mount ntfs linux
Most Relevant Content
How to Mount USB Device in CentOS 7 (NTFS and Linux FS)
USB Hard Disk Drive or USB Flash Drive (Pen drive) is a popular external device that can be used to backup data or transfer data from one device to other device. In GUI (Graphical User Interface) Operating System such as Window or GNOME Desktop in Linux can automatically mount USB device and can show data in it if the File System of that device is supported. But all users do not like or always do not have GUI mode of Operating System specially the CentOS or Red Hat Linux user. In this case, USB device must be mounted manually and then access data from it. On the other hand, by default Linux (CentOS or Red Hat) does not support NTFS File System. But most of the USB devices are usually formatted with NTFS which is a Windows supported file system. To read or write data from NTFS formatted disk in CentOS or Red Hat Linux, a third party application named NTFS-3G have to be used. How to create or delete disk partition with fidisk utility was discussed in my previous article. In this article, I will discuss how to format USB devices and how to mount USB devices in CentOS [...]
- »
CentOS 7 Partition Management with fdisk Utility | February 11, 2019
CentOS or Red Hat Linux is a popular server operating system to the system administrators. Almost all the system admins or IT guys who play with mail server, file server, proxy server and so on are so known with CentOS or Red Hat Linux and cannot go a single day without this operating system. The guys who are also wish to be a system admin should be familiar with CentOS or Red Hat operating system. In my previous article, I [...]
- »
How to Bind Hotspot User to MAC and Static IP in MikroTik | November 6, 2020
MikroTik Hotspot is usually a user based Hotspot access controlling system. Internet access and bandwidth can easily be maintained with Hotspot user based system. But sometimes we may require more control on Hotspot system which is not possible only username based system. So, we may need to bind hotspot user to MAC and static IP address. If we can bind hotspot user to static IP address, it is easy to control Hotspot users with MikroTik Router and Firewall. So, in [...]
- »
MikroTik HotSpot One to One NAT/Universal HotSpot NAT | September 27, 2020
MikroTik Hotspot is an awesome service that can be customized widely. When MikroTik Hotspot is enabled on an interface, it adds dynamic destination NAT rules which will redirect all HTTP and HTTPS requests from unauthorized users to the Hotspot authentication proxy. So, no user can get internet access in Hotspot network without authentication. MikroTik Hotspot also uses one to one NAT providing an IP address from selected IP Pool and this IP address handles user’s data and limitation. Sometimes we [...]
- »
What Are the 7 Layers of OSI Model and How Do They Work | October 5, 2021
The OSI Model stands for Open Systems Interconnection Model, a conceptualized framework used to describe the seven layers of a telecommunication system or network. It was established as an international standard in the year 1984 by the International Organization for Standardization. This model helps visualize how networks operate and is still used today to figure out and solve network problems, such as by a web development company. In this article, we will talk about the 7 layers of the OSI [...]
- »
How to Install VMware ESXi VMvisor on VMware Workstation | December 28, 2020
There is no doubt that VMware vSphere is the pioneer in virtualization world. Day by day IT infrastructure is converting to virtualization where VMware vSphere is providing more features than any other virtualization software. VMware ESXi is the foundation of VMware vSphere. VMware ESXi is a bare metal hypervisor. So, a physical server is required to install VMware ESXi. Physical servers are usually costly and beginners or researchers cannot always arrange such a high priced physical server to install ESXi [...]
- »
MikroTik RouterOS 7 Quick Setup using Winbox 4 | October 6, 2024
MikroTik RouterBoard and MikroTik Wireless Router are popularly used now a days. MikroTik RouterBoard is used in ISP Network and MikroTik Wireless Router is specially used for home users. MikroTik RouterBoard requires custom configuration because it is used for large network. On the other hand, MikroTik Wireless Router is used in home for a small network. MikroTik Wireless Router requires quick setup because home users are so hurry and not so technical. So, MikroTik RouterOS 7 provides a quick setup [...]
- »
Download YouTube Video with Firefox Add-ons | August 26, 2015
YouTube is the most popular video sharing website. Statistics shows that YouTube is the second popular website of the world. So, it is nothing to say that you are a YouTube fan like me. As a YouTube fan, sometimes you may need to download YouTube videos which you like. Although, you often get an extra bandwidth for YouTube video streaming from your ISP now a days so that you can watch your favorite YouTube video without any buffering. But it [...]
- »
MikroTik Load Balancing and Link Redundancy with ECMP | October 28, 2016
Load balancing and link redundancy is the main concern to any network administrator. Because, they always want to keep live their network 24/7. If you have multiple WAN connections, you can easily make a load balancing as well as link redundancy network with MikroTik Router. Different types of load balancing and link redundancy are present in MikroTik Router. ECMP Load Balancing is one of them. ECMP is so easy to implement and it provides an perfect load balancing solution. In this [...]
- »
How to Add New Domains to BIND DNS Server | July 5, 2019
DNS (Domain Name System) Server is an essential part to any computer network. So, it is always suggest keeping a DNS Server in every network. How to configure a DNS Server with BIND package was discussed in my previous article. A common question among the fresher admins of BIND DNS is how to add a new domain to BIND DNS Server. For this, this article is designed to discuss the proper way to add multiple domains to BIND DNS Server. [...]
More Similar Content
You May Also Like
