mikrotik vlan setup between routeros
Most Relevant Content
VLAN Routing Configuration between MikroTik RouterOS
VLAN (Virtual Local Area Network) is a logical topology that divides a single broadcast domain into multiple broadcast domains. It increases network security and performance as well as improves network efficiency. MikroTik VLAN routing configuration with manageable switch was discussed in previous article. Today we will learn how to configure VLAN between MikroTik RouterOS. This Router to router VLAN (layer3 VLAN) is useful when any ISP provide connection to one or more local ISPs who use MikroTik Router to maintain their LAN users. Network Diagram To configure VLAN between MikroTik RouterOS, I am following a network diagram like the below image. In this network, ether1 port of Core RouterOS is connected to internet having IP address 192.168.30.2/29. Ether2 port is connected to an Ethernet Hub. A hub is an OSI physical layer device. So, if there is a hub between Routers, then from Layer3 point of view it is the same as an Ethernet cable connection between them. Ether2 has two VLANs (VLAN 10 having IP address 172.22.2.1/30 and VLAN 20 having IP address 172.22.2.5/30). Ether1 port of Client RouterOS1 is connected to the Ethernet Hub. This port has a VLAN interface whose id is 10. So, it is able [...]
- »
MikroTik RouterOS Device Mode: Home, Basic, and Advanced – and Their Impact on Hotspot Setup | November 4, 2025
MikroTik RouterOS offers flexible configuration options for everything from home routers to ISP-grade hotspots. When setting up your MikroTik device, you’ll see a Device Mode option in Quick Set — allowing you to choose between Home, Basic, or Advanced modes. These modes define how much control you have over the router’s features and directly affect your ability to create and manage a Hotspot network. In this guide, we’ll explain each mode, show you how to check and change device mode [...]
- »
MikroTik VLAN Routing Configuration with Manageable Switch | July 11, 2018
A VLAN (Virtual LAN) is a group of computers, servers, network printers and other network devices that behave as if they were connected to a single network. VLAN is a logical topology that divides a single broadcast domain into multiple broadcast domains. VLAN is a layer 2 method. So, a manageable switch is required to manage VLAN in your network and a router is required to route and control your inter-VLAN. VLAN increases network security and performance as well as [...]
- »
MikroTik Hotspot Login Page with Random MAC Detection | October 5, 2025
Hotspot businesses such as cafés, restaurants, co-working spaces, schools, and ISPs often rely on MikroTik Hotspot solutions to provide Wi-Fi access. One common challenge is that many modern devices (Android, iOS, Windows, macOS) use randomized (private) MAC addresses, which can cause repeated logins, loss of session persistence, and difficulties with usage tracking. To solve this problem, we have designed a professional Hotspot Login Page Template that not only looks modern and mobile-friendly but also detects randomized MAC addresses and notifies [...]
- »
phpMyAdmin with NGINX – Installation and Configuration | October 14, 2024
In modern web development, server management is a vital part. Two popular tools that assist in this process are Nginx and phpMyAdmin. Nginx is a high-performance web server, while phpMyAdmin is a widely-used web-based interface for managing MySQL or MariaDB databases. When combined, these tools provide a strong platform for serving dynamic web applications and managing their databases efficiently. What is Nginx? NGINX (pronounced “engine-x”) is an open-source web server that also functions as a reverse proxy, load balancer, and [...]
- »
MikroTik VLAN and Bridge Configuration | September 19, 2017
VLAN and Bridge are two useful features in MikroTik Router. These two features are frequently used in any MikroTik network configuration. VLAN divides a physical interface into multiple logical interfaces. So, you can isolate your network into multiple logical networks on a physical interface. On other hand, MikroTik Bridge integrates multiple physical interfaces in a logical interface. So, you can extend your broadcast domain on multiple physical interfaces and can extend your popular services such as PPPoE or DHCP on [...]
- »
FreeRADIUS MySQL Database GUI with phpMyAdmin on CentOS 7 | January 30, 2019
FreeRADIUS is a high performance RADIUS Server that accepts a large number of networking devices as RADIUS Client including MikroTik Router. MySQL is one of the best user sources for freeRADIUS server. In my previous article, I discussed how to install freeRADIUS server on CentOS 7 and how to integrate MySQL module with freeRADIUS server. I also discussed how to create user group and profile in MySQL database server and authenticate MikroTik PPPoE client with MySQL database user. I used [...]
- »
How to Block MAC Address in MikroTik RouterOS 7 | July 11, 2024
MikroTik RouterOS 7 by default allows any MAC address to get internet connection through it. But we may need to block some MAC addresses sometimes. There are three methods to block MAC address in MikroTik RouterOS 7 – Blocking MAC Address using Bridge Filter Rule. Blocking MAC Address using Firewall Filter Rule and Blocking MAC Address from DHCP Lease. We can use any of these methods if we want to block MAC Address in MikroTik Router. In this article, we [...]
- »
CentOS 8 Installation with Screenshots (Server with GUI) | November 21, 2020
Linux is a free and open source operating system developed by Linus Torvalds on September 17, 1991. It is mainly used as server environment. A lot of Linux distributions are present today. Among them, Red Hat Linux is used as enterprise Linux. Red Hat is also known as Red Hat commercial Linux that means Red Hat is a paid service program. CentOS (Community Enterprise Operating System) is another Linux distribution that provides a free and open source, enterprise-class, community-supported server platform functionally compatible with [...]
- »
MikroTik Hotspot HTTPS Redirect with Free SSL Certificate | June 21, 2020
SSL Certificate is required to enable HTTPS Login and HTTPS Redirect in MikroTik Hotspot. In one of my last articles I discussed how to configure MikroTik Hotspot HTTPS redirect and HTTPS login with MikroTik self-signed certificate. But self-signed certificate is not trusted by operating system. So, we get the following two issues if we configure HTTPS Login and HTTPS Redirect with self-signed certificate. Ask to proceed unsafe site: As browsers cannot trust self-signed certificate, it shows a warning message and [...]
More Similar Content
You May Also Like
