mikrotik inter vlan
Most Relevant Content
MikroTik VLAN Routing Configuration with Manageable Switch
A VLAN (Virtual LAN) is a group of computers, servers, network printers and other network devices that behave as if they were connected to a single network. VLAN is a logical topology that divides a single broadcast domain into multiple broadcast domains. VLAN is a layer 2 method. So, a manageable switch is required to manage VLAN in your network and a router is required to route and control your inter-VLAN. VLAN increases network security and performance as well as improves IT efficiency. So, it will be a better plan to implement VLAN in your network. If you have or manage MikroTik Router and manageable switch, VLAN implementation in your network is not so difficult. In this article, I will show how to easily configure inter-VLAN routing with MikroTik Router and manageable switch. Core Devices and IP Information To configure a VLAN network and inter-VLAN routing, I am using a MikroTik RouterBoard 1100 AHX2 (RouterOS v6.38.1) and Level One (GEP-2450) manageable switch. IP information that I am using for VLAN network configuration are given below. WAN IP 192.168.30.2/30 and Gateway IP 192.168.30.1 LAN networks: 10.10.20.0/24, 10.10.30.0/24 and 10.10.40.0/24 DNS IP: 8.8.8.8 and 8.8.4.4 This IP information is just for my R&D purpose. [...]
- »
How to Block MAC Address in MikroTik RouterOS 7 | July 11, 2024
MikroTik RouterOS 7 by default allows any MAC address to get internet connection through it. But we may need to block some MAC addresses sometimes. There are three methods to block MAC address in MikroTik RouterOS 7 – Blocking MAC Address using Bridge Filter Rule. Blocking MAC Address using Firewall Filter Rule and Blocking MAC Address from DHCP Lease. We can use any of these methods if we want to block MAC Address in MikroTik Router. In this article, we [...]
- »
Guest WiFi – How to Setup on MikroTik AP | April 30, 2024
Guest WiFi helps to keep your network safe and secure. Any sensitive wireless network should have a guest network. So, Guest WiFi is so essential for an office network. In a corporate office, guests or visitors frequently come and get connected to get internet for a few times. It is so much security issue to keep guest or visitor in the core network because among them someone can damage important network resources. So, to keep them isolated from the core [...]
- »
MikroTik Wireless AP Configuration with DHCP using Winbox | October 22, 2019
MikroTik Wireless Router is one of the most popular and stable WiFi Routers. WiFi Zone for an ISP or for an office or for a home can easily be configured with MikroTik WiFi Router. MikroTik has a lot of WiFi Routers that can be used as a WiFi Access Point (AP), a WiFi Station or a WiFi Repeater. MikroTik Wireless Router can also be used as both WiFi Station and WiFi AP simultaneously. The simple usage of MikroTik Wireless Router [...]
- »
VLAN Routing Configuration between MikroTik RouterOS | September 27, 2018
VLAN (Virtual Local Area Network) is a logical topology that divides a single broadcast domain into multiple broadcast domains. It increases network security and performance as well as improves network efficiency. MikroTik VLAN routing configuration with manageable switch was discussed in previous article. Today we will learn how to configure VLAN between MikroTik RouterOS. This Router to router VLAN (layer3 VLAN) is useful when any ISP provide connection to one or more local ISPs who use MikroTik Router to maintain [...]
- »
MikroTik VLAN and Bridge Configuration | September 19, 2017
VLAN and Bridge are two useful features in MikroTik Router. These two features are frequently used in any MikroTik network configuration. VLAN divides a physical interface into multiple logical interfaces. So, you can isolate your network into multiple logical networks on a physical interface. On other hand, MikroTik Bridge integrates multiple physical interfaces in a logical interface. So, you can extend your broadcast domain on multiple physical interfaces and can extend your popular services such as PPPoE or DHCP on [...]
- »
WireGuard Site to Site VPN Between MikroTik RouterOS 7 | September 29, 2022
WireGuard is a free, open source, secure and high-speed modern VPN solution. WireGuard is extremely easy to implement but utilizes state-of-the-art cryptography. WireGuard can be used as either Client-Server VPN technology or Site to Site VPN technology. From the RouterOS 7, MikroTik introduces WireGuard VPN as their native package. So, who are using RouterOS 7 can use WireGuard VPN and can implement both client-server and site to site VPN with WireGuard free VPN server. In my previous article, I discussed [...]
- »
How to Block VPN Access with MikroTik Router | May 14, 2019
Sometimes system administrators create firewall rule to block unwanted websites. But VPN apps break these firewall rules and allow access to unwanted websites. For example, if Facebook is blocked with MikroTik Firewall and any expert user installs and enables VPN apps (such as OpenVPN, Hotspot Shield, ProtonVPN, NordVPN, PureVPN etc.), he can easily get access to Facebook. So, system administrators should also block popular VPN apps so that user cannot use those VPN servers. Blocking VPN apps is not so [...]
- »
How to Properly Downgrade MikroTik RouterOS and Firmware | October 2, 2019
MikroTik RouterOS is in constant development and new features or bug fixes are frequently available, sometimes even monthly. So, it is always recommend upgrading MikroTik RouterOS to a latest and stable version before beginning any configuration. But sometimes you may face that the upgraded version is not working properly according to your demand or you may upgrade to a new version that you don’t want. In this case, you should come back to your workable RouterOS version and firmware. Upgrading RouterOS [...]
- »
MikroTik UserMan RADIUS Server Customers, Users and Routers | November 13, 2017
MikroTik User Manager RADIUS Server is a centralized user authentication and accounting application that gives the ISP Company or network administrator ability to manage MikroTik RouterOS user, PPP user and Hotspot user so smoothly. There are two methods to install MikroTik User Manager RADIUS Server in your network. You can install User Manager Package either on a physical RouterOS or on a dedicated Server Machine or on a Personal Computer where RouterOS is running. How to install and configure User [...]
More Similar Content
You May Also Like