mikrotik l2tp configuration

Most Relevant Content

  • MikroTik L2TP/IPsec VPN Configuration (Connecting Remote Client)

    VPN (Virtual Private Network) is a technology that provides a secure and encrypted tunnel across a public network and using this VPN tunnel a private network user can send and receive data to any remote private network as if his/her network device was directly connected to that private network. MikroTik L2TP server is one of the most popular VPN services. It provides a secure and encrypted tunnel across public network for transporting IP traffic using PPP. L2TP/IPsec is more secure than MikroTik PPTP VPN server. MikroTik L2TP Server can be applied in two methods. Connecting remote workstation/client: In this method, a L2TP client supported operating system such as Windows can communicate with MikroTik L2TP server through L2TP tunnel whenever required and can access remote private network as if it was directly connected to the remote private network. Site-to-Site L2TP: This method is also known as VPN between routers. In this method, a L2TP client supported router always establishes a L2TP tunnel with MikroTik L2TP Server. So, private networks of these routers can communicate to each other as if they were directly connected to the same router. The goal of this article is to connect a remote client operating system using [...]

    READ MORE »

  • More Similar Content

  • »

    WireGuard VPN Setup in MikroTik RouterOS7 with Windows OS |   August 14, 2022

    VPN (Virtual Private Network) is one of the most popular services in MikroTik RouterOS. A lot of VPN services (IPsec, EoIP, OpenVPN, PPTP, L2TP, IPIP etc.) are available in MikroTik RouterOS but in RouterOS7, a new VPN service named WireGuard has been introduced which is extremely simple yet first, secure and modern VPN. WireGuard uses cryptography to make it secure. In RouterOS7, WireGuard can be used either Client-Server (Road Warrior) VPN tunnel or site to site VPN tunnel. Using Client-Server [...]

    READ MORE »

  • »

    OpenVPN Configuration over Port 443 on Ubuntu Linux |   June 20, 2022

    OpenVPN provides a secure and encrypted VPN tunnel across public network. Unlike PPTP and L2TP VPN Services which can be blocked, OpenVPN can highly be customized and even can be run over so popular TCP Port 443. So, OpenVPN cannot easily be blocked. OpenVPN uses SSL/TLS Certificates. So, OpenVPN Tunnel is a trusted tunnel to send and receive data across public network. OpenVPN Server can easily install on Ubuntu Server. Installing OpenVPN Server on Ubuntu Server, we can connect Windows, [...]

    READ MORE »

  • »

    MikroTik OpenVPN Configuration on TCP Port 443 with Windows OS |   April 6, 2020

    MikroTik OpenVPN is an amazing VPN solution. IT provides a secure and encrypted VPN tunnel across public network. Unlike PPTP and L2TP VPN Services which are poorly designed and can easily be blocked, OpenVPN can highly be customized and even can be run on so popular TCP Port 443. So, OpenVPN cannot easily be blocked. OpenVPN uses SSL/TLS Certificates. So, OpenVPN Tunnel is a trusted tunnel to send and receive data across public network. OpenVPN is a site to site [...]

    READ MORE »

  • »

    MikroTik Site to Site VPN with L2TP/IPsec |   March 3, 2018

    VPN (Virtual Private Network) is a technology that provides a secure and encrypted tunnel across a public network. A private network user can send and receive data to any remote private network using this VPN Tunnel as if his/her network device was directly connected to that private network. MikroTik L2TP server is one of the most popular VPN services. It provides a secure and encrypted tunnel across public network for transporting IP traffic using PPP. L2TP/IPsec is more secure than [...]

    READ MORE »

  • You May Also Like

  • »

    CentOS 7 Network Configuration Using nmtui Tool |   August 27, 2018

    After completing CentOS 7 fresh installation, the first task to a system administrator is to configure its network so that it can communicate to other network devices. In my previous article, I discussed how to install CentOS 7.5 GUI (GNOME Desktop) step by step. If you are a new CentOS 7 user and yet you have not installed CentOS 7.5 on your server machine, feel free to study my previous article and install CentOS 7.5 GNOME Desktop according to that [...]

    READ MORE »

  • »

    CentOS 8 Networking Configuration Using nmtui Tool |   December 14, 2020

    The first task after completing CentOS 8 fresh installation is to configure its networking so that it can be accessed from other network devices. In my previous article, I discussed how to install CentOS 8 Graphical User Interface (GNOME Desktop) with step by step screenshots. If you are a new CentOS 8 user and have not yet installed CentOS 8 on your server machine, feel free to follow that article and install CentOS 8 GNOME Desktop according to the article. [...]

    READ MORE »

  • »

    MikroTik HotSpot One to One NAT/Universal HotSpot NAT |   September 27, 2020

    MikroTik Hotspot is an awesome service that can be customized widely. When MikroTik Hotspot is enabled on an interface, it adds dynamic destination NAT rules which will redirect all HTTP and HTTPS requests from unauthorized users to the Hotspot authentication proxy. So, no user can get internet access in Hotspot network without authentication. MikroTik Hotspot also uses one to one NAT providing an IP address from selected IP Pool and this IP address handles user’s data and limitation. Sometimes we [...]

    READ MORE »

  • »

    Apache2 Web Server HTTPS Configuration on Ubuntu Server |   August 15, 2021

    Data transmission between web server and web client over port 80 (HTTP) is not encrypted. So, any middle man between web server and web client can view transmitted data and can steal secret information. To overcome this limitation, HTTPS Protocol over port 443 has been introduced. HTTPS is a secure web server that is configured with SSL/TLS certificate. TLS (Transport Layer Security) and its predecessor SSL (Secure Sockets Layer) are web protocols used to wrap normal traffic in a protected, [...]

    READ MORE »

  • »

    PPPoE Server Configuration in MikroTik RouterOS 7 |   December 2, 2023

    MikroTik PPPoE is a client-server protocol and mostly used at the end ISP configuration where MikroTik RouterOS acts as a PPPoE Server and user’s WiFi Router acts as PPPoE client. MikroTik PPPoE Server can be used with MikroTik simple queue management. So, it helps to manage user’s bandwidth easily. People who are trying to do internet business should learn MikroTik PPPoE Server. Configuring PPPoE Server in MikroTik RouterOS 7 is so easy. If you have knowledge on basic RouterOS 7 [...]

    READ MORE »