mikrotik vlan with manage switch
Most Relevant Content
MikroTik VLAN Routing Configuration with Manageable Switch
A VLAN (Virtual LAN) is a group of computers, servers, network printers and other network devices that behave as if they were connected to a single network. VLAN is a logical topology that divides a single broadcast domain into multiple broadcast domains. VLAN is a layer 2 method. So, a manageable switch is required to manage VLAN in your network and a router is required to route and control your inter-VLAN. VLAN increases network security and performance as well as improves IT efficiency. So, it will be a better plan to implement VLAN in your network. If you have or manage MikroTik Router and manageable switch, VLAN implementation in your network is not so difficult. In this article, I will show how to easily configure inter-VLAN routing with MikroTik Router and manageable switch. Core Devices and IP Information To configure a VLAN network and inter-VLAN routing, I am using a MikroTik RouterBoard 1100 AHX2 (RouterOS v6.38.1) and Level One (GEP-2450) manageable switch. IP information that I am using for VLAN network configuration are given below. WAN IP 192.168.30.2/30 and Gateway IP 192.168.30.1 LAN networks: 10.10.20.0/24, 10.10.30.0/24 and 10.10.40.0/24 DNS IP: 8.8.8.8 and 8.8.4.4 This IP information is just for my R&D purpose. [...]
- »
MikroTik RouterOS Device Mode: Home, Basic, and Advanced – and Their Impact on Hotspot Setup | November 4, 2025
MikroTik RouterOS offers flexible configuration options for everything from home routers to ISP-grade hotspots. When setting up your MikroTik device, you’ll see a Device Mode option in Quick Set — allowing you to choose between Home, Basic, or Advanced modes. These modes define how much control you have over the router’s features and directly affect your ability to create and manage a Hotspot network. In this guide, we’ll explain each mode, show you how to check and change device mode [...]
- »
Troubleshooting Common Issues with Security Cameras in MikroTik Networks | February 7, 2025
30 Seconds Summary When fixing security cameras on MikroTik networks, you might see issues like bad video quality, connections dropping, motion detection not working, and security weaknesses. These problems can happen because of not enough internet speed, network congestion, IP conflicts, old software, or weak security. To fix these, make sure you have enough internet speed, set up the IP settings correctly, give camera traffic priority, and update the software regularly. Also, protect the cameras with strong passwords and encryption. [...]
- »
VLAN Routing Configuration between MikroTik RouterOS | September 27, 2018
VLAN (Virtual Local Area Network) is a logical topology that divides a single broadcast domain into multiple broadcast domains. It increases network security and performance as well as improves network efficiency. MikroTik VLAN routing configuration with manageable switch was discussed in previous article. Today we will learn how to configure VLAN between MikroTik RouterOS. This Router to router VLAN (layer3 VLAN) is useful when any ISP provide connection to one or more local ISPs who use MikroTik Router to maintain [...]
- »
MikroTik VLAN and Bridge Configuration | September 19, 2017
VLAN and Bridge are two useful features in MikroTik Router. These two features are frequently used in any MikroTik network configuration. VLAN divides a physical interface into multiple logical interfaces. So, you can isolate your network into multiple logical networks on a physical interface. On other hand, MikroTik Bridge integrates multiple physical interfaces in a logical interface. So, you can extend your broadcast domain on multiple physical interfaces and can extend your popular services such as PPPoE or DHCP on [...]
- »
MikroTik Send Browsing Log to Remote Syslog Server | August 18, 2019
MikroTik RouterOS is capable of logging various system events as well as user browsing information. Logs can be saved in router’s memory (RAM), disk, file, sent by email or even sent to remote syslog server. Sometimes it may require saving user browsing log by the law. So, a syslog server is an essential part to any network. In this article, I will discuss how to configure MikroTik Router to keep user browsing log and send that log to remote syslog [...]
- »
CentOS 7.5 Installation with GUI and LVM Partition | March 7, 2019
Red Hat/CentOS Linux is a popular server operating system. Specially who work on mail server, web server, web proxy server, ftp server and file server are so familiar with the Red Hat/CentOS Linux. In my previous article, I discussed how to install CentOS 7.5 Linux step by step with the standard partition. But if you want to work on mail server, web proxy server, ftp server, file server or any other application where disk space changes frequently, the standard partitioning [...]
- »
MikroTik Port Forwarding using Winbox | July 23, 2018
MikroTik Port Forwarding or Port Mapping is a NAT application that is used to redirect a request from MikroTik IP address and port number combination to a local IP address and port number. For example, if you have a Web Server or FTP Server in your private/local area and want to access this local server from outside of your local area (from internet/public), you can apply MikroTik port forwarding or port mapping and can easily access your Web Server or [...]
- »
MikroTik Radius Configuration with FreeRADIUS and MySQL | December 18, 2018
FreeRADIUS is a modular RADIUS suite. A lot of modules such as Perl, python, MySQL etc. can be integrated with freeRADIUS to enrich freeRADIUS features. MySQL is one of the best user and client sources in freeRADIUS server. One of the important advantages of MySQL with freeRADIUS server is that MySQL can easily be controlled with a lot of programming languages including PHP. So, freeRADIUS users and their authentication, authorization and accounting can easily be controlled graphically using MySQL database [...]
- »
MikroTik Hotspot Setup with Radius Server (User Manager) | January 6, 2018
Hotspot is one of the most popular services in MikroTik Router. It is popularly used in Hotel and Restaurant, Railway Station or Airport, School or University Campus and so on. Even ISP network and office network also use MikroTik Hotspot for authenticating network clients/users. Hotspot user can be managed with Hotspot’s local user database or with a Radius Server. Radius Server gives facility to manage Hotspot user’s bandwidth and accounting easily and centrally. So, Hotspot setup with Radius Server can [...]
More Similar Content
You May Also Like
