mikrotik pcc
Most Relevant Content
MikroTik Dual WAN Load Balancing with Failover using PCC
Hi geek, going through this article means you are finding Load Balancing as well as Link Redundancy solution for your MikroTik network because you already have multiple WAN connections or you are planning to lease multiple WAN connections. MikroTik has various Load Balancing and Link Redundancy methods such as ECMP, PCC and so on. ECMP method provides an easy configurable load balancing with failover solution but it has some known issues too in a large network. On the hand, PCC provides 100% reliable load balancing and link redundancy solution but the configuration is a little bit complex. In my previous article I discussed how to easily configure ECMP Load Balancing and Link Redundancy network and in this article I will discuss how to configure PCC Load Balancing and Link Redundancy network with MikroTik Router over Dual Gateway. Core Devices and IP Information To configure a load balancing with failover network, I am using MikroTik RouterOS v6.38.1 that has two ISP connections and a LAN network. IP information that I am using for this network configuration are given below. ISP1 IP 192.168.30.2/30 and Gateway IP 192.168.30.1 ISP2 IP 192.168.60.2/30 and Gateway IP 192.168.60.1 LAN network: 10.10.70.0/24 and LAN Gateway IP 10.10.70.1/24 [...]
- »
MikroTik PCC Load Balancing over Unequal Dual WAN Links | June 12, 2018
Hi, you are here means you are finding a Load Balancing and Link Redundancy solution with Unequal WAN links in your MikroTik Router. If so, it is your right place. In my previous article I discussed how to configure a Dual WAN Load Balancing and Link Redundancy network using PCC method but it was assumed that both WAN links have equal bandwidth. But in real situation, you may have unequal WAN links such as ISP1 may have 10MB bandwidth and [...]
- »
MikroTik Dual WAN PCC Load Balancing with PPPoE Server | July 5, 2018
Hi geek, you are here because you are finding a complete MikroTik Dual WAN PCC Load balancing and Link Redundancy solution with PPPoE Server because you have managed two ISP connections and want to provide an uninterrupted internet connection to your clients. You also want to manage your LAN clients with PPPoE Server because it provides a hassle free network administration. MikroTik PCC provides 100% reliable Load Balancing and Link Redundancy network and in my previous article I discussed how [...]
- »
MikroTik Unequal Dual WAN Load Balancing with Failover using ECMP | September 15, 2019
MikroTik Router is capable of doing Load Balancing with Failover over multiple gateways. Policy Based Routing, ECMP, PCC and NTH Load Balancing are the popular load balancing methods in MikroTik Router. Among these methods, ECMP is so easy to configure and provides almost 100% load balancing and link redundancy solution. In my previous article, I discussed how to configure Load Balancing and Link Redundancy using ECMP over two equal bandwidth gateways. ECMP method is also capable of doing load balancing [...]
- »
MikroTik Load Balancing and Link Redundancy with PBR | March 31, 2019
In computer networking, the Load Balancing technique is used to send network traffic over multiple gateways. If you have multiple ISP connections available, you can use load balancing technique to establish a stable network. You may now ask, why will I use multiple ISP connections? What are the benefits to use multiple ISP connections in my network? For your satisfaction, the following points are some reasons to use load balancing technique in your network. No ISP can give you 100% [...]
- »
MikroTik Load Balancing over Multiple Gateways (2 WAN) | October 13, 2016
Load Balancing is a technique used to send network traffic over multiple gateways. If you have multiple ISP connections in your network, you can send your network traffic through those ISP connections and can make a load balancing network. Accidently you may ask me, why will I use multiple ISP connections? What are the benefits to use multiple ISP connections in my network? I will say, ask yourself deeply then you will find the reasons why multiple ISP connections is [...]
- »
MikroTik VLAN and Bridge Configuration | September 19, 2017
VLAN and Bridge are two useful features in MikroTik Router. These two features are frequently used in any MikroTik network configuration. VLAN divides a physical interface into multiple logical interfaces. So, you can isolate your network into multiple logical networks on a physical interface. On other hand, MikroTik Bridge integrates multiple physical interfaces in a logical interface. So, you can extend your broadcast domain on multiple physical interfaces and can extend your popular services such as PPPoE or DHCP on [...]
- »
Computer Networking Basics | February 10, 2017
Computer networking is a buzzword to the present world. By the virtue of computer networking, the world has become just like a village. So, anyone of the world can communicate with any person of the world within seconds as if they are living in a village. Computer networking does not mean a single element. A lot of networking elements and protocol work behind a computer networking. So, the computer guys who are interested to learn how computer networking works should [...]
- »
MikroTik Hotspot Login by HTTP CHAP, HTTP PAP and HTTPS | July 25, 2020
MikroTik Hotspot uses various types of login methods. Among these login methods HTTP CHAP, HTTP PAP and HTTPS are basic and important login methods. So, a MikroTik system administrator should have proper understanding on Hotspot HTTP CHAP, HTTP PAP and HTTPS login methods. In my previous article I discussed how to configure MikroTik Hotspot using Winbox. In this article I will discuss how to use HTTP CHAP, HTTP PAP and HTTPS login methods properly in MikroTik Hotspot Server. MikroTik Hotspot [...]
- »
Enable F8 Menu to Enter Safe Mode in Windows 8 & 10 | August 27, 2015
Windows is the most popular operating system in the world. No computer user can go a single day without windows operating system. As windows is a popular operating system, it has a lot of viruses also. But windows provides various tools for removing these viruses. For removing any unwanted program, windows safe mode is a best option. A popular way to open windows safe mode is windows Advanced Boot Options. Advanced Boot Options provides different run levels for windows users so [...]
More Similar Content
You May Also Like
