simple load balancing with failover mikrotik
Most Relevant Content
MikroTik Load Balancing and Link Redundancy with PBR
In computer networking, the Load Balancing technique is used to send network traffic over multiple gateways. If you have multiple ISP connections available, you can use load balancing technique to establish a stable network. You may now ask, why will I use multiple ISP connections? What are the benefits to use multiple ISP connections in my network? For your satisfaction, the following points are some reasons to use load balancing technique in your network. No ISP can give you 100% uptime guarantee. So, it will be better to use more than one ISP connection to ensure 100% uptime network. Sometimes you may have dependency (such as Mail, IPPBX etc.) on your uplink ISP but their service is not so good. In this case, you can use another ISP which provides better service. Your current ISP is better but high paid bandwidth. In this case, you can purchase another ISP bandwidth which is cheap but their connection is good, not better. If these are your current status, it is suggested to configure a load balancing and link redundancy network with multiple gateways. MikroTik Router has various load balancing and link redundancy methods (such as ECMP method, PCC method and PBR method) [...]
- »
MikroTik Load Balancing and Link Redundancy with ECMP | October 28, 2016
Load balancing and link redundancy is the main concern to any network administrator. Because, they always want to keep live their network 24/7. If you have multiple WAN connections, you can easily make a load balancing as well as link redundancy network with MikroTik Router. Different types of load balancing and link redundancy are present in MikroTik Router. ECMP Load Balancing is one of them. ECMP is so easy to implement and it provides an perfect load balancing solution. In this [...]
- »
MikroTik Load Balancing over Multiple Gateways (2 WAN) | October 13, 2016
Load Balancing is a technique used to send network traffic over multiple gateways. If you have multiple ISP connections in your network, you can send your network traffic through those ISP connections and can make a load balancing network. Accidently you may ask me, why will I use multiple ISP connections? What are the benefits to use multiple ISP connections in my network? I will say, ask yourself deeply then you will find the reasons why multiple ISP connections is [...]
- »
MikroTik User Manager Installation and Basic Configuration | December 15, 2019
MikroTik User Manager is a RADIUS application developed by MikroTik team and can be used without charge. User Manager is used for authentication, authorization and accounting of MikroTik RouterOS, PPPoE, Hotspot, DHCP and Wireless users. Although User Manager Package is developed by MikroTik it will not be found in RouterOS by default. So, we have to install User Manager Package manually if we wish to use this RADIUS application. User Manager can be installed on MikroTik RouterBOARD, MikroTik CHR or [...]
- »
MikroTik EoIP Tunnel for Bridging LANs over the Internet | April 22, 2018
VPN (Virtual Private Network) is a technology that provides a secure tunnel across a public network. A private network user can send and receive data to any remote private network using VPN Tunnel as if his/her network device was directly connected to that private network. MikroTik provides EoIP (Ethernet over IP) that is used to create a site to site VPN tunnel. EoIP tunneling is a MikroTik RouterOS protocol that creates an Ethernet tunnel between two MikroTik Routers on top [...]
- »
How to Recover MikroTik User Password | August 9, 2018
MikroTik Wiki and Forum say that there is no way to recover MikroTik user password without losing MikroTik configuration. But if you have an unencrypted configuration file backup taken before, you will be able to recover your user password using MikroTik password recovery tools. How to Backup and Restore MikroTik configuration file manually was discussed in my previous article. I also discussed how to backup MikroTik configuration file automatically via Mail in another article and in this article I will [...]
- »
How to Bind Hotspot User to MAC and Static IP in MikroTik | November 6, 2020
MikroTik Hotspot is usually a user based Hotspot access controlling system. Internet access and bandwidth can easily be maintained with Hotspot user based system. But sometimes we may require more control on Hotspot system which is not possible only username based system. So, we may need to bind hotspot user to MAC and static IP address. If we can bind hotspot user to static IP address, it is easy to control Hotspot users with MikroTik Router and Firewall. So, in [...]
- »
MikroTik User Management (RouterOS User) | October 22, 2017
MikroTik User Management plays an important role in MikroTik system administration as well as MikroTik security. Don’t be confused the title User Management with the MikroTik UserManager. UserManager is an optional and totally separate package distributed by MikroTik. UserManager is an implementation of Radius server that is used to maintain not only RouterOS users but also PPPoE, PPTP, Hotspot, Wireless and DHCP users. In my few future articles, I will discuss how to maintain these users with MikroTik UserManager Radius [...]
- »
MikroTik VRRP Configuration with DHCP Server | October 22, 2018
MikroTik VRRP (Virtual Router Redundancy Protocol) ensures high available internet network. If any organization requires uninterrupted internet connection, MikroTik VRRP implementation will be a vital solution for them. MikroTik VRRP creates a virtual router accumulating two or more physical routers and ensures uninterrupted internet connection keeping activate one physical router always. That means, if any physical router fails to operate due to any hardware failure, MikroTik VRRP uses another backup router for internet gateway until the running router comes back [...]
- »
CentOS 7.5 Installation with GUI and LVM Partition | March 7, 2019
Red Hat/CentOS Linux is a popular server operating system. Specially who work on mail server, web server, web proxy server, ftp server and file server are so familiar with the Red Hat/CentOS Linux. In my previous article, I discussed how to install CentOS 7.5 Linux step by step with the standard partition. But if you want to work on mail server, web proxy server, ftp server, file server or any other application where disk space changes frequently, the standard partitioning [...]
More Similar Content
You May Also Like
