mikrotik vlan setup with manage switch
Most Relevant Content
MikroTik VLAN Routing Configuration with Manageable Switch
A VLAN (Virtual LAN) is a group of computers, servers, network printers and other network devices that behave as if they were connected to a single network. VLAN is a logical topology that divides a single broadcast domain into multiple broadcast domains. VLAN is a layer 2 method. So, a manageable switch is required to manage VLAN in your network and a router is required to route and control your inter-VLAN. VLAN increases network security and performance as well as improves IT efficiency. So, it will be a better plan to implement VLAN in your network. If you have or manage MikroTik Router and manageable switch, VLAN implementation in your network is not so difficult. In this article, I will show how to easily configure inter-VLAN routing with MikroTik Router and manageable switch. Core Devices and IP Information To configure a VLAN network and inter-VLAN routing, I am using a MikroTik RouterBoard 1100 AHX2 (RouterOS v6.38.1) and Level One (GEP-2450) manageable switch. IP information that I am using for VLAN network configuration are given below. WAN IP 192.168.30.2/30 and Gateway IP 192.168.30.1 LAN networks: 10.10.20.0/24, 10.10.30.0/24 and 10.10.40.0/24 DNS IP: 8.8.8.8 and 8.8.4.4 This IP information is just for my R&D purpose. [...]
- »
MikroTik RouterOS Device Mode: Home, Basic, and Advanced – and Their Impact on Hotspot Setup | November 4, 2025
MikroTik RouterOS offers flexible configuration options for everything from home routers to ISP-grade hotspots. When setting up your MikroTik device, you’ll see a Device Mode option in Quick Set — allowing you to choose between Home, Basic, or Advanced modes. These modes define how much control you have over the router’s features and directly affect your ability to create and manage a Hotspot network. In this guide, we’ll explain each mode, show you how to check and change device mode [...]
- »
Troubleshooting Common Issues with Security Cameras in MikroTik Networks | February 7, 2025
30 Seconds Summary When fixing security cameras on MikroTik networks, you might see issues like bad video quality, connections dropping, motion detection not working, and security weaknesses. These problems can happen because of not enough internet speed, network congestion, IP conflicts, old software, or weak security. To fix these, make sure you have enough internet speed, set up the IP settings correctly, give camera traffic priority, and update the software regularly. Also, protect the cameras with strong passwords and encryption. [...]
- »
How to Prevent Simultaneous User Login in MikroTik Hotspot | November 10, 2020
MikroTik Hotspot is a user based internet access system. Most of the user authentication and authorization can be controlled with MikroTik Hotspot. But sometimes some users misuse user based authentication system. Misusing simultaneous login is one of them. Usually we provide one username and password for a user and we expect he/she will use this username and password from only one device at a time. But it is also possible to use same username and password in multiple devices at [...]
- »
MikroTik RADIUS Server Setup with User Manager – RouterOS7 | August 4, 2022
MikroTik User Manager RADIUS Server is an awesome service for user Authentication, Authorization and Accounting (AAA) for a small or medium business. User Manager RADIUS Server can be used to maintain Hotspot, PPP, DHCP, IPsec, Wireless and System User authentication. In RouterOS 7, User Manager has come with new features and looking, specially, maintaining from Winbox. As User Mange package does not come with the default system package in RouterOS 7, we have to install User Manger package manually before [...]
- »
MikroTik Unequal Dual WAN Load Balancing with Failover using ECMP | September 15, 2019
MikroTik Router is capable of doing Load Balancing with Failover over multiple gateways. Policy Based Routing, ECMP, PCC and NTH Load Balancing are the popular load balancing methods in MikroTik Router. Among these methods, ECMP is so easy to configure and provides almost 100% load balancing and link redundancy solution. In my previous article, I discussed how to configure Load Balancing and Link Redundancy using ECMP over two equal bandwidth gateways. ECMP method is also capable of doing load balancing [...]
- »
Reset Mozilla Firefox to Default Settings | August 26, 2015
Mozilla Firefox is a free and open source web browser developed Mozilla Corporation. Mozilla Firefox is available for most of the popular operating system like Windows, macOS and Linux operating system. It is also a default web browser in Linux operating system. Mozilla Firefox is a popular web browser to any online user. It is said that no online user can go a single day without this Browser. I am also a fan of Mozilla Firefox browser and using this [...]
- »
Ubuntu Web Server Configuration with phpMyAdmin (LAMP Stack) | July 12, 2021
Ubuntu Server is one of the most popular open source operating systems that can be used in production without any hassle. In my previous article, I discussed how to install Ubuntu Server with LVM partition. I also discussed how to assign static IP address on Ubuntu Server interface with Netplan network management tool. Ubuntu web server is a popular service because web developers usually use Ubuntu Server for their development project. Besides development project, Ubuntu web server can also be [...]
- »
What Are the 7 Layers of OSI Model and How Do They Work | October 5, 2021
The OSI Model stands for Open Systems Interconnection Model, a conceptualized framework used to describe the seven layers of a telecommunication system or network. It was established as an international standard in the year 1984 by the International Organization for Standardization. This model helps visualize how networks operate and is still used today to figure out and solve network problems, such as by a web development company. In this article, we will talk about the 7 layers of the OSI [...]
- »
CentOS 7.5 Installation with GUI and LVM Partition | March 7, 2019
Red Hat/CentOS Linux is a popular server operating system. Specially who work on mail server, web server, web proxy server, ftp server and file server are so familiar with the Red Hat/CentOS Linux. In my previous article, I discussed how to install CentOS 7.5 Linux step by step with the standard partition. But if you want to work on mail server, web proxy server, ftp server, file server or any other application where disk space changes frequently, the standard partitioning [...]
More Similar Content
You May Also Like
