freeradius mikrotik tutorial
Most Relevant Content
MikroTik Radius Configuration with FreeRADIUS
FreeRADIUS is a high performance RADIUS suite that provides authentication, authorization and accounting facility for a large number of network devices including MikroTik Router. Although MikroTik has user manager RADIUS service to provide authentication, authorization and accounting facility but it is not free for customization and not suitable for medium to large organization. On the other hand, freeRADIUS is free for customization according to your organization requirements. But freeRADIUS has to be customized by you. In my previous article, I discussed how to install and configure freeRADIUS on CentOS 7 Linux distribution. In this article, I will show how to connect MikroTik Router with freeRADIUS Server and authenticate MikroTik login with freeRADIUS users. Network Diagram For this article configuration, I am following a network diagram like below image. In this network, MikroTik Router’s (RouterBOARD 1100 AHX2) WAN interface (ether1) is connected to internet through WAN distribution switch having IP address 192.168.40.8/25. MikroTik Router also has a LAN network having IP network 10.10.60.0/24. The freeRADIUS Server, installed on CentOS 7 Linux Server, is also connected to internet through WAN switch having IP address 192.168.40.10. So, MikroTik Router can see freeRADIUS Server through WAN interface and WAN switch. In this article, we [...]
- »
Ubuntu RADIUS Server Configuration with freeRADIUS | September 3, 2022
Ubuntu Server is one of most popular open-source Linux Server distribution. It is stable and reliable than other Linux distributions. So, enterprise level application can be hosted on Ubuntu Server. Ubuntu RADIUS Server is popularly used for remote authentication and mostly used with the freeRADIUS open source RAIDUS application. freeRADIUS is one of the most popular and powerful AAA (Authorization, Authentication and Accounting) application. Any enterprise (specially ISP company) can use freeRADIUS for AAA solution and can develop billing system. [...]
- »
MikroTik RADIUS Server (User Manager) Installation | October 28, 2017
RADIUS Server is a centralized user authentication, authorization and accounting application. RADIUS authentication gives the ISP or network administrator ability to manage PPP users, login users and Hotspot users from one server throughout a large network. MikroTik RouterOS has a RADIUS client that is able to authenticate login users, Hotspot users and PPP users through a RADIUS server. MikroTik team also developed a totally separate RADIUS server package named User Manager that can be used to authenticate MikroTik users smoothly. [...]
- »
MikroTik IPIP Tunnel with IPsec (Site to Site VPN) | March 18, 2018
VPN (Virtual Private Network) is a technology that provides a secure tunnel across a public network. A private network user can send and receive data to any remote private network using VPN Tunnel as if his/her network device was directly connected to that private network. MikroTik provides IPIP tunnel that is used to create a site to site VPN. IPIP tunnel is a simple protocol that encapsulates IP packets in IP to make a tunnel between two routers. To encapsulate [...]
- »
WireGuard VPN Setup in MikroTik RouterOS7 with Windows OS | August 14, 2022
VPN (Virtual Private Network) is one of the most popular services in MikroTik RouterOS. A lot of VPN services (IPsec, EoIP, OpenVPN, PPTP, L2TP, IPIP etc.) are available in MikroTik RouterOS but in RouterOS7, a new VPN service named WireGuard has been introduced which is extremely simple yet first, secure and modern VPN. WireGuard uses cryptography to make it secure. In RouterOS7, WireGuard can be used either Client-Server (Road Warrior) VPN tunnel or site to site VPN tunnel. Using Client-Server [...]
- »
MikroTik VRRP Configuration with Load Sharing | November 19, 2018
MikroTik VRRP (Virtual Router Redundancy Protocol) ensures high availability internet network. If any organization requires uninterrupted internet connection, MikroTik VRRP implementation will be a vital solution for them. MikroTik VRRP creates a virtual router accumulating two or more physical routers and ensures uninterrupted internet connection keeping activate one physical router always. That means, if any physical router fails to operate due to any hardware failure, MikroTik VRRP uses another backup router for internet gateway until the running router comes back [...]
- »
Red Hat/CentOS Network Configuration | August 4, 2017
Red Hat/CentOS network configuration or IP configuration is an important task to a Linux system administrator. After completing RedHat 7/ CentOS 7 fresh installation, you have to first configure your system network so that it can communicate to other network devices. In my previous article, I discussed how to install CentOS 7 core packages successfully on your physical machine. If you are a new CentOS 7 user and yet you have not installed CentOS on your machine, feel free to study [...]
- »
MikroTik Configuration with DHCP WAN Connection | March 24, 2019
MikroTik Router is one of the most popular routers because of having a lot of networking features. MikroTik DHCP Client is a special feature that is used to connect to any DHCP Server. So, if any uplink ISP provides DHCP connection, MikroTik Router is able to connect that DHCP Server using this DHCP Client. In my previous article, I discussed how to configure MikroTik Router with PPPoE WAN Connection. In this article, I will discuss how to configure MikroTik Router [...]
- »
MikroTik VPN Configuration with Site-to-Site PPTP | February 19, 2018
VPN (Virtual Private Network) is a technology that provides a secure and encrypted tunnel across a public network and using this VPN tunnel a private network user can send and receive data to any remote private network as if his/her network device was directly connected to that private network. MikroTik PPTP is a popular client-server VPN service that provides a secure and encrypted link across public network. MikroTik PPTP can be applied in two methods. Connecting remote workstation/client: In this [...]
- »
MikroTik User Manager RADIUS Installation on RouterOS 7 | July 5, 2022
The User Manager is a MikroTik provided RADIUS Server packages. It can be used to manage users for small or medium level business. User Manger is not a default RouterOS packages. So, we have to install user manager as an extra package in RouterOS 7. RouterOS 7 has brought a massive change on User Manager package. The most important change is managing User Manager from Winbox while in RouterOS 6 the User Manager package can only be managed from Web [...]
More Similar Content
You May Also Like
