wifi range extender
Most Relevant Content
How to Use Old Router as Range Extender to Boost WiFi Signal
WiFi is a technology to turn wired internet into WiFi internet and used in every home and office. Wireless internet gives you the freedom to use the internet without sitting in a single place. It is also true that speed performance drop in Wi-fi due to weak signal or interference. Sometimes laying a physical wired connection in every room is not possible. So Wi-Fi range extender setup helps you to boost signal strength. Instead of buying a new range extender device use old wifi router as range extender mode to boost Wifi signal. The easy method to boost Wi-fi signal coverage without using a range extender device is make wifi router as repeater mode which will extend signal. This post will help you turn old router as a range extender mode to improve wireless signals in the low signal areas. Setup WiFi Router as Range extender Mode To use the router as repeater mode need to access the settings page. To access the router login page use default IP Address router or Make factory reset if forget IP address. Connect Router LAN port to Desktop or Laptop LAN port. Use Static IP Address of the same series in LAN settings [...]
- »
How to Buy a Good WiFi Router for Home or Office | October 12, 2021
You are here because you want to buy a WiFi Router and want to know how to buy a good WiFi Router for your home or office or business. A lot of wireless routers are nowadays available in the market. But before buying a WiFi Router, you should know which one is a good WiFi Router for your need based on some features and specifications of the router. We will now see some key points those should have well understand [...]
- »
MikroTik User Manager Installation and Basic Configuration | December 15, 2019
MikroTik User Manager is a RADIUS application developed by MikroTik team and can be used without charge. User Manager is used for authentication, authorization and accounting of MikroTik RouterOS, PPPoE, Hotspot, DHCP and Wireless users. Although User Manager Package is developed by MikroTik it will not be found in RouterOS by default. So, we have to install User Manager Package manually if we wish to use this RADIUS application. User Manager can be installed on MikroTik RouterBOARD, MikroTik CHR or [...]
- »
CentOS 7.5 Installation with GUI and LVM Partition | March 7, 2019
Red Hat/CentOS Linux is a popular server operating system. Specially who work on mail server, web server, web proxy server, ftp server and file server are so familiar with the Red Hat/CentOS Linux. In my previous article, I discussed how to install CentOS 7.5 Linux step by step with the standard partition. But if you want to work on mail server, web proxy server, ftp server, file server or any other application where disk space changes frequently, the standard partitioning [...]
- »
MikroTik WiFi Frequency Band and Channel Width Explanation | January 10, 2020
MikroTik WiFi frequency, band and channel width tuning is an important task in any wireless network. If we fail to setup WiFi frequency and channel width parameter properly, we will notice a poor performance of wireless network. WiFi is aimed at use within unlicensed spectrum and the unlicensed spectrum that is usually used for WiFi is 2.4 GHz and 5 GHz band. 2.4 GHz and 5 GHz bands have multiple channels and these channels must be setup properly to get [...]
- »
MikroTik WebProxy Log Analyzer Configuration | August 30, 2016
MikroTik RouterOS generally logs various system events and status information. Logs are mainly saved in router’s memory (RAM) or disk. MikroTik logs can also be sent by email or even can be sent to a remote syslog server. All logs those are saved in router’s local memory can be viewed from Log menu. Any log entry that is saved in local memory contains time and date when event occurred, topics that this message belongs to and message itself. But local [...]
- »
MikroTik Load Balancing with 2 PPPoE and 1 Static WAN using ECMP | September 24, 2019
ECMP provides almost 100% reliable load balancing and link redundancy solution. ECMP is a per connection load balancing where connection is marked with source and destination IP pair. In my previous article I discussed how to configure DUAL WAN load balancing with failover using ECMP method where WAN connections were static IP Addresses. But some ISP companies use PPPoE service for their client connection. So, some network administrators become confused to configure load balancing with PPPoE WAN connection because PPPoE [...]
- »
Turn Computer into Wi-Fi Hotspot | September 17, 2015
Internet Connection Sharing is an awesome feature in windows operating system. Using this feature, you can turn your computer which has wireless network card integrated into Wi-Fi hotspot and share your internet connection with your friends or family members. Generally, each laptop has a wireless network card integrated by default. So, if you are a laptop user, you can turn your laptop into Wi-Fi hotspot so easily. If you are a Desktop user, you can also turn your desktop as [...]
- »
MikroTik Site to Site VPN Configuration with IPsec | March 8, 2018
VPN (Virtual Private Network) is a technology that provides a secure and encrypted tunnel across a public network. A private network user can send and receive data to any remote private network using this VPN Tunnel as if his/her network device was directly connected to that private network. Site to Site VPN technique establishes a secure tunnel between two routers across public network and local networks of these routers can send and receive data through this VPN tunnel. MikroTik RouterOS [...]
- »
MikroTik VPN Configuration with PPTP (Connecting Remote Client) | August 17, 2016
VPN (Virtual Private Network) is a technology that extends private network across a public network. It enables private network users to send and receive data across public network as if their network devices were directly connected to the private network. There are many VPN services in MikroTik RouterOS 7. Among them, MikroTik PPTP is a mostly used VPN service. It is a client-server VPN technology. So, a user can access server, printer, IP phone and any other network devices of [...]
More Similar Content
You May Also Like
