local dns server with centos7 linux
Most Relevant Content
DNS Server Configuration on CentOS 7 (Caching DNS with BIND)
DNS (Domain Name System) Server is an essential part to any computer network. Today web communication cannot imagine without DNS Server. DNS is a client server protocol where DNS Client requests for the domain name resolution and DNS Server response on it. Every network should have a DNS Server because local DNS Server improves network performance by caching DNS information and serving DNS request locally. DNS Server can be configured either Windows or Linux operating system. In this article, I will discuss how to configure a caching DNS Server on CentOS 7/ RedHat 7 Linux with BIND9 Service. Domain Name System (DNS) and How It Works Communication between a workstation (PC) and a Server are always done by IP address. So, to get any information from any Web Server, you have to remember the IP address of that Server. But remembering a huge number of public IP addresses is almost impossible for the human being. To solve this issue, DNS technique is introduced in computer networking. The DNS technique can be best compared to a phone book where a user finds a phone number listed by the easier-to-remember name. So, the DNS can be defined as a mapper between human [...]
- »
Red Hat/CentOS Network Configuration | August 4, 2017
Red Hat/CentOS network configuration or IP configuration is an important task to a Linux system administrator. After completing RedHat 7/ CentOS 7 fresh installation, you have to first configure your system network so that it can communicate to other network devices. In my previous article, I discussed how to install CentOS 7 core packages successfully on your physical machine. If you are a new CentOS 7 user and yet you have not installed CentOS on your machine, feel free to study [...]
- »
MikroTik PCC Load Balancing over Unequal Dual WAN Links | June 12, 2018
Hi, you are here means you are finding a Load Balancing and Link Redundancy solution with Unequal WAN links in your MikroTik Router. If so, it is your right place. In my previous article I discussed how to configure a Dual WAN Load Balancing and Link Redundancy network using PCC method but it was assumed that both WAN links have equal bandwidth. But in real situation, you may have unequal WAN links such as ISP1 may have 10MB bandwidth and [...]
- »
MikroTik HotSpot One to One NAT/Universal HotSpot NAT | September 27, 2020
MikroTik Hotspot is an awesome service that can be customized widely. When MikroTik Hotspot is enabled on an interface, it adds dynamic destination NAT rules which will redirect all HTTP and HTTPS requests from unauthorized users to the Hotspot authentication proxy. So, no user can get internet access in Hotspot network without authentication. MikroTik Hotspot also uses one to one NAT providing an IP address from selected IP Pool and this IP address handles user’s data and limitation. Sometimes we [...]
- »
Why ISPs Should Embrace TR-069 ACS to Stay Ahead of Competitors | May 22, 2023
As the telecommunications industry becomes more competitive, local ISPs need to find ways to stay ahead of larger telcos and offer services that meet the changing demands of their customers. One of the solutions to this challenge is to implement TR-069 ACS server to help streamline network management, reduce costs, and increase efficiency. In this article, we’ll explore why the TR-069 ACS server is essential for medium-sized ISPs to stay competitive in today’s market. We’ll examine the challenges these ISPs [...]
- »
DHCP Server Configuration in MikroTik RouterOS 7 | October 14, 2015
Dynamic Host Configuration Protocol (DHCP) is a client/server protocol. DHCP server automatically provides an Internet Protocol (IP) address and other related information such as subnet mask, default gateway and DNS to DHCP clients. DHCP server and client use UDP port 67 and 68 for communication. In a network, a DHCP client (IP devices such as Desktop, Laptop, Smartphone etc.) requests for an IP lease to DHCP servers and a DHCP server responses allocating IP address and other related IP information [...]
- »
Troubleshooting Common Issues with Security Cameras in MikroTik Networks | February 7, 2025
30 Seconds Summary When fixing security cameras on MikroTik networks, you might see issues like bad video quality, connections dropping, motion detection not working, and security weaknesses. These problems can happen because of not enough internet speed, network congestion, IP conflicts, old software, or weak security. To fix these, make sure you have enough internet speed, set up the IP settings correctly, give camera traffic priority, and update the software regularly. Also, protect the cameras with strong passwords and encryption. [...]
- »
Hardening MikroTik RouterOS by Limiting Login Services | February 6, 2021
MikroTik RouterOS is usually used as a bridge between WAN and LAN network. WAN network is always an insecure network because attackers always try to hack your RouterOS so that they can compromise it for their own benefit. As a network administrator of MikroTik RouterOS, we should always take anti hacking steps to secure our MikroTik RouterOS. There are a lot of security tasks those we should take care to secure our MikroTik RouterOS. Among these security tasks, we will [...]
- »
Single IP NAT Strategy in MikroTik RouterOS 7 | September 29, 2015
MikroTik Router has a lot of features which help to customize network as our requirement. Sometimes, it may be our requirement that we need to allow internet access on per IP. Normally, when we apply masquerade NAT rule in our MikroTik Router, all private IPs will be masqueraded or a network block will be masqueraded. If we do normal masqurade and enable a DHCP Server in our network, we may face a lot of unauthorized access in our network. Because [...]
- »
MikroTik Configuration with PPPoE WAN Connection | July 18, 2018
MikroTik Router is a popular routing device to any network administrator because of having a lot of network features availability. MikroTik PPPoE Client is a special feature that is used to connect any PPPoE Server. If your ISP provides PPPoE connection, MikroTik Router is able to connect that PPPoE Server using PPPoE Client. In my previous article, I discussed how to configure MikroTik Router with static WAN connection and in this article I will show how to configure MikroTik Router [...]
More Similar Content
You May Also Like
