lvm disk in centos/redhat 7
Most Relevant Content
CentOS 7.5 Installation with GUI and LVM Partition
Red Hat/CentOS Linux is a popular server operating system. Specially who work on mail server, web server, web proxy server, ftp server and file server are so familiar with the Red Hat/CentOS Linux. In my previous article, I discussed how to install CentOS 7.5 Linux step by step with the standard partition. But if you want to work on mail server, web proxy server, ftp server, file server or any other application where disk space changes frequently, the standard partitioning is not recommended in this case because the standard partitioning is not able to manage disk partition dynamically. On the other hand, LVM (Logical Volume Manager) provides opportunity to manage your partition dynamically. So, LVM partitioning is always recommended for Red Hat/CentOS Linux installation. But LVM partitioning is not as easy as the standard partitioning. You should have knowledge about the basic terms of the LVM partitioning. In this article, I will discuss about the basic terms of LVM and the basic architecture of LVM. I will also discuss how to install CentOS 7.5 Linux with LVM partitioning. LVM Components The following three terms are the basic components of the LVM partitioning. Physical Volume: The underlying physical storage unit of [...]
- »
MikroTik Site to Site GRE Tunnel Configuration with IPsec | March 26, 2018
VPN (Virtual Private Network) is a technology that provides a secure tunnel across a public network. A private network user can send and receive data to any remote private network using VPN Tunnel as if his/her network device was directly connected to that private network. MikroTik provides GRE (Generic Routing Encapsulation) tunnel that is used to create a site to site VPN tunnel. GRE tunneling protocol which can encapsulate a wide variety of protocols creating a virtual point-to-point link was [...]
- »
Ubuntu Web Server Configuration with phpMyAdmin (LAMP Stack) | July 12, 2021
Ubuntu Server is one of the most popular open source operating systems that can be used in production without any hassle. In my previous article, I discussed how to install Ubuntu Server with LVM partition. I also discussed how to assign static IP address on Ubuntu Server interface with Netplan network management tool. Ubuntu web server is a popular service because web developers usually use Ubuntu Server for their development project. Besides development project, Ubuntu web server can also be [...]
- »
DNS Server Configuration on CentOS 7 (Caching DNS with BIND) | June 24, 2019
DNS (Domain Name System) Server is an essential part to any computer network. Today web communication cannot imagine without DNS Server. DNS is a client server protocol where DNS Client requests for the domain name resolution and DNS Server response on it. Every network should have a DNS Server because local DNS Server improves network performance by caching DNS information and serving DNS request locally. DNS Server can be configured either Windows or Linux operating system. In this article, I [...]
- »
MikroTik WiFi Frequency Band and Channel Width Explanation | January 10, 2020
MikroTik WiFi frequency, band and channel width tuning is an important task in any wireless network. If we fail to setup WiFi frequency and channel width parameter properly, we will notice a poor performance of wireless network. WiFi is aimed at use within unlicensed spectrum and the unlicensed spectrum that is usually used for WiFi is 2.4 GHz and 5 GHz band. 2.4 GHz and 5 GHz bands have multiple channels and these channels must be setup properly to get [...]
- »
How to Mount USB Device in CentOS 7 (NTFS and Linux FS) | February 18, 2019
USB Hard Disk Drive or USB Flash Drive (Pen drive) is a popular external device that can be used to backup data or transfer data from one device to other device. In GUI (Graphical User Interface) Operating System such as Window or GNOME Desktop in Linux can automatically mount USB device and can show data in it if the File System of that device is supported. But all users do not like or always do not have GUI mode of [...]
- »
MikroTik Load Balancing over Multiple Gateways (2 WAN) | October 13, 2016
Load Balancing is a technique used to send network traffic over multiple gateways. If you have multiple ISP connections in your network, you can send your network traffic through those ISP connections and can make a load balancing network. Accidently you may ask me, why will I use multiple ISP connections? What are the benefits to use multiple ISP connections in my network? I will say, ask yourself deeply then you will find the reasons why multiple ISP connections is [...]
- »
How to Assign VMware ESXi License Key | December 4, 2021
No doubt VMware is the pioneer in virtualization world. VMware can be used either premium or free based on licensing. In the previous article, I discussed how to install VMware ESXi on a physical server or machine and then I also discussed how to get VMware ESXi free license from VMware website. Getting VMware ESXi license key either premium or free, we may sometimes get confused how to assign the license key in VMware ESXi host. So, in this article [...]
- »
Securing MikroTik Router with Port Knocking | March 21, 2021
MikroTik Port Knocking strategy helps to protect MikroTik Router from hackers and unauthorized access as well as enhances MikroTik RouterOS security.
- »
MikroTik Hotspot HTTPS Redirect and HTTPS Login Setup | May 24, 2020
MikroTik Hotspot is one of the most popular services in MikroTik Router. It is a policy to authorize network clients before to access local network resources as well as public network resources through MikroTik Router. In my previous article I discussed MikroTik Hotspot Configuration using Winbox. But default MikroTik Hotspot configuration faces HTTPS Redirect and HTTPS Login issues. To solve these issues, MikroTik Hotspot HTTPS configuration is required. So, in this article I will discuss how to configure MikroTik Hotspot [...]
You May Also Like