pppoe user authentication via radius server
Most Relevant Content
MikroTik PPPoE Server with Radius User Authentication
MikroTik PPPoE Server is popularly used in ISP Companies. Almost all Local ISP Companies use PPPoE service to manage their client’s connection. So, PPPoE Server Configuration places an important role in MikroTik RouterOS. MikroTik PPPoE Server configuration with local user database has been discussed in my previous article that is enough to manage PPPoE users for a single RouterOS. But if you have more than one RouterOS in your network or you need to manage your users remotely and more efficiently and easily, it is better to use a Radius Server to manage PPPoE users centrally. MikroTik User Manager Radius Server is a centralized user authentication and accounting application that gives the ISP Company or network administrator ability to manage not only PPPoE users but also Hotspot, DHCP, RouterOS and Wireless users. How to setup MikroTik User Manager Radius Server has been discussed in my previous article. If you are a new MikroTik user, feel free to study that article and install User Manager Radius Server according to that article and then keep reading this article. In this article, I will show how to configure MikroTik PPPoE Server with Radius user authentication. MikroTik User Manager Radius Server Package can be [...]
- »
MikroTik User Manager Installation and Basic Configuration | December 15, 2019
MikroTik User Manager is a RADIUS application developed by MikroTik team and can be used without charge. User Manager is used for authentication, authorization and accounting of MikroTik RouterOS, PPPoE, Hotspot, DHCP and Wireless users. Although User Manager Package is developed by MikroTik it will not be found in RouterOS by default. So, we have to install User Manager Package manually if we wish to use this RADIUS application. User Manager can be installed on MikroTik RouterBOARD, MikroTik CHR or [...]
- »
MikroTik Router First Time Startup and Setup using WebFig | April 17, 2018
I guess, you have purchased a new MikroTik Router or installed a new MikroTik RouterOS on PC and you are searching How to Start MikroTik Router First Time and How to Complete Basic RouterOS Configuration using WebFig (Web Interface) for running a basic network. If these are your concern, don’t worry, in this article I will show how to startup your MikroTik Router first time and complete RouterOS basic configuration using WebFig web interface so easily. There are three methods [...]
- »
MikroTik HotSpot One to One NAT/Universal HotSpot NAT | September 27, 2020
MikroTik Hotspot is an awesome service that can be customized widely. When MikroTik Hotspot is enabled on an interface, it adds dynamic destination NAT rules which will redirect all HTTP and HTTPS requests from unauthorized users to the Hotspot authentication proxy. So, no user can get internet access in Hotspot network without authentication. MikroTik Hotspot also uses one to one NAT providing an IP address from selected IP Pool and this IP address handles user’s data and limitation. Sometimes we [...]
- »
MikroTik WiFi Frequency Band and Channel Width Explanation | January 10, 2020
MikroTik WiFi frequency, band and channel width tuning is an important task in any wireless network. If we fail to setup WiFi frequency and channel width parameter properly, we will notice a poor performance of wireless network. WiFi is aimed at use within unlicensed spectrum and the unlicensed spectrum that is usually used for WiFi is 2.4 GHz and 5 GHz band. 2.4 GHz and 5 GHz bands have multiple channels and these channels must be setup properly to get [...]
- »
MikroTik Load Balancing with 2 PPPoE and 1 Static WAN using ECMP | September 24, 2019
ECMP provides almost 100% reliable load balancing and link redundancy solution. ECMP is a per connection load balancing where connection is marked with source and destination IP pair. In my previous article I discussed how to configure DUAL WAN load balancing with failover using ECMP method where WAN connections were static IP Addresses. But some ISP companies use PPPoE service for their client connection. So, some network administrators become confused to configure load balancing with PPPoE WAN connection because PPPoE [...]
- »
MikroTik WiFi MAC Authentication with UserMan RADIUS Server | December 23, 2019
MikroTik Wireless Router is popularly used as WiFi AP. MikroTik WiFi AP has a lot of features to tune WiFi network as your requirements. MAC authentication is one the amazing and useful features in MikroTik WiFi. MAC authentication enables filtering MAC address that means no MAC can be able to connect to WiFi AP without authentication. MAC authentication can be done either local database or RADIUS Server. MAC authentication with RADIUS Server provides facility to manage multiple APs from centralized [...]
- »
Internet Connection Sharing Ethernet to Ethernet | September 22, 2015
Windows is the most popular operating system to any computer user. It is said that no computer user cannot go a single a day without windows operating system. Windows has a lot of default internet features which help to connect our computer to internet as well as it provides internet connection sharing facility. With Internet Connection Sharing (ICS) feature, you can turn your laptop into Wi-Fi hotspot or turn your desktop into a router to share your broadband connection with your family [...]
- »
phpMyAdmin with NGINX – Installation and Configuration | October 14, 2024
In modern web development, server management is a vital part. Two popular tools that assist in this process are Nginx and phpMyAdmin. Nginx is a high-performance web server, while phpMyAdmin is a widely-used web-based interface for managing MySQL or MariaDB databases. When combined, these tools provide a strong platform for serving dynamic web applications and managing their databases efficiently. What is Nginx? NGINX (pronounced “engine-x”) is an open-source web server that also functions as a reverse proxy, load balancer, and [...]
- »
HTTP vs. HTTPS: The Impact Of Using SSL Certificates | November 29, 2021
Google and cybersecurity experts continue to make clarion calls to web admins and website owners to switch from HTTP to HTTPS. But is there any difference between the two other than the extra “S” at the end of HTTPS? Not everyone understands the differences between HTTP and HTTPS and why the difference is so significant. In this post, we will discuss the differences between HTTP and HTTPS, the reasons why you need to switch from HTTP to HTTPS, and the [...]
More Similar Content
You May Also Like
