mikrotik site to site pptp setup

Most Relevant Content

  • MikroTik VPN Configuration with Site-to-Site PPTP

    VPN (Virtual Private Network) is a technology that provides a secure and encrypted tunnel across a public network and using this VPN tunnel a private network user can send and receive data to any remote private network as if his/her network device was directly connected to that private network. MikroTik PPTP is a popular client-server VPN service that provides a secure and encrypted link across public network. MikroTik PPTP can be applied in two methods. Connecting remote workstation/client: In this method, a PPTP client supported operating system such as Windows can communicate with MikroTik PPTP server through PPTP tunnel whenever required and can access remote private network as if it was directly connected to the remote private network. Site-to-Site PPTP: This method is also known as VPN between routers. In this method, a PPTP client supported router always establishes a PPTP tunnel with MikroTik PPTP Server. So, private networks of these routers can communicate to each other as if they were directly connected to the same router. MikroTik PPTP Server configuration for connecting remote workstation has been explained in my previous article. So, in this article I will only show how to configure a Site-to-Site PPTP Tunnel between two MikroTik [...]

    READ MORE »

  • More Similar Content

  • »

    WireGuard VPN Setup in MikroTik RouterOS7 with Windows OS |   August 14, 2022

    VPN (Virtual Private Network) is one of the most popular services in MikroTik RouterOS. A lot of VPN services (IPsec, EoIP, OpenVPN, PPTP, L2TP, IPIP etc.) are available in MikroTik RouterOS but in RouterOS7, a new VPN service named WireGuard has been introduced which is extremely simple yet first, secure and modern VPN. WireGuard uses cryptography to make it secure. In RouterOS7, WireGuard can be used either Client-Server (Road Warrior) VPN tunnel or site to site VPN tunnel. Using Client-Server [...]

    READ MORE »

  • »

    MikroTik L2TP/IPsec VPN Configuration (Connecting Remote Client) |   February 26, 2018

    VPN (Virtual Private Network) is a technology that provides a secure and encrypted tunnel across a public network and using this VPN tunnel a private network user can send and receive data to any remote private network as if his/her network device was directly connected to that private network. MikroTik L2TP server is one of the most popular VPN services. It provides a secure and encrypted tunnel across public network for transporting IP traffic using PPP. L2TP/IPsec is more secure [...]

    READ MORE »

  • »

    MikroTik VPN Configuration with PPTP (Connecting Remote Client) |   August 17, 2016

    VPN (Virtual Private Network) is a technology that extends private network across a public network. It enables private network users to send and receive data across public network as if their network devices were directly connected to the private network. There are many VPN services in MikroTik RouterOS 7. Among them, MikroTik PPTP is a mostly used VPN service. It is a client-server VPN technology. So, a user can access server, printer, IP phone and any other network devices of [...]

    READ MORE »

  • You May Also Like

  • »

    MikroTik Hotspot with Data Limit and Prepaid Billing System |   January 19, 2018

    If you are a network administrator and want to establish a network that will have data limitation package with prepaid billing system, MikroTik Hotspot Server with MikroTik User Manager Radius Server will be your best solution. Because, MikroTik User Manager is a poplar Radius application that will give facility to manage user data package as well as prepaid billing system efficiently. On the other hand, MikroTik Hotspot is a popular service that will help to connect your network user without [...]

    READ MORE »

  • »

    User Management in Linux (Red Hat/CentOS) |   September 28, 2017

    User management is an important part of Linux (especially Red Hat Enterprise Linux) system administration. Linux users can be administrated using user or group administration GUI (Graphical User Interface) tool as well as through Red Hat/CentOS Linux command prompt. But I will always suggest you to do command line user administration as much as possible because in production GUI will not be provided always. Many people who are learning Linux administration do not know all features of user administration command [...]

    READ MORE »

  • »

    MikroTik VLAN Routing Configuration with Manageable Switch |   July 11, 2018

    A VLAN (Virtual LAN) is a group of computers, servers, network printers and other network devices that behave as if they were connected to a single network. VLAN is a logical topology that divides a single broadcast domain into multiple broadcast domains. VLAN is a layer 2 method. So, a manageable switch is required to manage VLAN in your network and a router is required to route and control your inter-VLAN. VLAN increases network security and performance as well as [...]

    READ MORE »

  • »

    Internet Connection Sharing Ethernet to Ethernet |   September 22, 2015

    Windows is the most popular operating system to any computer user. It is said that no computer user cannot go a single a day without windows operating system. Windows has a lot of default internet features which help to connect our computer to internet as well as it provides internet connection sharing facility. With Internet Connection Sharing (ICS) feature, you can turn your laptop into Wi-Fi hotspot or turn your desktop into a router to share your broadband connection with your family [...]

    READ MORE »

  • »

    MikroTik Router Static DHCP Server Configuration |   October 25, 2015

    DHCP Server assigns IP address and other related IP information (Subnet mask, Gateway and DNS) automatically to network devices. But automatic DHCP Server has some disadvantages too. If any IP device connects to any automatic DHCP network, the device will get an IP address and related IP information automatically by the DHCP Server and the device will start to use resources of this network. In this situation, the network administrator cannot know who is being connected to the network and [...]

    READ MORE »

  • »

    MikroTik Send Browsing Log to Remote Syslog Server |   August 18, 2019

    MikroTik RouterOS is capable of logging various system events as well as user browsing information. Logs can be saved in router’s memory (RAM), disk, file, sent by email or even sent to remote syslog server. Sometimes it may require saving user browsing log by the law. So, a syslog server is an essential part to any network. In this article, I will discuss how to configure MikroTik Router to keep user browsing log and send that log to remote syslog [...]

    READ MORE »