mikrotik vlan trunk example
Most Relevant Content
MikroTik VLAN Routing Configuration with Manageable Switch
A VLAN (Virtual LAN) is a group of computers, servers, network printers and other network devices that behave as if they were connected to a single network. VLAN is a logical topology that divides a single broadcast domain into multiple broadcast domains. VLAN is a layer 2 method. So, a manageable switch is required to manage VLAN in your network and a router is required to route and control your inter-VLAN. VLAN increases network security and performance as well as improves IT efficiency. So, it will be a better plan to implement VLAN in your network. If you have or manage MikroTik Router and manageable switch, VLAN implementation in your network is not so difficult. In this article, I will show how to easily configure inter-VLAN routing with MikroTik Router and manageable switch. Core Devices and IP Information To configure a VLAN network and inter-VLAN routing, I am using a MikroTik RouterBoard 1100 AHX2 (RouterOS v6.38.1) and Level One (GEP-2450) manageable switch. IP information that I am using for VLAN network configuration are given below. WAN IP 192.168.30.2/30 and Gateway IP 192.168.30.1 LAN networks: 10.10.20.0/24, 10.10.30.0/24 and 10.10.40.0/24 DNS IP: 8.8.8.8 and 8.8.4.4 This IP information is just for my R&D purpose. [...]
- »
MikroTik Site to Site EoIP Tunnel with IPsec | March 21, 2018
VPN (Virtual Private Network) is a technology that provides a secure tunnel across a public network. A private network user can send and receive data to any remote private network using VPN Tunnel as if his/her network device was directly connected to that private network. MikroTik provides EoIP (Ethernet over IP) tunnel that is used to create a site to site VPN. EoIP tunneling is a MikroTik RouterOS protocol that creates an Ethernet tunnel between two MikroTik Routers on top [...]
- »
Guest WiFi – How to Setup on MikroTik AP | April 30, 2024
Guest WiFi helps to keep your network safe and secure. Any sensitive wireless network should have a guest network. So, Guest WiFi is so essential for an office network. In a corporate office, guests or visitors frequently come and get connected to get internet for a few times. It is so much security issue to keep guest or visitor in the core network because among them someone can damage important network resources. So, to keep them isolated from the core [...]
- »
MikroTik Configuration with DHCP WAN Connection | March 24, 2019
MikroTik Router is one of the most popular routers because of having a lot of networking features. MikroTik DHCP Client is a special feature that is used to connect to any DHCP Server. So, if any uplink ISP provides DHCP connection, MikroTik Router is able to connect that DHCP Server using this DHCP Client. In my previous article, I discussed how to configure MikroTik Router with PPPoE WAN Connection. In this article, I will discuss how to configure MikroTik Router [...]
- »
WiFi Station Setup in MikroTik Wireless Router | November 27, 2019
MikroTik Wireless Router is capable of working as a WiFi Client. So, if any ISP provides WiFi connection for their clients, MikroTik Wireless Router can be used to connect to that ISP SSID by configuring wireless station mode. MikroTik WiFi station mode finds available SSID and connects with permitted SSID. This wireless connection can be used as wireless WAN connection and configuring LAN, multiple devices can get internet over this wireless WAN connection. In my previous article, I discussed how [...]
- »
MikroTik VRRP Configuration with DHCP Server | October 22, 2018
MikroTik VRRP (Virtual Router Redundancy Protocol) ensures high available internet network. If any organization requires uninterrupted internet connection, MikroTik VRRP implementation will be a vital solution for them. MikroTik VRRP creates a virtual router accumulating two or more physical routers and ensures uninterrupted internet connection keeping activate one physical router always. That means, if any physical router fails to operate due to any hardware failure, MikroTik VRRP uses another backup router for internet gateway until the running router comes back [...]
- »
Single IP NAT Strategy in MikroTik RouterOS 7 | September 29, 2015
MikroTik Router has a lot of features which help to customize network as our requirement. Sometimes, it may be our requirement that we need to allow internet access on per IP. Normally, when we apply masquerade NAT rule in our MikroTik Router, all private IPs will be masqueraded or a network block will be masqueraded. If we do normal masqurade and enable a DHCP Server in our network, we may face a lot of unauthorized access in our network. Because [...]
- »
MikroTik User Manager RADIUS Installation on RouterOS 7 | July 5, 2022
The User Manager is a MikroTik provided RADIUS Server packages. It can be used to manage users for small or medium level business. User Manger is not a default RouterOS packages. So, we have to install user manager as an extra package in RouterOS 7. RouterOS 7 has brought a massive change on User Manager package. The most important change is managing User Manager from Winbox while in RouterOS 6 the User Manager package can only be managed from Web [...]
- »
MikroTik RouterOS User Authentication via RADIUS Server | November 19, 2017
MikroTik RouterOS has a strong local user database that is enough to manage a single MikroTik RouterOS user. But if your network has more than one MikroTik Routers, it is always better to use a RADIUS server to manage RouterOS user centrally. MikroTik User Manager RADIUS Server is a centralized user authentication and accounting application that gives the ISP Company or network administrator ability to manage not only RouterOS users but also PPP, Hotspot, DHCP and Wireless users. How to [...]
- »
MikroTik Router Web Proxy Configuration | August 28, 2016
A Proxy Server is usually placed between users and the internet so that the proxy server can track the activities of any user. Formerly, a proxy server was mainly used for caching the static content of any web server because the internet speed was too slow. So, users would get high speed for browsing as if they were browsing a local server. But nowadays the internet bandwidth has increased. So, the proxy server is usually not used for web caching [...]
You May Also Like
