load balancing mikrotik with pbr
Most Relevant Content
MikroTik Load Balancing and Link Redundancy with PBR
In computer networking, the Load Balancing technique is used to send network traffic over multiple gateways. If you have multiple ISP connections available, you can use load balancing technique to establish a stable network. You may now ask, why will I use multiple ISP connections? What are the benefits to use multiple ISP connections in my network? For your satisfaction, the following points are some reasons to use load balancing technique in your network. No ISP can give you 100% uptime guarantee. So, it will be better to use more than one ISP connection to ensure 100% uptime network. Sometimes you may have dependency (such as Mail, IPPBX etc.) on your uplink ISP but their service is not so good. In this case, you can use another ISP which provides better service. Your current ISP is better but high paid bandwidth. In this case, you can purchase another ISP bandwidth which is cheap but their connection is good, not better. If these are your current status, it is suggested to configure a load balancing and link redundancy network with multiple gateways. MikroTik Router has various load balancing and link redundancy methods (such as ECMP method, PCC method and PBR method) [...]
- »
MikroTik Load Balancing over Multiple Gateways (2 WAN) | October 13, 2016
Load Balancing is a technique used to send network traffic over multiple gateways. If you have multiple ISP connections in your network, you can send your network traffic through those ISP connections and can make a load balancing network. Accidently you may ask me, why will I use multiple ISP connections? What are the benefits to use multiple ISP connections in my network? I will say, ask yourself deeply then you will find the reasons why multiple ISP connections is [...]
- »
Troubleshooting Common Issues with Security Cameras in MikroTik Networks | February 7, 2025
30 Seconds Summary When fixing security cameras on MikroTik networks, you might see issues like bad video quality, connections dropping, motion detection not working, and security weaknesses. These problems can happen because of not enough internet speed, network congestion, IP conflicts, old software, or weak security. To fix these, make sure you have enough internet speed, set up the IP settings correctly, give camera traffic priority, and update the software regularly. Also, protect the cameras with strong passwords and encryption. [...]
- »
MikroTik Router Integration and Configuration on GNS3 | September 19, 2018
GNS3 is a network simulator software used by hundreds of thousands of network engineers worldwide to emulate, configure, test and troubleshoot virtual and real networks. GNS3 can talk a large number of network vendors including MikroTik. MikroTik introduces Cloud Hosted Router (a RouterOS version) that is used to run as virtual machine and a virtual machine can easily be integrated with GNS3. So, network administrators who are fond of MikroTik Router can now configure, test and troubleshoot their MikroTik network [...]
- »
VMware ESXi 7.0 Installation and Basic Configuration | December 1, 2020
VMware vSphere is the pioneer in virtualization world. No other virtualization software is as feature rich as VMware vSphere. More than 500,000 enterprise data center are now using VMware vSphere. It is expected that most of the data center will be turned into virtualization in near future. As VMware vSphere provides more feature than any other virtualization software, it is also expected that demand of VMware vSphere will increase day by day. VMware ESXi is the foundation of VMware vSphere [...]
- »
MikroTik IPIP Tunnel with IPsec (Site to Site VPN) | March 18, 2018
VPN (Virtual Private Network) is a technology that provides a secure tunnel across a public network. A private network user can send and receive data to any remote private network using VPN Tunnel as if his/her network device was directly connected to that private network. MikroTik provides IPIP tunnel that is used to create a site to site VPN. IPIP tunnel is a simple protocol that encapsulates IP packets in IP to make a tunnel between two routers. To encapsulate [...]
- »
Setting Google as Default Search Engine | September 30, 2015
Google is one of the most popular search engines to any online user. It is said that no online user cannot go a single day without Google search engine. Google search statistics shows that over 40,000 search queries are processed every second by Google. If you have any query about any subject, just type in Google search box and Google will show you billion of results related to your search query within less than a second. So, usually you will want [...]
- »
NGINX Web Server Installation and Configuration in Ubuntu | September 7, 2024
NGINX is a feature rich and high-performance software which is mainly used for Web Server. NGINX can also be used as a proxy server, load balancer, mail proxy and HTTP Cache Server. NGINX is a free and open-source software and can be run on Linux, Windows. macOS and other operating systems. NGINX is a single-thread based application. So, it can handle unlimited client requests using asynchronous technique. NGINX processes highly efficient run loops in a single-thread process called workers. Workers accept [...]
- »
MikroTik Send Browsing Log to Remote Syslog Server | August 18, 2019
MikroTik RouterOS is capable of logging various system events as well as user browsing information. Logs can be saved in router’s memory (RAM), disk, file, sent by email or even sent to remote syslog server. Sometimes it may require saving user browsing log by the law. So, a syslog server is an essential part to any network. In this article, I will discuss how to configure MikroTik Router to keep user browsing log and send that log to remote syslog [...]
- »
Ubuntu Web Server Configuration with phpMyAdmin (LAMP Stack) | July 12, 2021
Ubuntu Server is one of the most popular open source operating systems that can be used in production without any hassle. In my previous article, I discussed how to install Ubuntu Server with LVM partition. I also discussed how to assign static IP address on Ubuntu Server interface with Netplan network management tool. Ubuntu web server is a popular service because web developers usually use Ubuntu Server for their development project. Besides development project, Ubuntu web server can also be [...]
More Similar Content
You May Also Like
