mikrotik vlan routing configuration
Most Relevant Content
VLAN Routing Configuration between MikroTik RouterOS
VLAN (Virtual Local Area Network) is a logical topology that divides a single broadcast domain into multiple broadcast domains. It increases network security and performance as well as improves network efficiency. MikroTik VLAN routing configuration with manageable switch was discussed in previous article. Today we will learn how to configure VLAN between MikroTik RouterOS. This Router to router VLAN (layer3 VLAN) is useful when any ISP provide connection to one or more local ISPs who use MikroTik Router to maintain their LAN users. Network Diagram To configure VLAN between MikroTik RouterOS, I am following a network diagram like the below image. In this network, ether1 port of Core RouterOS is connected to internet having IP address 192.168.30.2/29. Ether2 port is connected to an Ethernet Hub. A hub is an OSI physical layer device. So, if there is a hub between Routers, then from Layer3 point of view it is the same as an Ethernet cable connection between them. Ether2 has two VLANs (VLAN 10 having IP address 172.22.2.1/30 and VLAN 20 having IP address 172.22.2.5/30). Ether1 port of Client RouterOS1 is connected to the Ethernet Hub. This port has a VLAN interface whose id is 10. So, it is able [...]
- »
MikroTik VLAN Routing Configuration with Manageable Switch | July 11, 2018
A VLAN (Virtual LAN) is a group of computers, servers, network printers and other network devices that behave as if they were connected to a single network. VLAN is a logical topology that divides a single broadcast domain into multiple broadcast domains. VLAN is a layer 2 method. So, a manageable switch is required to manage VLAN in your network and a router is required to route and control your inter-VLAN. VLAN increases network security and performance as well as [...]
- »
MikroTik VLAN and Bridge Configuration | September 19, 2017
VLAN and Bridge are two useful features in MikroTik Router. These two features are frequently used in any MikroTik network configuration. VLAN divides a physical interface into multiple logical interfaces. So, you can isolate your network into multiple logical networks on a physical interface. On other hand, MikroTik Bridge integrates multiple physical interfaces in a logical interface. So, you can extend your broadcast domain on multiple physical interfaces and can extend your popular services such as PPPoE or DHCP on [...]
- »
ISP Bandwidth Management with MikroTik PCQ | June 25, 2016
MikroTik is an excellent router for managing ISP Bandwidth. For this, most of the ISPs are now using MikroTik Router for managing client bandwidth. The service used to manage bandwidth in MikroTik RouterOS is QUEUE. There are various types of queue services in MikroTik Router for managing internet bandwidth. Among these, PCQ can specially be used for maintaining ISP bandwidth. In this article, we will see how to manage ISP Bandwidth with MikroTik PCQ. MikroTik PCQ Service PCQ stands for [...]
- »
How to Assign Static IP Address in Windows OS | September 16, 2015
Communication between one computer to another computer or server is established with IP addresses. Without IP address no communication is possible in computer network. An Internet Protocol (IP) Address is a numerical value or label assigned to each electronic device (e.g., computer, smartphone and printer) which uses Internet Protocol for communication. IP can be assigned both dynamically and statically on a IP devices. Dynamic IP is assigned by a DHCP server. If a DHCP server is present in a network, [...]
- »
Single IP NAT Strategy in MikroTik RouterOS 7 | September 29, 2015
MikroTik Router has a lot of features which help to customize network as our requirement. Sometimes, it may be our requirement that we need to allow internet access on per IP. Normally, when we apply masquerade NAT rule in our MikroTik Router, all private IPs will be masqueraded or a network block will be masqueraded. If we do normal masqurade and enable a DHCP Server in our network, we may face a lot of unauthorized access in our network. Because [...]
- »
Ubuntu Server Set Static IP Address with Netplan | July 1, 2021
Ubuntu Server is one of the most popular open source sever operating systems. Ubuntu Server can be used in production without any hassle. In my previous article, I discussed how to install Ubuntu Server’s latest version (Ubuntu Server 20.04) with LVM. In this article, we are going to see how to assign static IP address in Ubuntu Server with Netplan network management tool. Netplan Since Ubuntu Server 17.10, Netplan is being used as the default network management tool instead of [...]
- »
MikroTik Hotspot Setup with Radius Server (User Manager) | January 6, 2018
Hotspot is one of the most popular services in MikroTik Router. It is popularly used in Hotel and Restaurant, Railway Station or Airport, School or University Campus and so on. Even ISP network and office network also use MikroTik Hotspot for authenticating network clients/users. Hotspot user can be managed with Hotspot’s local user database or with a Radius Server. Radius Server gives facility to manage Hotspot user’s bandwidth and accounting easily and centrally. So, Hotspot setup with Radius Server can [...]
- »
How to Mount USB Device in CentOS 7 (NTFS and Linux FS) | February 18, 2019
USB Hard Disk Drive or USB Flash Drive (Pen drive) is a popular external device that can be used to backup data or transfer data from one device to other device. In GUI (Graphical User Interface) Operating System such as Window or GNOME Desktop in Linux can automatically mount USB device and can show data in it if the File System of that device is supported. But all users do not like or always do not have GUI mode of [...]
- »
MikroTik Blocking Websites with TLS Host Firewall Matcher | April 29, 2019
Most of the websites now use https and blocking https websites is so much harder with the MikroTik RouterOS version less than 6.41. But from RouterOS v6.41, MikroTik Firewall introduces a new property named TLS Host that is capable to match https websites so easily. So, blocking https websites like Facebook, YouTube etc. can be easily done with MikroTik Router if RouterOS version is greater than 6.41. In my previous article, I discussed how to block websites with MikroTik Router [...]
More Similar Content
You May Also Like
