mikrotik site to site pptp setup
Most Relevant Content
MikroTik VPN Configuration with Site-to-Site PPTP
VPN (Virtual Private Network) is a technology that provides a secure and encrypted tunnel across a public network and using this VPN tunnel a private network user can send and receive data to any remote private network as if his/her network device was directly connected to that private network. MikroTik PPTP is a popular client-server VPN service that provides a secure and encrypted link across public network. MikroTik PPTP can be applied in two methods. Connecting remote workstation/client: In this method, a PPTP client supported operating system such as Windows can communicate with MikroTik PPTP server through PPTP tunnel whenever required and can access remote private network as if it was directly connected to the remote private network. Site-to-Site PPTP: This method is also known as VPN between routers. In this method, a PPTP client supported router always establishes a PPTP tunnel with MikroTik PPTP Server. So, private networks of these routers can communicate to each other as if they were directly connected to the same router. MikroTik PPTP Server configuration for connecting remote workstation has been explained in my previous article. So, in this article I will only show how to configure a Site-to-Site PPTP Tunnel between two MikroTik [...]
- »
WireGuard VPN Setup in MikroTik RouterOS7 with Windows OS | August 14, 2022
VPN (Virtual Private Network) is one of the most popular services in MikroTik RouterOS. A lot of VPN services (IPsec, EoIP, OpenVPN, PPTP, L2TP, IPIP etc.) are available in MikroTik RouterOS but in RouterOS7, a new VPN service named WireGuard has been introduced which is extremely simple yet first, secure and modern VPN. WireGuard uses cryptography to make it secure. In RouterOS7, WireGuard can be used either Client-Server (Road Warrior) VPN tunnel or site to site VPN tunnel. Using Client-Server [...]
- »
MikroTik L2TP/IPsec VPN Configuration (Connecting Remote Client) | February 26, 2018
VPN (Virtual Private Network) is a technology that provides a secure and encrypted tunnel across a public network and using this VPN tunnel a private network user can send and receive data to any remote private network as if his/her network device was directly connected to that private network. MikroTik L2TP server is one of the most popular VPN services. It provides a secure and encrypted tunnel across public network for transporting IP traffic using PPP. L2TP/IPsec is more secure [...]
- »
MikroTik VPN Configuration with PPTP (Connecting Remote Client) | August 17, 2016
VPN (Virtual Private Network) is a technology that extends private network across a public network. It enables private network users to send and receive data across public network as if their network devices were directly connected to the private network. There are many VPN services in MikroTik RouterOS 7. Among them, MikroTik PPTP is a mostly used VPN service. It is a client-server VPN technology. So, a user can access server, printer, IP phone and any other network devices of [...]
- »
Static Routing Configuration in MikroTik Router | February 11, 2018
Static Routing is an important topic to any network administrator who works with multiple MikroTik RouterOS and wants to establish communication among Router’s local networks. For example, say a network administrator maintains two MikroTik RouterOS connected with any communication medium and each RouterOS has its own networks and network resources such as servers, printers etc. and he wants that each network and network resources will be accessible from other networks. In this case, static routing configuration between two RouterOS will [...]
- »
CentOS 8 Networking Configuration Using Cockpit Web Console | January 11, 2021
The first task after completing CentOS 8 fresh installation is to configure its networking so that it can be accessed from other network devices. In my previous article, I discussed how to install CentOS 8 Graphical User Interface (GNOME Desktop) with step by step screenshots. If you are a new CentOS 8 user and have not yet installed CentOS 8 on your server machine, feel free to follow that article and install CentOS 8 GNOME Desktop according to the article. [...]
- »
MikroTik DNS Client and Caching DNS Server Configuration | April 7, 2019
Domain Name Server (DNS) is an essential part in a computer network. Today web communication cannot imagine without DNS. DNS is a client server protocol where DNS Client requests for the domain name resolution and DNS Server response on it. MikroTik Router has both DNS Client and DNS Server features. The DNS Client is used to resolve domain name to IP address from a DNS Server. On the other hand, the DNS Server feature provides domain name resolution for the [...]
- »
Ubuntu Server Set Static IP Address with Netplan | July 1, 2021
Ubuntu Server is one of the most popular open source sever operating systems. Ubuntu Server can be used in production without any hassle. In my previous article, I discussed how to install Ubuntu Server’s latest version (Ubuntu Server 20.04) with LVM. In this article, we are going to see how to assign static IP address in Ubuntu Server with Netplan network management tool. Netplan Since Ubuntu Server 17.10, Netplan is being used as the default network management tool instead of [...]
- »
MikroTik Hotspot Login by MAC Cookie Configuration | July 10, 2020
MAC Cookie is a newly introduced Hotspot feature in MikroTik Router. MAC Cookie is specially designed to improve accessibility for smartphones, laptop and other mobile devices. MAC Cookie is not a basic login method rather it is an extension of basic Hotspot login method such as HTTP CHAP, HTTP PAP and HTTPS. So, when MAC Cookie is used with these basic Hotspot login methods, it improves the Hotspot user accessibility. In my previous article, I discussed MikroTik Hotspot basic configuration [...]
- »
MikroTik Router First Time Startup and Setup using WebFig | April 17, 2018
I guess, you have purchased a new MikroTik Router or installed a new MikroTik RouterOS on PC and you are searching How to Start MikroTik Router First Time and How to Complete Basic RouterOS Configuration using WebFig (Web Interface) for running a basic network. If these are your concern, don’t worry, in this article I will show how to startup your MikroTik Router first time and complete RouterOS basic configuration using WebFig web interface so easily. There are three methods [...]
More Similar Content
You May Also Like
