l2tp server with ipsec
Most Relevant Content
MikroTik Site to Site VPN with L2TP/IPsec
VPN (Virtual Private Network) is a technology that provides a secure and encrypted tunnel across a public network. A private network user can send and receive data to any remote private network using this VPN Tunnel as if his/her network device was directly connected to that private network. MikroTik L2TP server is one of the most popular VPN services. It provides a secure and encrypted tunnel across public network for transporting IP traffic using PPP. L2TP/IPsec is more secure than MikroTik PPTP VPN server because it uses IP security protocol suite that authenticates and encrypts the packets of data send over a network. MikroTik L2TP Server can be applied in two methods. Connecting remote workstation/client: In this method, a L2TP client supported operating system such as Windows can communicate with MikroTik L2TP server through L2TP tunnel whenever required and can access remote private network as if it was directly connected to the remote private network. Site to Site L2TP: This method is also known as VPN between routers. In this method, a L2TP client supported router always establishes a L2TP tunnel with MikroTik L2TP Server. So, private networks of these routers can communicate to each other as if they were [...]
- »
MikroTik L2TP/IPsec VPN Configuration (Connecting Remote Client) | February 26, 2018
VPN (Virtual Private Network) is a technology that provides a secure and encrypted tunnel across a public network and using this VPN tunnel a private network user can send and receive data to any remote private network as if his/her network device was directly connected to that private network. MikroTik L2TP server is one of the most popular VPN services. It provides a secure and encrypted tunnel across public network for transporting IP traffic using PPP. L2TP/IPsec is more secure [...]
- »
WireGuard VPN Setup in MikroTik RouterOS7 with Windows OS | August 14, 2022
VPN (Virtual Private Network) is one of the most popular services in MikroTik RouterOS. A lot of VPN services (IPsec, EoIP, OpenVPN, PPTP, L2TP, IPIP etc.) are available in MikroTik RouterOS but in RouterOS7, a new VPN service named WireGuard has been introduced which is extremely simple yet first, secure and modern VPN. WireGuard uses cryptography to make it secure. In RouterOS7, WireGuard can be used either Client-Server (Road Warrior) VPN tunnel or site to site VPN tunnel. Using Client-Server [...]
- »
OpenVPN Client Configuration in Windows 10/11 | June 29, 2022
OpenVPN is an excellent VPN solution for transmitting data securely over public network. Configuring an OpenVPN Server either on MikroTik RouterOS or Ubuntu Server, we can access local servers or devices from remote place using Windows 10/11, Android or MacOS. How to configure OpenVPN Server in Ubuntu Server was discussed in the previous article. In that article, I also discussed how to create a new OpenVPN client (for Windows OS) who will be able to connect the OpenVPN Server. So, [...]
- »
Smart Camp WiFi Management with MikroTik and GalaxyRAD API | March 31, 2026
In today’s digital-first world, reliable internet access is essential—even in environments like worker camps, training camps, educational programs, and large events. However, managing WiFi in such dynamic setups can be complex. That’s where GalaxyRAD API-powered applications step in—delivering a fully automated, scalable, and intelligent Camp WiFi Management Solution with MikroTik Hotspot. 🌐 Why Camp WiFi Needs a Smart Solution Traditional Hotspot WiFi systems fail in camp environments due to: Frequent user onboarding & offboarding from camp to camp Limited bandwidth [...]
- »
MikroTik DHCP Server Configuration with Radius Server | January 24, 2018
The Dynamic Host Configuration Protocol (DHCP) is a client-server protocol that is used to assign an IP address and other network configuration parameters dynamically to each device on a network so that they can communicate with other IP networks. DHCP Server is popularly used in an Enterprise Office Network because in an office network various types of IP devices such as Laptop, Desktop, Tablet, Smartphone, IP Phone and so on are maintained and almost all IP devices support DHCP. An ISP Network can also be [...]
- »
Managing Disk Partition with the parted Tool in CentOS 7 | March 2, 2019
As a system administrator, sometimes you may require to manage partitions of your CentOS/Red Hat Linux Operating System. Partition management is always a risky task. But there are some useful tools those are so helpful to manage CentOS/Red Hat Linux disk partition easily. In my previous article, I discussed how to manage CentOS/Red Hat 7 HDD partitions with the fdisk utility. The fdisk tool is only eligible to manage MBR partition table. But GPT partition table is now becoming more [...]
- »
FreeRADIUS User Group Management with MySQL | January 3, 2019
FreeRADIUS is a high performance RADIUS Server. A number of network devices can be used with freeRADIUS Server as a RADIUS Client including MikroTik Router. As a modular RADIUS suite, freeRADIUS accepts MySQL module to query user authentication and authorization and to store accounting data. In my previous article, I discussed how to install and configure FreeRADIUS MySQL module. I also discussed how to authenticate MikroTik Login with freeRADIUS MySQL user. In this article, we will talk about how to [...]
- »
CentOS 8 Networking Configuration Using nmtui Tool | December 14, 2020
The first task after completing CentOS 8 fresh installation is to configure its networking so that it can be accessed from other network devices. In my previous article, I discussed how to install CentOS 8 Graphical User Interface (GNOME Desktop) with step by step screenshots. If you are a new CentOS 8 user and have not yet installed CentOS 8 on your server machine, feel free to follow that article and install CentOS 8 GNOME Desktop according to the article. [...]
- »
GNS3 Installation and Configuration Step by Step in Windows | September 14, 2018
GNS3 (Graphical Network Simulator) is one of the most popular network simulator software used by hundreds of thousands of network engineers worldwide to emulate, configure, test and troubleshoot virtual and real networks. GNS3 supports a large number of vendors such as MikroTik, Cisco, Juniper, Windows, Linux and many other vendors. GNS3 can be installed on Windows, Linux and MAC Operating System. In this article, I will show how to download and install GNS3 application in Windows Operating System. I will [...]
More Similar Content
You May Also Like
