centos disk partitioning best practice
Most Relevant Content
CentOS 7.5 Installation with GUI and LVM Partition
Red Hat/CentOS Linux is a popular server operating system. Specially who work on mail server, web server, web proxy server, ftp server and file server are so familiar with the Red Hat/CentOS Linux. In my previous article, I discussed how to install CentOS 7.5 Linux step by step with the standard partition. But if you want to work on mail server, web proxy server, ftp server, file server or any other application where disk space changes frequently, the standard partitioning is not recommended in this case because the standard partitioning is not able to manage disk partition dynamically. On the other hand, LVM (Logical Volume Manager) provides opportunity to manage your partition dynamically. So, LVM partitioning is always recommended for Red Hat/CentOS Linux installation. But LVM partitioning is not as easy as the standard partitioning. You should have knowledge about the basic terms of the LVM partitioning. In this article, I will discuss about the basic terms of LVM and the basic architecture of LVM. I will also discuss how to install CentOS 7.5 Linux with LVM partitioning. LVM Components The following three terms are the basic components of the LVM partitioning. Physical Volume: The underlying physical storage unit of [...]
- »
MikroTik CAPsMAN and CAP Basic Configuration using Winbox | February 20, 2020
MikroTik CAPsMAN (Controlled Access Point system Manager) is a centralized Access Point management application provided by MikroTik. MikroTik introduces CAPsMAN from RouterOS v6.11 with CAPsMAN v1 and from RouterOS v6.22rc7 CAPsMAN v2 is running. If you have multiple MikroTik CAPs (Controlled Access Point) in your organization, CAPsMAN provides an easy way to maintain client data as well as CAPs configuration centrally. In my previous article, I discussed how to configure MikroTik Wireless Router as an Access Point. In this article, [...]
- »
Troubleshooting Common Issues with Security Cameras in MikroTik Networks | February 7, 2025
30 Seconds Summary When fixing security cameras on MikroTik networks, you might see issues like bad video quality, connections dropping, motion detection not working, and security weaknesses. These problems can happen because of not enough internet speed, network congestion, IP conflicts, old software, or weak security. To fix these, make sure you have enough internet speed, set up the IP settings correctly, give camera traffic priority, and update the software regularly. Also, protect the cameras with strong passwords and encryption. [...]
- »
Getting Started with Red Hat Linux | May 20, 2017
Red Hat Linux is an open source server operating system. Although open source Red Hat is a commercial Linux distribution. So, most of the Linux administrators use CentOS because CentOS is a free and open source, enterprise-class and community-supported server platform as well as it is functionally compatible with Red Hat Enterprise Linux. In my previous article, I showed how to install CentOS 7 core packages in your server machine. Today I will introduce you with Red Hat Linux’s command [...]
- »
PPPoE Server Configuration in MikroTik RouterOS 7 | December 2, 2023
MikroTik PPPoE is a client-server protocol and mostly used at the end ISP configuration where MikroTik RouterOS acts as a PPPoE Server and user’s WiFi Router acts as PPPoE client. MikroTik PPPoE Server can be used with MikroTik simple queue management. So, it helps to manage user’s bandwidth easily. People who are trying to do internet business should learn MikroTik PPPoE Server. Configuring PPPoE Server in MikroTik RouterOS 7 is so easy. If you have knowledge on basic RouterOS 7 [...]
- »
WiFi Station Setup in MikroTik Wireless Router | November 27, 2019
MikroTik Wireless Router is capable of working as a WiFi Client. So, if any ISP provides WiFi connection for their clients, MikroTik Wireless Router can be used to connect to that ISP SSID by configuring wireless station mode. MikroTik WiFi station mode finds available SSID and connects with permitted SSID. This wireless connection can be used as wireless WAN connection and configuring LAN, multiple devices can get internet over this wireless WAN connection. In my previous article, I discussed how [...]
- »
MikroTik Router Static DHCP Server Configuration | October 25, 2015
DHCP Server assigns IP address and other related IP information (Subnet mask, Gateway and DNS) automatically to network devices. But automatic DHCP Server has some disadvantages too. If any IP device connects to any automatic DHCP network, the device will get an IP address and related IP information automatically by the DHCP Server and the device will start to use resources of this network. In this situation, the network administrator cannot know who is being connected to the network and [...]
- »
Virtual Web Hosting with Apache on CentOS 7 (Name Based) | July 15, 2019
Virtual Hosting is a method of hosting multiple domains on single server. If you have multiple domains (such as domain1.com, domain2.com and so on) and want to host on a webserver, Virtual Web Hosting is your right choice. Apache web server provides an easy way to manage Virtual Hosting. Virtual Hosting can be either Name Based or IP Based. In Name Based Virtual Hosting, multiple domains can be hosted on single IP address. On the other hand, in IP Based [...]
- »
MikroTik Blocking All Websites Except a Few Websites | May 7, 2019
A few days ago, someone asked me how to block all websites except one with MikroTik Firewall. For this, I have decided to discuss about blocking all websites except someone’s whitelist. Unlike firewall devices, MikroTik Firewall by default allows all websites. So, if you need to block any website, you have to create a firewall rule that will block the specific website. Now if we want to block all websites and want to allow a few websites, we have to [...]
- »
MikroTik Site to Site VPN Configuration with IPsec | March 8, 2018
VPN (Virtual Private Network) is a technology that provides a secure and encrypted tunnel across a public network. A private network user can send and receive data to any remote private network using this VPN Tunnel as if his/her network device was directly connected to that private network. Site to Site VPN technique establishes a secure tunnel between two routers across public network and local networks of these routers can send and receive data through this VPN tunnel. MikroTik RouterOS [...]
You May Also Like
