mikrotik load balancing pcc
Most Relevant Content
MikroTik Dual WAN Load Balancing with Failover using PCC
Hi geek, going through this article means you are finding Load Balancing as well as Link Redundancy solution for your MikroTik network because you already have multiple WAN connections or you are planning to lease multiple WAN connections. MikroTik has various Load Balancing and Link Redundancy methods such as ECMP, PCC and so on. ECMP method provides an easy configurable load balancing with failover solution but it has some known issues too in a large network. On the hand, PCC provides 100% reliable load balancing and link redundancy solution but the configuration is a little bit complex. In my previous article I discussed how to easily configure ECMP Load Balancing and Link Redundancy network and in this article I will discuss how to configure PCC Load Balancing and Link Redundancy network with MikroTik Router over Dual Gateway. Core Devices and IP Information To configure a load balancing with failover network, I am using MikroTik RouterOS v6.38.1 that has two ISP connections and a LAN network. IP information that I am using for this network configuration are given below. ISP1 IP 192.168.30.2/30 and Gateway IP 192.168.30.1 ISP2 IP 192.168.60.2/30 and Gateway IP 192.168.60.1 LAN network: 10.10.70.0/24 and LAN Gateway IP 10.10.70.1/24 [...]
- »
MikroTik Dual WAN PCC Load Balancing with PPPoE Server | July 5, 2018
Hi geek, you are here because you are finding a complete MikroTik Dual WAN PCC Load balancing and Link Redundancy solution with PPPoE Server because you have managed two ISP connections and want to provide an uninterrupted internet connection to your clients. You also want to manage your LAN clients with PPPoE Server because it provides a hassle free network administration. MikroTik PCC provides 100% reliable Load Balancing and Link Redundancy network and in my previous article I discussed how [...]
- »
MikroTik PCC Load Balancing over Unequal Dual WAN Links | June 12, 2018
Hi, you are here means you are finding a Load Balancing and Link Redundancy solution with Unequal WAN links in your MikroTik Router. If so, it is your right place. In my previous article I discussed how to configure a Dual WAN Load Balancing and Link Redundancy network using PCC method but it was assumed that both WAN links have equal bandwidth. But in real situation, you may have unequal WAN links such as ISP1 may have 10MB bandwidth and [...]
- »
MikroTik Unequal Dual WAN Load Balancing with Failover using ECMP | September 15, 2019
MikroTik Router is capable of doing Load Balancing with Failover over multiple gateways. Policy Based Routing, ECMP, PCC and NTH Load Balancing are the popular load balancing methods in MikroTik Router. Among these methods, ECMP is so easy to configure and provides almost 100% load balancing and link redundancy solution. In my previous article, I discussed how to configure Load Balancing and Link Redundancy using ECMP over two equal bandwidth gateways. ECMP method is also capable of doing load balancing [...]
- »
MikroTik Load Balancing and Link Redundancy with PBR | March 31, 2019
In computer networking, the Load Balancing technique is used to send network traffic over multiple gateways. If you have multiple ISP connections available, you can use load balancing technique to establish a stable network. You may now ask, why will I use multiple ISP connections? What are the benefits to use multiple ISP connections in my network? For your satisfaction, the following points are some reasons to use load balancing technique in your network. No ISP can give you 100% [...]
- »
MikroTik Load Balancing over Multiple Gateways (2 WAN) | October 13, 2016
Load Balancing is a technique used to send network traffic over multiple gateways. If you have multiple ISP connections in your network, you can send your network traffic through those ISP connections and can make a load balancing network. Accidently you may ask me, why will I use multiple ISP connections? What are the benefits to use multiple ISP connections in my network? I will say, ask yourself deeply then you will find the reasons why multiple ISP connections is [...]
- »
HTTP vs. HTTPS: The Impact Of Using SSL Certificates | November 29, 2021
Google and cybersecurity experts continue to make clarion calls to web admins and website owners to switch from HTTP to HTTPS. But is there any difference between the two other than the extra “S” at the end of HTTPS? Not everyone understands the differences between HTTP and HTTPS and why the difference is so significant. In this post, we will discuss the differences between HTTP and HTTPS, the reasons why you need to switch from HTTP to HTTPS, and the [...]
- »
How to Block a Phone from WiFi Router | May 8, 2024
We usually buy a WiFi Router from market and configure SSID and password to access it. We also configure DHCP Server so that whenever a phone or IP device gets connected to this SSID with the password, the device can get an IP address automatically and can get internet access. It is not possible to secure the WiFi Network keeping only the password authentication method. Because the password can be shared by the users or can be hacked easily. So, [...]
- »
MikroTik PPPoE Setup with Radius Server Prepaid Billing System | December 23, 2017
MikroTik PPPoE Server is popularly used in ISP Companies to maintain user connection. Along with MikroTik PPPoE Service it is a better idea to make a prepaid billing system with Radius Server. MikroTik User Manager Radius Server is a user authentication and accounting application that gives the ISP Company ability to manage PPPoE user’s connection with proper bandwidth management as well as their prepaid billing system with scratch card. So, any ISP Company can turn a smart network system with [...]
- »
Troubleshooting Common Issues with Security Cameras in MikroTik Networks | February 7, 2025
30 Seconds Summary When fixing security cameras on MikroTik networks, you might see issues like bad video quality, connections dropping, motion detection not working, and security weaknesses. These problems can happen because of not enough internet speed, network congestion, IP conflicts, old software, or weak security. To fix these, make sure you have enough internet speed, set up the IP settings correctly, give camera traffic priority, and update the software regularly. Also, protect the cameras with strong passwords and encryption. [...]
More Similar Content
You May Also Like
