mikrotik load balancing 2 unequal wan
Most Relevant Content
MikroTik PCC Load Balancing over Unequal Dual WAN Links
Hi, you are here means you are finding a Load Balancing and Link Redundancy solution with Unequal WAN links in your MikroTik Router. If so, it is your right place. In my previous article I discussed how to configure a Dual WAN Load Balancing and Link Redundancy network using PCC method but it was assumed that both WAN links have equal bandwidth. But in real situation, you may have unequal WAN links such as ISP1 may have 10MB bandwidth and ISP2 may have 20MB bandwidth. In this case, PCC Load Balancing and Link Redundancy configuration will be a little bit different. So, in this article I will show how to configure Load Balancing and Link Redundancy network using PCC method which will have unequal Dual WAN connections. Core Devices and IP Information To configure a load balancing with failover network, I am using MikroTik RouterOS v6.38.1 that has two ISP connections and a LAN network. IP information that I am using for this network configuration are given below. ISP1 IP 192.168.30.2/30 and Gateway IP 192.168.30.1 ISP2 IP 192.168.60.2/30 and Gateway IP 192.168.60.1 LAN network: 10.10.70.0/24 and LAN Gateway IP 10.10.70.1/24 DNS IP: 8.8.8.8 and 8.8.4.4 This IP information is just [...]
- »
MikroTik Hotspot Configuration with ECMP Load Balancing | September 4, 2021
MikroTik Hotspot is one of the most popular services in MikroTik RouterOS and day be day the demand of Hotspot service is increasing. MikroTik Hotspot can be used in any Airport, Hotel, Restaurant, Campus, Camp, Office or any ISP network. It is also possible to establish a WiFi Broadband Network with the MikroTik Hotspot service. How to configure MikroTik Hotspot was discussed in one of my previous articles. Although MikroTik Hotspot configuration is not so difficult but sometimes we face [...]
- »
MikroTik Load Balancing with 2 PPPoE and 1 Static WAN using ECMP | September 24, 2019
ECMP provides almost 100% reliable load balancing and link redundancy solution. ECMP is a per connection load balancing where connection is marked with source and destination IP pair. In my previous article I discussed how to configure DUAL WAN load balancing with failover using ECMP method where WAN connections were static IP Addresses. But some ISP companies use PPPoE service for their client connection. So, some network administrators become confused to configure load balancing with PPPoE WAN connection because PPPoE [...]
- »
MikroTik Unequal Dual WAN Load Balancing with Failover using ECMP | September 15, 2019
MikroTik Router is capable of doing Load Balancing with Failover over multiple gateways. Policy Based Routing, ECMP, PCC and NTH Load Balancing are the popular load balancing methods in MikroTik Router. Among these methods, ECMP is so easy to configure and provides almost 100% load balancing and link redundancy solution. In my previous article, I discussed how to configure Load Balancing and Link Redundancy using ECMP over two equal bandwidth gateways. ECMP method is also capable of doing load balancing [...]
- »
MikroTik Load Balancing and Link Redundancy with ECMP | October 28, 2016
Load balancing and link redundancy is the main concern to any network administrator. Because, they always want to keep live their network 24/7. If you have multiple WAN connections, you can easily make a load balancing as well as link redundancy network with MikroTik Router. Different types of load balancing and link redundancy are present in MikroTik Router. ECMP Load Balancing is one of them. ECMP is so easy to implement and it provides an perfect load balancing solution. In this [...]
- »
MikroTik Bandwidth Management using Simple Queue | September 3, 2015
MikroTik is one of the most popular routers in computer networking. It is said that no office or ISP company cannot go a single day without MikroTik Router. MikroTik Router is also a popular router to a network administrator because MikroTik Router is easily maintainable with graphical user interface software named winbox than other routers. A lot of services are available in MikroTik router to run a network smoothly. Among these services, Bandwidth Management Service is the most popular service in [...]
- »
Block Internet Access at a Certain Time in MikroTik RouterOS | August 1, 2024
We often find how to block or allow internet access at a certain time in our LAN network specially in WiFi network. Time based internet access is so useful for controlling Kids internet in any family or managing stuff internet accessibility in any office or other network. MikroTik RouterOS offers a feature named Kid Control to block internet access at a certain time. This feature is so useful for the parents or network engineers who want to block internet access [...]
- »
MikroTik VRRP Configuration with Load Sharing | November 19, 2018
MikroTik VRRP (Virtual Router Redundancy Protocol) ensures high availability internet network. If any organization requires uninterrupted internet connection, MikroTik VRRP implementation will be a vital solution for them. MikroTik VRRP creates a virtual router accumulating two or more physical routers and ensures uninterrupted internet connection keeping activate one physical router always. That means, if any physical router fails to operate due to any hardware failure, MikroTik VRRP uses another backup router for internet gateway until the running router comes back [...]
- »
GNS3 Installation and Configuration Step by Step in Windows | September 14, 2018
GNS3 (Graphical Network Simulator) is one of the most popular network simulator software used by hundreds of thousands of network engineers worldwide to emulate, configure, test and troubleshoot virtual and real networks. GNS3 supports a large number of vendors such as MikroTik, Cisco, Juniper, Windows, Linux and many other vendors. GNS3 can be installed on Windows, Linux and MAC Operating System. In this article, I will show how to download and install GNS3 application in Windows Operating System. I will [...]
- »
Red Hat/CentOS 7 Linux Installation (Minimal Packages) | April 18, 2017
Linux is a free and open source operating system developed by Linus Torvalds on September 17, 1991. It is mainly used as server environment. A lot of Linux distributions are present today. Among them, Red Hat Linux is used as enterprise Linux. Red Hat is also known as Red Hat commercial Linux that means Red Hat is a paid service program. CentOS (Community Enterprise Operating System) is another Linux distribution that provides a free and open source, enterprise-class, community-supported server platform functionally [...]
More Similar Content
You May Also Like
