linux lvm partition manager
Most Relevant Content
LVM Management in CentOS/Red Hat 7 Linux
LVM (Logical Volume Manager) is the recommended partition method for CentOS/Red Hat 7 Linux. Specially, if we work on Mail Server, File Server, FTP Server, Web Proxy Server or any application where disk space changes frequently, the LVM partition is mandatory in this case. In my previous article, I discussed how to install CentOS 7.5 with LVM partitioning. If you are new here or CentOS 7 is not yet installed, I will suggest you to follow my previous article and install CentOS 7 with LVM partitioning and then continue this article. In this article, I will discuss how to manage LVM partitioning in CentOS/ Red Hat 7 Linux with the command line utility. Basic Components and Architecture of LVM Before going to start LVM management with command line tool, we should have basic knowledge on the basic LVM terms and architecture. The following three terms are the basic components of the LVM partitioning. Physical Volume: The underlying physical storage unit of an LVM is a block device such as a partition of a disk or the whole disk. To use the block device for an LVM logical volume, the device must be initialized as a physical volume (PV). Volume Groups: [...]
- »
CentOS 7.5 Installation with GUI and LVM Partition | March 7, 2019
Red Hat/CentOS Linux is a popular server operating system. Specially who work on mail server, web server, web proxy server, ftp server and file server are so familiar with the Red Hat/CentOS Linux. In my previous article, I discussed how to install CentOS 7.5 Linux step by step with the standard partition. But if you want to work on mail server, web proxy server, ftp server, file server or any other application where disk space changes frequently, the standard partitioning [...]
- »
FreeRADIUS Installation and Basic Configuration on CentOS 7 | November 28, 2018
FreeRADIUS is a modular, high performance and highly customizable open source RADIUS server. Anyone can use FreeRADIUS without any charge and can customize his RADIUS server according to his organizational requirements. In my previous article, I discussed how to install and configure user manager RADIUS server developed by MikroTik. The main disadvantage of user manager RADIUS server is ‘it is not customizable and not suitable for medium or large organization’. On the other hand, FreeRADIUS is giving facility to customize [...]
- »
MikroTik Router Auto Backup via Email | August 23, 2016
MikroTik Router is popularly used not only in ISP network but also in enterprise office network. So, MikroTik is a popular item to network administrator. A regular task of a network administrator is to keep and store router configuration file backup. Almost every network administrator takes configuration file backup manually. But MikroTik Router has an E-mail tool by which network administrators can automate configuration file backup regularly via email and can reduce his daily manual task easily. E-mail tool is [...]
- »
What Are the 7 Layers of OSI Model and How Do They Work | October 5, 2021
The OSI Model stands for Open Systems Interconnection Model, a conceptualized framework used to describe the seven layers of a telecommunication system or network. It was established as an international standard in the year 1984 by the International Organization for Standardization. This model helps visualize how networks operate and is still used today to figure out and solve network problems, such as by a web development company. In this article, we will talk about the 7 layers of the OSI [...]
- »
GNS3 Installation and Configuration Step by Step in Windows | September 14, 2018
GNS3 (Graphical Network Simulator) is one of the most popular network simulator software used by hundreds of thousands of network engineers worldwide to emulate, configure, test and troubleshoot virtual and real networks. GNS3 supports a large number of vendors such as MikroTik, Cisco, Juniper, Windows, Linux and many other vendors. GNS3 can be installed on Windows, Linux and MAC Operating System. In this article, I will show how to download and install GNS3 application in Windows Operating System. I will [...]
- »
MikroTik RouterOS User Authentication via RADIUS Server | November 19, 2017
MikroTik RouterOS has a strong local user database that is enough to manage a single MikroTik RouterOS user. But if your network has more than one MikroTik Routers, it is always better to use a RADIUS server to manage RouterOS user centrally. MikroTik User Manager RADIUS Server is a centralized user authentication and accounting application that gives the ISP Company or network administrator ability to manage not only RouterOS users but also PPP, Hotspot, DHCP and Wireless users. How to [...]
- »
MikroTik Hotspot with Bandwidth Limitation and Prepaid Billing System | January 14, 2018
Say, you are a network administrator and want to establish a network that will have user bandwidth package management facility with prepaid billing system as well as partner advertisement facility. Then, MikroTik Hotspot Server Configuration with MikroTik User Manager Radius Server will be a wise decision. Because, MikroTik User Manager Radius Server is a user authentication, authorization and accounting application that will give facility to manage user bandwidth package with prepaid billing system. On the other hand, you can easily [...]
- »
How to Use Old Router as Range Extender to Boost WiFi Signal | October 7, 2019
WiFi is a technology to turn wired internet into WiFi internet and used in every home and office. Wireless internet gives you the freedom to use the internet without sitting in a single place. It is also true that speed performance drop in Wi-fi due to weak signal or interference. Sometimes laying a physical wired connection in every room is not possible. So Wi-Fi range extender setup helps you to boost signal strength. Instead of buying a new range extender [...]
- »
How to Add New Domains to BIND DNS Server | July 5, 2019
DNS (Domain Name System) Server is an essential part to any computer network. So, it is always suggest keeping a DNS Server in every network. How to configure a DNS Server with BIND package was discussed in my previous article. A common question among the fresher admins of BIND DNS is how to add a new domain to BIND DNS Server. For this, this article is designed to discuss the proper way to add multiple domains to BIND DNS Server. [...]
More Similar Content
You May Also Like
