mikrotik basic wifi setup

Most Relevant Content

  • MikroTik Multiple SSID with Separate LAN and DHCP Server

    One of the most amazing features of MikroTik Wireless Router is creating Multiple SSID (Virtual AP) on a physical wireless interface. So, creating a Guest WiFi AP with separate LAN block, SSID and DHCP Server is so easy using MikroTik WiFi AP Router. In the previous article, I discussed how to configure MikroTik WiFi Access Point on physical wireless interface with DHCP Server using hAP Lite (RB941-2nD) Wireless Router. In this article I will discuss how to configure a Virtual WiFi AP on the physical interface with another SSID, LAN block and DHCP Server for guest wireless devices. Network Diagram The following network diagram is being followed for this article configuration. In this network diagram, hAP lite MikroTik Wireless Router is being used as a WiFi AP and LAN gateway. This wireless router has one WLAN interface and four Ethernet interfaces. WiFi AP has been created on WLAN interface so that wireless devices can be connected. We will now create another Virtual WiFi AP with separate SSID on this WLAN interface creating a virtual WLAN interface. The virtual WiFi AP will be used as Guest WiFi AP so that guest user can be connected with this different SSID and security [...]

    READ MORE »

  • More Similar Content

  • »

    PPPoE Server Configuration in MikroTik RouterOS 7 |   December 2, 2023

    MikroTik PPPoE is a client-server protocol and mostly used at the end ISP configuration where MikroTik RouterOS acts as a PPPoE Server and user’s WiFi Router acts as PPPoE client. MikroTik PPPoE Server can be used with MikroTik simple queue management. So, it helps to manage user’s bandwidth easily. People who are trying to do internet business should learn MikroTik PPPoE Server. Configuring PPPoE Server in MikroTik RouterOS 7 is so easy. If you have knowledge on basic RouterOS 7 [...]

    READ MORE »

  • »

    MikroTik Hotspot Configuration with ECMP Load Balancing |   September 4, 2021

    MikroTik Hotspot is one of the most popular services in MikroTik RouterOS and day be day the demand of Hotspot service is increasing. MikroTik Hotspot can be used in any Airport, Hotel, Restaurant, Campus, Camp, Office or any ISP network. It is also possible to establish a WiFi Broadband Network with the MikroTik Hotspot service. How to configure MikroTik Hotspot was discussed in one of my previous articles. Although MikroTik Hotspot configuration is not so difficult but sometimes we face [...]

    READ MORE »

  • »

    MikroTik Wireless AP Configuration with DHCP using Winbox |   October 22, 2019

    MikroTik Wireless Router is one of the most popular and stable WiFi Routers. WiFi Zone for an ISP or for an office or for a home can easily be configured with MikroTik WiFi Router. MikroTik has a lot of WiFi Routers that can be used as a WiFi Access Point (AP), a WiFi Station or a WiFi Repeater. MikroTik Wireless Router can also be used as both WiFi Station and WiFi AP simultaneously. The simple usage of MikroTik Wireless Router [...]

    READ MORE »

  • »

    MikroTik Router First Time Startup and Setup using WebFig |   April 17, 2018

    I guess, you have purchased a new MikroTik Router or installed a new MikroTik RouterOS on PC and you are searching How to Start MikroTik Router First Time and How to Complete Basic RouterOS Configuration using WebFig (Web Interface) for running a basic network. If these are your concern, don’t worry, in this article I will show how to startup your MikroTik Router first time and complete RouterOS basic configuration using WebFig web interface so easily. There are three methods [...]

    READ MORE »

  • »

    Mikrotik Router Basic Configuration Using Winbox |   August 24, 2015

    MikroTik is one of the most popular routers. MikroTik Router has a lot of networking services that help to build a stable and smooth network so easily. It is said that any ISP Company or any Enterprise Office cannot go a single day without MikroTik Router. So, system administrators who are not using MikroTik Router yet, they will soon start using MikroTik Router, I think. As a system administrator, I am also using MikroTik Router about 5 years in my network [...]

    READ MORE »

  • You May Also Like

  • »

    How to Properly Downgrade MikroTik RouterOS and Firmware |   October 2, 2019

    MikroTik RouterOS is in constant development and new features or bug fixes are frequently available, sometimes even monthly. So, it is always recommend upgrading MikroTik RouterOS to a latest and stable version before beginning any configuration. But sometimes you may face that the upgraded version is not working properly according to your demand or you may upgrade to a new version that you don’t want. In this case, you should come back to your workable RouterOS version and firmware. Upgrading RouterOS [...]

    READ MORE »

  • »

    MikroTik Load Balancing and Link Redundancy with PBR |   March 31, 2019

    In computer networking, the Load Balancing technique is used to send network traffic over multiple gateways. If you have multiple ISP connections available, you can use load balancing technique to establish a stable network. You may now ask, why will I use multiple ISP connections? What are the benefits to use multiple ISP connections in my network? For your satisfaction, the following points are some reasons to use load balancing technique in your network. No ISP can give you 100% [...]

    READ MORE »

  • »

    MikroTik RADIUS Server (User Manager) Installation |   October 28, 2017

    RADIUS Server is a centralized user authentication, authorization and accounting application. RADIUS authentication gives the ISP or network administrator ability to manage PPP users, login users and Hotspot users from one server throughout a large network. MikroTik RouterOS has a RADIUS client that is able to authenticate login users, Hotspot users and PPP users through a RADIUS server. MikroTik team also developed a totally separate RADIUS server package named User Manager that can be used to authenticate MikroTik users smoothly. [...]

    READ MORE »

  • »

    LVM Management in CentOS/Red Hat 7 Linux |   March 15, 2019

    LVM (Logical Volume Manager) is the recommended partition method for CentOS/Red Hat 7 Linux. Specially, if we work on Mail Server, File Server, FTP Server, Web Proxy Server or any application where disk space changes frequently, the LVM partition is mandatory in this case. In my previous article, I discussed how to install CentOS 7.5 with LVM partitioning. If you are new here or CentOS 7 is not yet installed, I will suggest you to follow my previous article and [...]

    READ MORE »