l2tp server with ipsec

Most Relevant Content

  • MikroTik Site to Site VPN with L2TP/IPsec

    VPN (Virtual Private Network) is a technology that provides a secure and encrypted tunnel across a public network. A private network user can send and receive data to any remote private network using this VPN Tunnel as if his/her network device was directly connected to that private network. MikroTik L2TP server is one of the most popular VPN services. It provides a secure and encrypted tunnel across public network for transporting IP traffic using PPP. L2TP/IPsec is more secure than MikroTik PPTP VPN server because it uses IP security protocol suite that authenticates and encrypts the packets of data send over a network. MikroTik L2TP Server can be applied in two methods. Connecting remote workstation/client: In this method, a L2TP client supported operating system such as Windows can communicate with MikroTik L2TP server through L2TP tunnel whenever required and can access remote private network as if it was directly connected to the remote private network. Site to Site L2TP: This method is also known as VPN between routers. In this method, a L2TP client supported router always establishes a L2TP tunnel with MikroTik L2TP Server. So, private networks of these routers can communicate to each other as if they were [...]

    READ MORE »

  • More Similar Content

  • »

    MikroTik L2TP/IPsec VPN Configuration (Connecting Remote Client) |   February 26, 2018

    VPN (Virtual Private Network) is a technology that provides a secure and encrypted tunnel across a public network and using this VPN tunnel a private network user can send and receive data to any remote private network as if his/her network device was directly connected to that private network. MikroTik L2TP server is one of the most popular VPN services. It provides a secure and encrypted tunnel across public network for transporting IP traffic using PPP. L2TP/IPsec is more secure [...]

    READ MORE »

  • »

    WireGuard VPN Setup in MikroTik RouterOS7 with Windows OS |   August 14, 2022

    VPN (Virtual Private Network) is one of the most popular services in MikroTik RouterOS. A lot of VPN services (IPsec, EoIP, OpenVPN, PPTP, L2TP, IPIP etc.) are available in MikroTik RouterOS but in RouterOS7, a new VPN service named WireGuard has been introduced which is extremely simple yet first, secure and modern VPN. WireGuard uses cryptography to make it secure. In RouterOS7, WireGuard can be used either Client-Server (Road Warrior) VPN tunnel or site to site VPN tunnel. Using Client-Server [...]

    READ MORE »

  • You May Also Like

  • »

    Static Routing Configuration in MikroTik Router |   February 11, 2018

    Static Routing is an important topic to any network administrator who works with multiple MikroTik RouterOS and wants to establish communication among Router’s local networks. For example, say a network administrator maintains two MikroTik RouterOS connected with any communication medium and each RouterOS has its own networks and network resources such as servers, printers etc. and he wants that each network and network resources will be accessible from other networks. In this case, static routing configuration between two RouterOS will [...]

    READ MORE »

  • »

    MikroTik Site to Site VPN Configuration with IPsec |   March 8, 2018

    VPN (Virtual Private Network) is a technology that provides a secure and encrypted tunnel across a public network. A private network user can send and receive data to any remote private network using this VPN Tunnel as if his/her network device was directly connected to that private network. Site to Site VPN technique establishes a secure tunnel between two routers across public network and local networks of these routers can send and receive data through this VPN tunnel. MikroTik RouterOS [...]

    READ MORE »

  • »

    CentOS 7 Partition Management with fdisk Utility |   February 11, 2019

    CentOS or Red Hat Linux is a popular server operating system to the system administrators. Almost all the system admins or IT guys who play with mail server, file server, proxy server and so on are so known with CentOS or Red Hat Linux and cannot go a single day without this operating system. The guys who are also wish to be a system admin should be familiar with CentOS or Red Hat operating system. In my previous article, I [...]

    READ MORE »

  • »

    CentOS 8 Networking Configuration Using Cockpit Web Console |   January 11, 2021

    The first task after completing CentOS 8 fresh installation is to configure its networking so that it can be accessed from other network devices. In my previous article, I discussed how to install CentOS 8 Graphical User Interface (GNOME Desktop) with step by step screenshots. If you are a new CentOS 8 user and have not yet installed CentOS 8 on your server machine, feel free to follow that article and install CentOS 8 GNOME Desktop according to the article. [...]

    READ MORE »

  • »

    MikroTik Blocking Websites with TLS Host Firewall Matcher |   April 29, 2019

    Most of the websites now use https and blocking https websites is so much harder with the MikroTik RouterOS version less than 6.41. But from RouterOS v6.41, MikroTik Firewall introduces a new property named TLS Host that is capable to match https websites so easily. So, blocking https websites like Facebook, YouTube etc. can be easily done with MikroTik Router if RouterOS version is greater than 6.41. In my previous article, I discussed how to block websites with MikroTik Router [...]

    READ MORE »

  • »

    CAPsMAN Channel Planning with Non-Overlapping Frequency |   March 16, 2020

    MikroTik CAPsMAN is an excellent application for managing multiple CAPs (Controlled Access Point) in a Wireless Network. But multiple APs create frequency overlapping issue if channels are not configured properly. Channel overlapping is required for smooth connection while roaming but there should not be frequency overlapping because frequency overlapping makes wireless performance so poor. In my previous article, I discussed MikroTik CAPsMAN basic configuration with default channel configuration. In this article, I will discuss how to configure CAPsMAN channel to [...]

    READ MORE »

  • »

    VMware ESXi 7.0 Installation and Basic Configuration |   December 1, 2020

    VMware vSphere is the pioneer in virtualization world. No other virtualization software is as feature rich as VMware vSphere. More than 500,000 enterprise data center are now using VMware vSphere. It is expected that most of the data center will be turned into virtualization in near future. As VMware vSphere provides more feature than any other virtualization software, it is also expected that demand of VMware vSphere will increase day by day. VMware ESXi is the foundation of VMware vSphere [...]

    READ MORE »