load balance mikrotik pppoe
Most Relevant Content
MikroTik Load Balancing with 2 PPPoE and 1 Static WAN using ECMP
ECMP provides almost 100% reliable load balancing and link redundancy solution. ECMP is a per connection load balancing where connection is marked with source and destination IP pair. In my previous article I discussed how to configure DUAL WAN load balancing with failover using ECMP method where WAN connections were static IP Addresses. But some ISP companies use PPPoE service for their client connection. So, some network administrators become confused to configure load balancing with PPPoE WAN connection because PPPoE WAN connection is a little bit complex than static WAN connection. Some of my loyal readers also ask me to make a tutorial on Load Balancing with PPPoE Client. So, in this article I will discuss how to configure Load Balancing with Failover over two PPPoE WAN connections and one static WAN connection in MikroTik Router. Network Diagram We will configure Multi WAN load balancing using ECMP method according to the following network diagram. In this network, MikroTik Router’s ether1 port is connected to ISP1 with PPPoE WAN connection (username: wan1 and Password: wan1) and ether2 port is connected to ISP2 with PPPoE WAN connection (username: wan2 and Password: wan2) and ether3 port is connected ISP3 with IP block 172.25.25.0/30 [...]
- »
Hardening MikroTik RouterOS by Limiting Login Services | February 6, 2021
MikroTik RouterOS is usually used as a bridge between WAN and LAN network. WAN network is always an insecure network because attackers always try to hack your RouterOS so that they can compromise it for their own benefit. As a network administrator of MikroTik RouterOS, we should always take anti hacking steps to secure our MikroTik RouterOS. There are a lot of security tasks those we should take care to secure our MikroTik RouterOS. Among these security tasks, we will [...]
- »
MikroTik Hotspot with Data Limit and Prepaid Billing System | January 19, 2018
If you are a network administrator and want to establish a network that will have data limitation package with prepaid billing system, MikroTik Hotspot Server with MikroTik User Manager Radius Server will be your best solution. Because, MikroTik User Manager is a poplar Radius application that will give facility to manage user data package as well as prepaid billing system efficiently. On the other hand, MikroTik Hotspot is a popular service that will help to connect your network user without [...]
- »
How to Secure MikroTik RouterOS Login Users | February 19, 2021
MikroTik RouterOS is a bridge between WAN and LAN. So, it is mandatory to apply RouterOS login user security policy. Otherwise, RouterOS may so insecure.
- »
MikroTik Port Forwarding using Winbox | July 23, 2018
MikroTik Port Forwarding or Port Mapping is a NAT application that is used to redirect a request from MikroTik IP address and port number combination to a local IP address and port number. For example, if you have a Web Server or FTP Server in your private/local area and want to access this local server from outside of your local area (from internet/public), you can apply MikroTik port forwarding or port mapping and can easily access your Web Server or [...]
- »
MikroTik User Manager RADIUS Installation on RouterOS 7 | July 5, 2022
The User Manager is a MikroTik provided RADIUS Server packages. It can be used to manage users for small or medium level business. User Manger is not a default RouterOS packages. So, we have to install user manager as an extra package in RouterOS 7. RouterOS 7 has brought a massive change on User Manager package. The most important change is managing User Manager from Winbox while in RouterOS 6 the User Manager package can only be managed from Web [...]
- »
GNS3 Installation and Configuration Step by Step in Windows | September 14, 2018
GNS3 (Graphical Network Simulator) is one of the most popular network simulator software used by hundreds of thousands of network engineers worldwide to emulate, configure, test and troubleshoot virtual and real networks. GNS3 supports a large number of vendors such as MikroTik, Cisco, Juniper, Windows, Linux and many other vendors. GNS3 can be installed on Windows, Linux and MAC Operating System. In this article, I will show how to download and install GNS3 application in Windows Operating System. I will [...]
- »
MikroTik Hotspot Login by MAC Cookie Configuration | July 10, 2020
MAC Cookie is a newly introduced Hotspot feature in MikroTik Router. MAC Cookie is specially designed to improve accessibility for smartphones, laptop and other mobile devices. MAC Cookie is not a basic login method rather it is an extension of basic Hotspot login method such as HTTP CHAP, HTTP PAP and HTTPS. So, when MAC Cookie is used with these basic Hotspot login methods, it improves the Hotspot user accessibility. In my previous article, I discussed MikroTik Hotspot basic configuration [...]
- »
MikroTik Router First Time Startup and Setup using WebFig | April 17, 2018
I guess, you have purchased a new MikroTik Router or installed a new MikroTik RouterOS on PC and you are searching How to Start MikroTik Router First Time and How to Complete Basic RouterOS Configuration using WebFig (Web Interface) for running a basic network. If these are your concern, don’t worry, in this article I will show how to startup your MikroTik Router first time and complete RouterOS basic configuration using WebFig web interface so easily. There are three methods [...]
- »
MikroTik Hotspot Auto Login by MAC Address | July 1, 2020
Hotspot is an awesome service in MikroTik Router. MikroTik Hotspot is popularly used in ISP, Hotel, Airport, Coffee Shop, Enterprise office and many other organizations. By default MikroTik Hotspot uses HTTP CHAP login method where user must provide username and password to get internet service. Sometimes we may face that some users are not eager to provide username and password to get internet service or we cannot ask some users to put username and password to get internet due to [...]
You May Also Like
