mikrotik firewall tutorial
Most Relevant Content
MikroTik Firewall Basic Concept
MikroTik Firewall functions as a network security tool for preventing unauthorized access to networks as well as provides Network Address Translation functionality. So, a network administrator who is using MikroTik Router in his network cannot go a single day without MikroTik Firewall. Actually, the main duty of a MikroTik administrator is to maintain Firewall properly along with Bandwidth management after completing MikroTik Router basic configuration. So, a MikroTik administrator should have enough knowledge on MikroTik Firewall and so this article is designed to discuss the basic concept on MikroTik Router Firewall. MikroTik Firewall MikroTik Firewall mainly filters good traffic or bad traffic and according to the definition of firewall it should allow good traffic and reject bad traffic. This good and bad traffic is doing one event among the following three events in MikroTik Router. Either the traffic is entering to MikroTik Router, The traffic is leaving from MikroTik Router or The traffic is passing through MikroTik Router. MikroTik administrators like you and me always expect to get good traffic entering to and passing from our MikroTik Router. But the fact is not like so always. We have to always fight against bad traffics. When a local network is connected [...]
- »
Guest WiFi – How to Setup on MikroTik AP | April 30, 2024
Guest WiFi helps to keep your network safe and secure. Any sensitive wireless network should have a guest network. So, Guest WiFi is so essential for an office network. In a corporate office, guests or visitors frequently come and get connected to get internet for a few times. It is so much security issue to keep guest or visitor in the core network because among them someone can damage important network resources. So, to keep them isolated from the core [...]
- »
MikroTik Load Balancing with 2 PPPoE and 1 Static WAN using ECMP | September 24, 2019
ECMP provides almost 100% reliable load balancing and link redundancy solution. ECMP is a per connection load balancing where connection is marked with source and destination IP pair. In my previous article I discussed how to configure DUAL WAN load balancing with failover using ECMP method where WAN connections were static IP Addresses. But some ISP companies use PPPoE service for their client connection. So, some network administrators become confused to configure load balancing with PPPoE WAN connection because PPPoE [...]
- »
MikroTik Send Browsing Log to Remote Syslog Server | August 18, 2019
MikroTik RouterOS is capable of logging various system events as well as user browsing information. Logs can be saved in router’s memory (RAM), disk, file, sent by email or even sent to remote syslog server. Sometimes it may require saving user browsing log by the law. So, a syslog server is an essential part to any network. In this article, I will discuss how to configure MikroTik Router to keep user browsing log and send that log to remote syslog [...]
- »
MikroTik VLAN Routing Configuration with Manageable Switch | July 11, 2018
A VLAN (Virtual LAN) is a group of computers, servers, network printers and other network devices that behave as if they were connected to a single network. VLAN is a logical topology that divides a single broadcast domain into multiple broadcast domains. VLAN is a layer 2 method. So, a manageable switch is required to manage VLAN in your network and a router is required to route and control your inter-VLAN. VLAN increases network security and performance as well as [...]
- »
MikroTik Dual WAN PCC Load Balancing with PPPoE Server | July 5, 2018
Hi geek, you are here because you are finding a complete MikroTik Dual WAN PCC Load balancing and Link Redundancy solution with PPPoE Server because you have managed two ISP connections and want to provide an uninterrupted internet connection to your clients. You also want to manage your LAN clients with PPPoE Server because it provides a hassle free network administration. MikroTik PCC provides 100% reliable Load Balancing and Link Redundancy network and in my previous article I discussed how [...]
- »
MikroTik IPIP Tunnel with IPsec (Site to Site VPN) | March 18, 2018
VPN (Virtual Private Network) is a technology that provides a secure tunnel across a public network. A private network user can send and receive data to any remote private network using VPN Tunnel as if his/her network device was directly connected to that private network. MikroTik provides IPIP tunnel that is used to create a site to site VPN. IPIP tunnel is a simple protocol that encapsulates IP packets in IP to make a tunnel between two routers. To encapsulate [...]
- »
MikroTik DHCP Server Configuration with Radius Server | January 24, 2018
The Dynamic Host Configuration Protocol (DHCP) is a client-server protocol that is used to assign an IP address and other network configuration parameters dynamically to each device on a network so that they can communicate with other IP networks. DHCP Server is popularly used in an Enterprise Office Network because in an office network various types of IP devices such as Laptop, Desktop, Tablet, Smartphone, IP Phone and so on are maintained and almost all IP devices support DHCP. An ISP Network can also be [...]
- »
MikroTik PPPoE Setup with Radius Server Prepaid Billing System | December 23, 2017
MikroTik PPPoE Server is popularly used in ISP Companies to maintain user connection. Along with MikroTik PPPoE Service it is a better idea to make a prepaid billing system with Radius Server. MikroTik User Manager Radius Server is a user authentication and accounting application that gives the ISP Company ability to manage PPPoE user’s connection with proper bandwidth management as well as their prepaid billing system with scratch card. So, any ISP Company can turn a smart network system with [...]
- »
MikroTik PPPoE Server with Radius User Authentication | December 17, 2017
MikroTik PPPoE Server is popularly used in ISP Companies. Almost all Local ISP Companies use PPPoE service to manage their client’s connection. So, PPPoE Server Configuration places an important role in MikroTik RouterOS. MikroTik PPPoE Server configuration with local user database has been discussed in my previous article that is enough to manage PPPoE users for a single RouterOS. But if you have more than one RouterOS in your network or you need to manage your users remotely and more [...]
More Similar Content
