how to extend lvm partition in linux
Most Relevant Content
LVM Management in CentOS/Red Hat 7 Linux
LVM (Logical Volume Manager) is the recommended partition method for CentOS/Red Hat 7 Linux. Specially, if we work on Mail Server, File Server, FTP Server, Web Proxy Server or any application where disk space changes frequently, the LVM partition is mandatory in this case. In my previous article, I discussed how to install CentOS 7.5 with LVM partitioning. If you are new here or CentOS 7 is not yet installed, I will suggest you to follow my previous article and install CentOS 7 with LVM partitioning and then continue this article. In this article, I will discuss how to manage LVM partitioning in CentOS/ Red Hat 7 Linux with the command line utility. Basic Components and Architecture of LVM Before going to start LVM management with command line tool, we should have basic knowledge on the basic LVM terms and architecture. The following three terms are the basic components of the LVM partitioning. Physical Volume: The underlying physical storage unit of an LVM is a block device such as a partition of a disk or the whole disk. To use the block device for an LVM logical volume, the device must be initialized as a physical volume (PV). Volume Groups: [...]
- »
CentOS 7 Partition Management with fdisk Utility | February 11, 2019
CentOS or Red Hat Linux is a popular server operating system to the system administrators. Almost all the system admins or IT guys who play with mail server, file server, proxy server and so on are so known with CentOS or Red Hat Linux and cannot go a single day without this operating system. The guys who are also wish to be a system admin should be familiar with CentOS or Red Hat operating system. In my previous article, I [...]
- »
User Management in Linux (Red Hat/CentOS) | September 28, 2017
User management is an important part of Linux (especially Red Hat Enterprise Linux) system administration. Linux users can be administrated using user or group administration GUI (Graphical User Interface) tool as well as through Red Hat/CentOS Linux command prompt. But I will always suggest you to do command line user administration as much as possible because in production GUI will not be provided always. Many people who are learning Linux administration do not know all features of user administration command [...]
- »
VLAN Routing Configuration between MikroTik RouterOS | September 27, 2018
VLAN (Virtual Local Area Network) is a logical topology that divides a single broadcast domain into multiple broadcast domains. It increases network security and performance as well as improves network efficiency. MikroTik VLAN routing configuration with manageable switch was discussed in previous article. Today we will learn how to configure VLAN between MikroTik RouterOS. This Router to router VLAN (layer3 VLAN) is useful when any ISP provide connection to one or more local ISPs who use MikroTik Router to maintain [...]
- »
MikroTik Router Web Proxy Configuration | August 28, 2016
A Proxy Server is usually placed between users and the internet so that the proxy server can track the activities of any user. Formerly, a proxy server was mainly used for caching the static content of any web server because the internet speed was too slow. So, users would get high speed for browsing as if they were browsing a local server. But nowadays the internet bandwidth has increased. So, the proxy server is usually not used for web caching [...]
- »
MikroTik UserMan RADIUS Server Customers, Users and Routers | November 13, 2017
MikroTik User Manager RADIUS Server is a centralized user authentication and accounting application that gives the ISP Company or network administrator ability to manage MikroTik RouterOS user, PPP user and Hotspot user so smoothly. There are two methods to install MikroTik User Manager RADIUS Server in your network. You can install User Manager Package either on a physical RouterOS or on a dedicated Server Machine or on a Personal Computer where RouterOS is running. How to install and configure User [...]
- »
MikroTik VRRP Configuration with Load Sharing | November 19, 2018
MikroTik VRRP (Virtual Router Redundancy Protocol) ensures high availability internet network. If any organization requires uninterrupted internet connection, MikroTik VRRP implementation will be a vital solution for them. MikroTik VRRP creates a virtual router accumulating two or more physical routers and ensures uninterrupted internet connection keeping activate one physical router always. That means, if any physical router fails to operate due to any hardware failure, MikroTik VRRP uses another backup router for internet gateway until the running router comes back [...]
- »
MikroTik IPIP Tunnel with IPsec (Site to Site VPN) | March 18, 2018
VPN (Virtual Private Network) is a technology that provides a secure tunnel across a public network. A private network user can send and receive data to any remote private network using VPN Tunnel as if his/her network device was directly connected to that private network. MikroTik provides IPIP tunnel that is used to create a site to site VPN. IPIP tunnel is a simple protocol that encapsulates IP packets in IP to make a tunnel between two routers. To encapsulate [...]
- »
How to Properly Downgrade MikroTik RouterOS and Firmware | October 2, 2019
MikroTik RouterOS is in constant development and new features or bug fixes are frequently available, sometimes even monthly. So, it is always recommend upgrading MikroTik RouterOS to a latest and stable version before beginning any configuration. But sometimes you may face that the upgraded version is not working properly according to your demand or you may upgrade to a new version that you don’t want. In this case, you should come back to your workable RouterOS version and firmware. Upgrading RouterOS [...]
- »
MikroTik Router Static DHCP Server Configuration | October 25, 2015
DHCP Server assigns IP address and other related IP information (Subnet mask, Gateway and DNS) automatically to network devices. But automatic DHCP Server has some disadvantages too. If any IP device connects to any automatic DHCP network, the device will get an IP address and related IP information automatically by the DHCP Server and the device will start to use resources of this network. In this situation, the network administrator cannot know who is being connected to the network and [...]
More Similar Content
You May Also Like
