mikrotik dual wan router using ecmp
Most Relevant Content
MikroTik Unequal Dual WAN Load Balancing with Failover using ECMP
MikroTik Router is capable of doing Load Balancing with Failover over multiple gateways. Policy Based Routing, ECMP, PCC and NTH Load Balancing are the popular load balancing methods in MikroTik Router. Among these methods, ECMP is so easy to configure and provides almost 100% load balancing and link redundancy solution. In my previous article, I discussed how to configure Load Balancing and Link Redundancy using ECMP over two equal bandwidth gateways. ECMP method is also capable of doing load balancing over unequal bandwidth gateway. In this article, I will discuss how to configure load balancing with failover over two unequal bandwidth gateways using ECMP method. ECMP (Equal Cost Multi Path) Routing ECMP stands for Equal-Cost Multi-Path routing. ECMP is persistent per-connection load balancing or per-src-dst-address combination load balancing where a new gateway is chosen for each source and destination IP pair. It means that, for example, one FTP connection will use only one link, but new connection to a different server will use another link. Network Diagram We will configure Dual WAN load balancing over two unequal gateways using ECMP method according to the following diagram. In this network, MikroTik Router’s ether1 port is connected to ISP1 with IP block 192.168.30.0/30 and [...]
- »
MikroTik Load Balancing with 2 PPPoE and 1 Static WAN using ECMP | September 24, 2019
ECMP provides almost 100% reliable load balancing and link redundancy solution. ECMP is a per connection load balancing where connection is marked with source and destination IP pair. In my previous article I discussed how to configure DUAL WAN load balancing with failover using ECMP method where WAN connections were static IP Addresses. But some ISP companies use PPPoE service for their client connection. So, some network administrators become confused to configure load balancing with PPPoE WAN connection because PPPoE [...]
- »
MikroTik Load Balancing and Link Redundancy with PBR | March 31, 2019
In computer networking, the Load Balancing technique is used to send network traffic over multiple gateways. If you have multiple ISP connections available, you can use load balancing technique to establish a stable network. You may now ask, why will I use multiple ISP connections? What are the benefits to use multiple ISP connections in my network? For your satisfaction, the following points are some reasons to use load balancing technique in your network. No ISP can give you 100% [...]
- »
MikroTik Dual WAN Load Balancing with Failover using PCC | May 27, 2018
Hi geek, going through this article means you are finding Load Balancing as well as Link Redundancy solution for your MikroTik network because you already have multiple WAN connections or you are planning to lease multiple WAN connections. MikroTik has various Load Balancing and Link Redundancy methods such as ECMP, PCC and so on. ECMP method provides an easy configurable load balancing with failover solution but it has some known issues too in a large network. On the hand, PCC [...]
- »
MikroTik Load Balancing and Link Redundancy with ECMP | October 28, 2016
Load balancing and link redundancy is the main concern to any network administrator. Because, they always want to keep live their network 24/7. If you have multiple WAN connections, you can easily make a load balancing as well as link redundancy network with MikroTik Router. Different types of load balancing and link redundancy are present in MikroTik Router. ECMP Load Balancing is one of them. ECMP is so easy to implement and it provides an perfect load balancing solution. In this [...]
- »
MikroTik Load Balancing over Multiple Gateways (2 WAN) | October 13, 2016
Load Balancing is a technique used to send network traffic over multiple gateways. If you have multiple ISP connections in your network, you can send your network traffic through those ISP connections and can make a load balancing network. Accidently you may ask me, why will I use multiple ISP connections? What are the benefits to use multiple ISP connections in my network? I will say, ask yourself deeply then you will find the reasons why multiple ISP connections is [...]
- »
Ubuntu RADIUS Server Configuration with freeRADIUS | September 3, 2022
Ubuntu Server is one of most popular open-source Linux Server distribution. It is stable and reliable than other Linux distributions. So, enterprise level application can be hosted on Ubuntu Server. Ubuntu RADIUS Server is popularly used for remote authentication and mostly used with the freeRADIUS open source RAIDUS application. freeRADIUS is one of the most popular and powerful AAA (Authorization, Authentication and Accounting) application. Any enterprise (specially ISP company) can use freeRADIUS for AAA solution and can develop billing system. [...]
- »
How to Get Free SSL Certificate from ZeroSSL | June 13, 2020
SSL/TLS certificate is an essential part in today internet communication. Online communication cannot imagine without SSL/TLS certificate. SSL/TLS certificate makes online communication secure by encrypting data transmitted over public internet. So, most of the applications (Web, Email and VPN services) those transmit data over public internet use SSL/TLS certificate to secure communication. SSL/TLS certificate requires to be signed by Certificate Authority (CA). It is possible to create self-signed certificate with SSL certificate creation tools such as OpenSSL. Some router venders [...]
- »
Getting Started with Red Hat Linux | May 20, 2017
Red Hat Linux is an open source server operating system. Although open source Red Hat is a commercial Linux distribution. So, most of the Linux administrators use CentOS because CentOS is a free and open source, enterprise-class and community-supported server platform as well as it is functionally compatible with Red Hat Enterprise Linux. In my previous article, I showed how to install CentOS 7 core packages in your server machine. Today I will introduce you with Red Hat Linux’s command [...]
- »
CentOS 7 Partition Management with fdisk Utility | February 11, 2019
CentOS or Red Hat Linux is a popular server operating system to the system administrators. Almost all the system admins or IT guys who play with mail server, file server, proxy server and so on are so known with CentOS or Red Hat Linux and cannot go a single day without this operating system. The guys who are also wish to be a system admin should be familiar with CentOS or Red Hat operating system. In my previous article, I [...]
More Similar Content
You May Also Like
