vlan routing among mikrotik routeros

Most Relevant Content

  • VLAN Routing Configuration between MikroTik RouterOS

    VLAN (Virtual Local Area Network) is a logical topology that divides a single broadcast domain into multiple broadcast domains. It increases network security and performance as well as improves network efficiency. MikroTik VLAN routing configuration with manageable switch was discussed in previous article. Today we will learn how to configure VLAN between MikroTik RouterOS. This Router to router VLAN (layer3 VLAN) is useful when any ISP provide connection to one or more local ISPs who use MikroTik Router to maintain their LAN users. Network Diagram To configure VLAN between MikroTik RouterOS, I am following a network diagram like the below image. In this network, ether1 port of Core RouterOS is connected to internet having IP address 192.168.30.2/29. Ether2 port is connected to an Ethernet Hub. A hub is an OSI physical layer device. So, if there is a hub between Routers, then from Layer3 point of view it is the same as an Ethernet cable connection between them. Ether2 has two VLANs (VLAN 10 having IP address 172.22.2.1/30 and VLAN 20 having IP address 172.22.2.5/30). Ether1 port of Client RouterOS1 is connected to the Ethernet Hub. This port has a VLAN interface whose id is 10. So, it is able [...]

    READ MORE »

  • More Similar Content

  • »

    MikroTik VLAN Routing Configuration with Manageable Switch |   July 11, 2018

    A VLAN (Virtual LAN) is a group of computers, servers, network printers and other network devices that behave as if they were connected to a single network. VLAN is a logical topology that divides a single broadcast domain into multiple broadcast domains. VLAN is a layer 2 method. So, a manageable switch is required to manage VLAN in your network and a router is required to route and control your inter-VLAN. VLAN increases network security and performance as well as [...]

    READ MORE »

  • You May Also Like

  • »

    MikroTik RouterOS Device Mode: Home, Basic, and Advanced – and Their Impact on Hotspot Setup |   November 4, 2025

    MikroTik RouterOS offers flexible configuration options for everything from home routers to ISP-grade hotspots. When setting up your MikroTik device, you’ll see a Device Mode option in Quick Set — allowing you to choose between Home, Basic, or Advanced modes. These modes define how much control you have over the router’s features and directly affect your ability to create and manage a Hotspot network. In this guide, we’ll explain each mode, show you how to check and change device mode [...]

    READ MORE »

  • »

    How to Import SSL Certificate in MikroTik RouterOS |   January 16, 2022

    SSL/TLS Certificate is used to make secure communication between server and clients. MikroTik RouterOS has a lot of services such OVPN, SSTP VPN, HTTPS, Hotspot and so on those use SSL/TLS certificate. It is possible to create self-signed certificate in MikroTik RouterOS but self-signed certificate faces untrusted CA warning. So, it is always better to use trusted CA either freemium or premium.  In my previous article, I discussed how to get a free SSL/TLS certificate from Zero SSL but Zero [...]

    READ MORE »

  • »

    Ubuntu Server 20.04 Installation with LVM |   May 28, 2021

    Linux is a free and open source operating system developed by Linus Torvalds on September 17, 1991. It is mainly used as server environment. A lot of Linux distributions are present today. Among them, Ubuntu is one of the best stable Linux distributions. Ubuntu has both Desktop and Server distribution. Ubuntu Server is a high performance and stable enterprise Linux distribution and it can be easily used in production. Ubuntu Server has both community-support and well documentation. So, IT guys can use Ubuntu [...]

    READ MORE »

  • »

    Red Hat/CentOS Network Configuration |   August 4, 2017

    Red Hat/CentOS network configuration or IP configuration is an important task to a Linux system administrator. After completing RedHat 7/ CentOS 7 fresh installation, you have to first configure your system network so that it can communicate to other network devices. In my previous article, I discussed how to install CentOS 7 core packages successfully on your physical machine. If you are a new CentOS 7 user and yet you have not installed CentOS on your machine, feel free to study [...]

    READ MORE »

  • »

    MikroTik Load Balancing with 2 PPPoE and 1 Static WAN using ECMP |   September 24, 2019

    ECMP provides almost 100% reliable load balancing and link redundancy solution. ECMP is a per connection load balancing where connection is marked with source and destination IP pair. In my previous article I discussed how to configure DUAL WAN load balancing with failover using ECMP method where WAN connections were static IP Addresses. But some ISP companies use PPPoE service for their client connection. So, some network administrators become confused to configure load balancing with PPPoE WAN connection because PPPoE [...]

    READ MORE »

  • »

    MikroTik RADIUS Server (User Manager) Installation |   October 28, 2017

    RADIUS Server is a centralized user authentication, authorization and accounting application. RADIUS authentication gives the ISP or network administrator ability to manage PPP users, login users and Hotspot users from one server throughout a large network. MikroTik RouterOS has a RADIUS client that is able to authenticate login users, Hotspot users and PPP users through a RADIUS server. MikroTik team also developed a totally separate RADIUS server package named User Manager that can be used to authenticate MikroTik users smoothly. [...]

    READ MORE »

  • »

    GNS3 Installation and Configuration Step by Step in Windows |   September 14, 2018

    GNS3 (Graphical Network Simulator) is one of the most popular network simulator software used by hundreds of thousands of network engineers worldwide to emulate, configure, test and troubleshoot virtual and real networks. GNS3 supports a large number of vendors such as MikroTik, Cisco, Juniper, Windows, Linux and many other vendors. GNS3 can be installed on Windows, Linux and MAC Operating System. In this article, I will show how to download and install GNS3 application in Windows Operating System. I will [...]

    READ MORE »

  • »

    MikroTik Router Integration and Configuration on GNS3 |   September 19, 2018

    GNS3 is a network simulator software used by hundreds of thousands of network engineers worldwide to emulate, configure, test and troubleshoot virtual and real networks. GNS3 can talk a large number of network vendors including MikroTik. MikroTik introduces Cloud Hosted Router (a RouterOS version) that is used to run as virtual machine and a virtual machine can easily be integrated with GNS3. So, network administrators who are fond of MikroTik Router can now configure, test and troubleshoot their MikroTik network [...]

    READ MORE »