MikroTik router MAC binding
Most Relevant Content
MikroTik Router Static DHCP Server Configuration
DHCP Server assigns IP address and other related IP information (Subnet mask, Gateway and DNS) automatically to network devices. But automatic DHCP Server has some disadvantages too. If any IP device connects to any automatic DHCP network, the device will get an IP address and related IP information automatically by the DHCP Server and the device will start to use resources of this network. In this situation, the network administrator cannot know who is being connected to the network and using network resources such internet bandwidth, network printer and server. This unauthorized access is obviously a security issue of any network. But network administrator can prevent this unauthorized access to his network by applying static DHCP Server strategy in MikroTik Router. Static DHCP Server Strategy A network administrator can prevent unauthorized DHCP client access to his network by applying static DHCP Server strategy in MikroTik Router. Static DHCP server strategy is also known as MAC address binding with DHCP server. In a static DHCP network, the user of any IP device must provide MAC address to the network administrator to get IP address and related IP information such as Subnet mask, Gateway and DNS. Any IP device will not get [...]
- »
How to Bind Hotspot User to MAC and Static IP in MikroTik | November 6, 2020
MikroTik Hotspot is usually a user based Hotspot access controlling system. Internet access and bandwidth can easily be maintained with Hotspot user based system. But sometimes we may require more control on Hotspot system which is not possible only username based system. So, we may need to bind hotspot user to MAC and static IP address. If we can bind hotspot user to static IP address, it is easy to control Hotspot users with MikroTik Router and Firewall. So, in [...]
- »
MikroTik HotSpot One to One NAT/Universal HotSpot NAT | September 27, 2020
MikroTik Hotspot is an awesome service that can be customized widely. When MikroTik Hotspot is enabled on an interface, it adds dynamic destination NAT rules which will redirect all HTTP and HTTPS requests from unauthorized users to the Hotspot authentication proxy. So, no user can get internet access in Hotspot network without authentication. MikroTik Hotspot also uses one to one NAT providing an IP address from selected IP Pool and this IP address handles user’s data and limitation. Sometimes we [...]
- »
MikroTik PPPoE Server with Radius User Authentication | December 17, 2017
MikroTik PPPoE Server is popularly used in ISP Companies. Almost all Local ISP Companies use PPPoE service to manage their client’s connection. So, PPPoE Server Configuration places an important role in MikroTik RouterOS. MikroTik PPPoE Server configuration with local user database has been discussed in my previous article that is enough to manage PPPoE users for a single RouterOS. But if you have more than one RouterOS in your network or you need to manage your users remotely and more [...]
- »
MikroTik Hotspot Customization | April 5, 2017
Hotspot is one of the most popular services in MikroTik router. MikroTik Hotspot Gateway is a policy to authorize network clients before to access local network resources as well as public network resources through MikroTik router. In a Hotspot network, the user can login or authenticate using almost any web browser, so there is no need to install any additional software to client end. As Hotspot login prompt is a webpage, Hotspot service can effectively be used as an advertising medium of [...]
- »
Restrict Internet Access Based on MAC Address in MikroTik | February 4, 2017
MikroTik router has a lot of features by which a network administrator can design his network as he likes. As a network administrator, sometimes you may need to allow internet access some specific devices. If other devices try to access internet, they will be rejected by your router. For example, say, you have configured a simple network like below diagram. In this network, you have configured WAN, LAN, Gateway, DNS and NAT. Also you have created queue rules for limiting [...]
- »
LVM Management in CentOS/Red Hat 7 Linux | March 15, 2019
LVM (Logical Volume Manager) is the recommended partition method for CentOS/Red Hat 7 Linux. Specially, if we work on Mail Server, File Server, FTP Server, Web Proxy Server or any application where disk space changes frequently, the LVM partition is mandatory in this case. In my previous article, I discussed how to install CentOS 7.5 with LVM partitioning. If you are new here or CentOS 7 is not yet installed, I will suggest you to follow my previous article and [...]
- »
MikroTik SSTP VPN Server Configuration with Windows 10 | April 27, 2020
VPN (Virtual Private Network) technology provides a secure and encrypted tunnel across a public network. So, a private network user can send and receive data to any remote private network through VPN tunnel as if his/her network device was directly connected to that private network. Secure Socket Tunneling Protocol (SSTP) transports PPP tunnel over TLS channel. SSTP uses TLS channel over TCP port 443. So, SSTP VPN can virtually pass through all firewalls and proxy servers. Because of using TLS [...]
- »
MikroTik Blocking All Websites Except a Few Websites | May 7, 2019
A few days ago, someone asked me how to block all websites except one with MikroTik Firewall. For this, I have decided to discuss about blocking all websites except someone’s whitelist. Unlike firewall devices, MikroTik Firewall by default allows all websites. So, if you need to block any website, you have to create a firewall rule that will block the specific website. Now if we want to block all websites and want to allow a few websites, we have to [...]
- »
MikroTik Hotspot HTTPS Redirect with Free SSL Certificate | June 21, 2020
SSL Certificate is required to enable HTTPS Login and HTTPS Redirect in MikroTik Hotspot. In one of my last articles I discussed how to configure MikroTik Hotspot HTTPS redirect and HTTPS login with MikroTik self-signed certificate. But self-signed certificate is not trusted by operating system. So, we get the following two issues if we configure HTTPS Login and HTTPS Redirect with self-signed certificate. Ask to proceed unsafe site: As browsers cannot trust self-signed certificate, it shows a warning message and [...]
More Similar Content
You May Also Like
