MikroTik Load Balancing

MikroTik Router is capable of doing load balancing over multiple gateways. Policy Based Routing, ECMP, PCC and Nth load balancing etc are the popular load balancing method in MikroTik Router.

Most Relevant Content

  • MikroTik Load Balancing with 2 PPPoE and 1 Static WAN using ECMP

    ECMP provides almost 100% reliable load balancing and link redundancy solution. ECMP is a per connection load balancing where connection is marked with source and destination IP pair. In my previous article I discussed how to configure DUAL WAN load balancing with failover using ECMP method where WAN connections were static IP Addresses. But some ISP companies use PPPoE service for their client connection. So, some network administrators become confused to configure load balancing with PPPoE WAN connection because PPPoE WAN connection is a little bit complex than static WAN connection. Some of my loyal readers also ask me to make a tutorial on Load Balancing with PPPoE Client. So, in this article I will discuss how to configure Load Balancing with Failover over two PPPoE WAN connections and one static WAN connection in MikroTik Router. Network Diagram We will configure Multi WAN load balancing using ECMP method according to the following network diagram. In this network, MikroTik Router’s ether1 port is connected to ISP1 with PPPoE WAN connection (username: wan1 and Password: wan1) and ether2 port is connected to ISP2 with PPPoE WAN connection (username: wan2 and Password: wan2) and ether3 port is connected ISP3 with IP block 172.25.25.0/30 [...]

    READ MORE »

  • »

    MikroTik Load Balancing over Multiple Gateways (2 WAN) |   October 13, 2016

    Load Balancing is a technique used to send network traffic over multiple gateways. If you have multiple ISP connections in your network, you can send your network traffic through those ISP connections and can make a load balancing network. Accidently you may ask me, why will I use multiple ISP connections? What are the benefits to use multiple ISP connections in my network? I will say, ask yourself deeply then you will find the reasons why multiple ISP connections is [...]

    READ MORE »

  • More Similar Content

  • »

    MikroTik Load Balancing and Link Redundancy with PBR |   March 31, 2019

    In computer networking, the Load Balancing technique is used to send network traffic over multiple gateways. If you have multiple ISP connections available, you can use load balancing technique to establish a stable network. You may now ask, why will I use multiple ISP connections? What are the benefits to use multiple ISP connections in my network? For your satisfaction, the following points are some reasons to use load balancing technique in your network. No ISP can give you 100% [...]

    READ MORE »

  • »

    MikroTik Load Balancing and Link Redundancy with ECMP |   October 28, 2016

    Load balancing and link redundancy is the main concern to any network administrator. Because, they always want to keep live their network 24/7. If you have multiple WAN connections, you can easily make a load balancing as well as link redundancy network with MikroTik Router. Different types of load balancing and link redundancy are present in MikroTik Router. ECMP Load Balancing is one of them. ECMP is so easy to implement and it provides an perfect load balancing solution. In this [...]

    READ MORE »

  • »

    MikroTik Hotspot Configuration with ECMP Load Balancing |   September 4, 2021

    MikroTik Hotspot is one of the most popular services in MikroTik RouterOS and day be day the demand of Hotspot service is increasing. MikroTik Hotspot can be used in any Airport, Hotel, Restaurant, Campus, Camp, Office or any ISP network. It is also possible to establish a WiFi Broadband Network with the MikroTik Hotspot service. How to configure MikroTik Hotspot was discussed in one of my previous articles. Although MikroTik Hotspot configuration is not so difficult but sometimes we face [...]

    READ MORE »

  • »

    MikroTik Unequal Dual WAN Load Balancing with Failover using ECMP |   September 15, 2019

    MikroTik Router is capable of doing Load Balancing with Failover over multiple gateways. Policy Based Routing, ECMP, PCC and NTH Load Balancing are the popular load balancing methods in MikroTik Router. Among these methods, ECMP is so easy to configure and provides almost 100% load balancing and link redundancy solution. In my previous article, I discussed how to configure Load Balancing and Link Redundancy using ECMP over two equal bandwidth gateways. ECMP method is also capable of doing load balancing [...]

    READ MORE »

  • »

    MikroTik Dual WAN PCC Load Balancing with PPPoE Server |   July 5, 2018

    Hi geek, you are here because you are finding a complete MikroTik Dual WAN PCC Load balancing and Link Redundancy solution with PPPoE Server because you have managed two ISP connections and want to provide an uninterrupted internet connection to your clients. You also want to manage your LAN clients with PPPoE Server because it provides a hassle free network administration. MikroTik PCC provides 100% reliable Load Balancing and Link Redundancy network and in my previous article I discussed how [...]

    READ MORE »

  • »

    MikroTik PCC Load Balancing over Unequal Dual WAN Links |   June 12, 2018

    Hi, you are here means you are finding a Load Balancing and Link Redundancy solution with Unequal WAN links in your MikroTik Router. If so, it is your right place. In my previous article I discussed how to configure a Dual WAN Load Balancing and Link Redundancy network using PCC method but it was assumed that both WAN links have equal bandwidth. But in real situation, you may have unequal WAN links such as ISP1 may have 10MB bandwidth and [...]

    READ MORE »

  • »

    MikroTik Dual WAN Load Balancing with Failover using PCC |   May 27, 2018

    Hi geek, going through this article means you are finding Load Balancing as well as Link Redundancy solution for your MikroTik network because you already have multiple WAN connections or you are planning to lease multiple WAN connections. MikroTik has various Load Balancing and Link Redundancy methods such as ECMP, PCC and so on. ECMP method provides an easy configurable load balancing with failover solution but it has some known issues too in a large network. On the hand, PCC [...]

    READ MORE »

  • »

    MikroTik Router First Time Startup and Setup using WebFig |   April 17, 2018

    I guess, you have purchased a new MikroTik Router or installed a new MikroTik RouterOS on PC and you are searching How to Start MikroTik Router First Time and How to Complete Basic RouterOS Configuration using WebFig (Web Interface) for running a basic network. If these are your concern, don’t worry, in this article I will show how to startup your MikroTik Router first time and complete RouterOS basic configuration using WebFig web interface so easily. There are three methods [...]

    READ MORE »