can linux read ntfs
Most Relevant Content
How to Mount USB Device in CentOS 7 (NTFS and Linux FS)
USB Hard Disk Drive or USB Flash Drive (Pen drive) is a popular external device that can be used to backup data or transfer data from one device to other device. In GUI (Graphical User Interface) Operating System such as Window or GNOME Desktop in Linux can automatically mount USB device and can show data in it if the File System of that device is supported. But all users do not like or always do not have GUI mode of Operating System specially the CentOS or Red Hat Linux user. In this case, USB device must be mounted manually and then access data from it. On the other hand, by default Linux (CentOS or Red Hat) does not support NTFS File System. But most of the USB devices are usually formatted with NTFS which is a Windows supported file system. To read or write data from NTFS formatted disk in CentOS or Red Hat Linux, a third party application named NTFS-3G have to be used. How to create or delete disk partition with fidisk utility was discussed in my previous article. In this article, I will discuss how to format USB devices and how to mount USB devices in CentOS [...]
- »
CentOS 7 Partition Management with fdisk Utility | February 11, 2019
CentOS or Red Hat Linux is a popular server operating system to the system administrators. Almost all the system admins or IT guys who play with mail server, file server, proxy server and so on are so known with CentOS or Red Hat Linux and cannot go a single day without this operating system. The guys who are also wish to be a system admin should be familiar with CentOS or Red Hat operating system. In my previous article, I [...]
- »
MikroTik IPIP Tunnel with IPsec (Site to Site VPN) | March 18, 2018
VPN (Virtual Private Network) is a technology that provides a secure tunnel across a public network. A private network user can send and receive data to any remote private network using VPN Tunnel as if his/her network device was directly connected to that private network. MikroTik provides IPIP tunnel that is used to create a site to site VPN. IPIP tunnel is a simple protocol that encapsulates IP packets in IP to make a tunnel between two routers. To encapsulate [...]
- »
MikroTik VLAN Routing Configuration with Manageable Switch | July 11, 2018
A VLAN (Virtual LAN) is a group of computers, servers, network printers and other network devices that behave as if they were connected to a single network. VLAN is a logical topology that divides a single broadcast domain into multiple broadcast domains. VLAN is a layer 2 method. So, a manageable switch is required to manage VLAN in your network and a router is required to route and control your inter-VLAN. VLAN increases network security and performance as well as [...]
- »
CentOS 7 Network Configuration Using nmtui Tool | August 27, 2018
After completing CentOS 7 fresh installation, the first task to a system administrator is to configure its network so that it can communicate to other network devices. In my previous article, I discussed how to install CentOS 7.5 GUI (GNOME Desktop) step by step. If you are a new CentOS 7 user and yet you have not installed CentOS 7.5 on your server machine, feel free to study my previous article and install CentOS 7.5 GNOME Desktop according to that [...]
- »
MikroTik Configuration with DHCP WAN Connection | March 24, 2019
MikroTik Router is one of the most popular routers because of having a lot of networking features. MikroTik DHCP Client is a special feature that is used to connect to any DHCP Server. So, if any uplink ISP provides DHCP connection, MikroTik Router is able to connect that DHCP Server using this DHCP Client. In my previous article, I discussed how to configure MikroTik Router with PPPoE WAN Connection. In this article, I will discuss how to configure MikroTik Router [...]
- »
MikroTik Load Balancing and Link Redundancy with PBR | March 31, 2019
In computer networking, the Load Balancing technique is used to send network traffic over multiple gateways. If you have multiple ISP connections available, you can use load balancing technique to establish a stable network. You may now ask, why will I use multiple ISP connections? What are the benefits to use multiple ISP connections in my network? For your satisfaction, the following points are some reasons to use load balancing technique in your network. No ISP can give you 100% [...]
- »
LVM Management in CentOS/Red Hat 7 Linux | March 15, 2019
LVM (Logical Volume Manager) is the recommended partition method for CentOS/Red Hat 7 Linux. Specially, if we work on Mail Server, File Server, FTP Server, Web Proxy Server or any application where disk space changes frequently, the LVM partition is mandatory in this case. In my previous article, I discussed how to install CentOS 7.5 with LVM partitioning. If you are new here or CentOS 7 is not yet installed, I will suggest you to follow my previous article and [...]
- »
MikroTik Site to Site EoIP Tunnel with IPsec | March 21, 2018
VPN (Virtual Private Network) is a technology that provides a secure tunnel across a public network. A private network user can send and receive data to any remote private network using VPN Tunnel as if his/her network device was directly connected to that private network. MikroTik provides EoIP (Ethernet over IP) tunnel that is used to create a site to site VPN. EoIP tunneling is a MikroTik RouterOS protocol that creates an Ethernet tunnel between two MikroTik Routers on top [...]
- »
MikroTik Multiple SSID with Separate LAN and DHCP Server | October 30, 2019
One of the most amazing features of MikroTik Wireless Router is creating Multiple SSID (Virtual AP) on a physical wireless interface. So, creating a Guest WiFi AP with separate LAN block, SSID and DHCP Server is so easy using MikroTik WiFi AP Router. In the previous article, I discussed how to configure MikroTik WiFi Access Point on physical wireless interface with DHCP Server using hAP Lite (RB941-2nD) Wireless Router. In this article I will discuss how to configure a Virtual [...]
More Similar Content
You May Also Like
