts MySQL module to query user authentication and authorization and to store accounting data. In my previous article, I discussed how to install and configure FreeRADIUS MySQL module. I also discussed how to authenticate MikroTik Login with freeRADIUS MySQL user. In this article, we will talk about how to [...]
- »
Ubuntu Server 20.04 Installation with LVM | May 28, 2021
Linux is a free and open source operating system developed by Linus Torvalds on September 17, 1991. It is mainly used as server environment. A lot of Linux distributions are present today. Among them, Ubuntu is one of the best stable Linux distributions. Ubuntu has both Desktop and Server distribution. Ubuntu Server is a high performance and stable enterprise Linux distribution and it can be easily used in production. Ubuntu Server has both community-support and well documentation. So, IT guys can use Ubuntu [...]
- »
HTTP vs. HTTPS: The Impact Of Using SSL Certificates | November 29, 2021
Google and cybersecurity experts continue to make clarion calls to web admins and website owners to switch from HTTP to HTTPS. But is there any difference between the two other than the extra “S” at the end of HTTPS? Not everyone understands the differences between HTTP and HTTPS and why the difference is so significant. In this post, we will discuss the differences between HTTP and HTTPS, the reasons why you need to switch from HTTP to HTTPS, and the [...]
- »
MikroTik WebProxy Log Analyzer Configuration | August 30, 2016
MikroTik RouterOS generally logs various system events and status information. Logs are mainly saved in router’s memory (RAM) or disk. MikroTik logs can also be sent by email or even can be sent to a remote syslog server. All logs those are saved in router’s local memory can be viewed from Log menu. Any log entry that is saved in local memory contains time and date when event occurred, topics that this message belongs to and message itself. But local [...]
More Similar Content
You May Also Like
