mikrotik load balance 2 wan
Most Relevant Content
MikroTik Dual WAN Load Balancing with Failover using PCC
Hi geek, going through this article means you are finding Load Balancing as well as Link Redundancy solution for your MikroTik network because you already have multiple WAN connections or you are planning to lease multiple WAN connections. MikroTik has various Load Balancing and Link Redundancy methods such as ECMP, PCC and so on. ECMP method provides an easy configurable load balancing with failover solution but it has some known issues too in a large network. On the hand, PCC provides 100% reliable load balancing and link redundancy solution but the configuration is a little bit complex. In my previous article I discussed how to easily configure ECMP Load Balancing and Link Redundancy network and in this article I will discuss how to configure PCC Load Balancing and Link Redundancy network with MikroTik Router over Dual Gateway. Core Devices and IP Information To configure a load balancing with failover network, I am using MikroTik RouterOS v6.38.1 that has two ISP connections and a LAN network. IP information that I am using for this network configuration are given below. ISP1 IP 192.168.30.2/30 and Gateway IP 192.168.30.1 ISP2 IP 192.168.60.2/30 and Gateway IP 192.168.60.1 LAN network: 10.10.70.0/24 and LAN Gateway IP 10.10.70.1/24 [...]
- »
MikroTik RouterOS Device Mode: Home, Basic, and Advanced – and Their Impact on Hotspot Setup | November 4, 2025
MikroTik RouterOS offers flexible configuration options for everything from home routers to ISP-grade hotspots. When setting up your MikroTik device, you’ll see a Device Mode option in Quick Set — allowing you to choose between Home, Basic, or Advanced modes. These modes define how much control you have over the router’s features and directly affect your ability to create and manage a Hotspot network. In this guide, we’ll explain each mode, show you how to check and change device mode [...]
- »
MikroTik Load Balancing over Multiple Gateways (2 WAN) | October 13, 2016
Load Balancing is a technique used to send network traffic over multiple gateways. If you have multiple ISP connections in your network, you can send your network traffic through those ISP connections and can make a load balancing network. Accidently you may ask me, why will I use multiple ISP connections? What are the benefits to use multiple ISP connections in my network? I will say, ask yourself deeply then you will find the reasons why multiple ISP connections is [...]
- »
5 Factors That Affect the VPN Speed | July 6, 2021
So you have finally decided to use VPN services. While it’s a great option you must have your concerns. One of these must be the VPN slowing down at times. If that’s the case then it’s better to know the reasons and to explore the issue prior buying or using a free VPN service. Whether you own a fashion brand or a company that teaches coding to beginner kids, many companies use VPN to provide its employees with a closer [...]
- »
MikroTik PPPoE Server Configuration with freeRADIUS Server | January 20, 2019
PPPoE Service is one of the most popular services in MikroTik Router. It is specially used by the local ISP provider for the simplicity of client connection. MikroTik PPPoE Service accepts user or client authentication and authorization both MikroTik local user database and RADIUS user database. RADIUS Server provides an efficient way to manage user authentication, authorization and accounting. FreeRADIUS is a high performance RADIUS suite that provides user authentication, authorization and accounting facility for a number of network devices [...]
- »
MikroTik Unequal Dual WAN Load Balancing with Failover using ECMP | September 15, 2019
MikroTik Router is capable of doing Load Balancing with Failover over multiple gateways. Policy Based Routing, ECMP, PCC and NTH Load Balancing are the popular load balancing methods in MikroTik Router. Among these methods, ECMP is so easy to configure and provides almost 100% load balancing and link redundancy solution. In my previous article, I discussed how to configure Load Balancing and Link Redundancy using ECMP over two equal bandwidth gateways. ECMP method is also capable of doing load balancing [...]
- »
MikroTik Load Balancing and Link Redundancy with PBR | March 31, 2019
In computer networking, the Load Balancing technique is used to send network traffic over multiple gateways. If you have multiple ISP connections available, you can use load balancing technique to establish a stable network. You may now ask, why will I use multiple ISP connections? What are the benefits to use multiple ISP connections in my network? For your satisfaction, the following points are some reasons to use load balancing technique in your network. No ISP can give you 100% [...]
- »
MikroTik Hotspot Server Configuration in RouterOS 7 | April 25, 2023
MikroTik Hotspot is an awesome service to run a captive portal network. You can run a public Wi-Fi network, Hotel Network, Airport network, CAMP Wi-Fi network, Shopping Mall Network and so on using MikroTik Hotspot and even can monetize your network for earning if you use Hotspot Billing Software like GalaxyRAD which is specially designed for MikroTik Hotspot network. GalaxyRAD helps to monetize your any network providing online payment gateway as well as integrating voucher-based system. It also helps to [...]
- »
Managing Disk Partition with the parted Tool in CentOS 7 | March 2, 2019
As a system administrator, sometimes you may require to manage partitions of your CentOS/Red Hat Linux Operating System. Partition management is always a risky task. But there are some useful tools those are so helpful to manage CentOS/Red Hat Linux disk partition easily. In my previous article, I discussed how to manage CentOS/Red Hat 7 HDD partitions with the fdisk utility. The fdisk tool is only eligible to manage MBR partition table. But GPT partition table is now becoming more [...]
- »
How to Block WiFi Access although Password is Known | April 23, 2024
We usually get internet connection from any ISP and buy any WiFi Router and then configure wireless/AP with password and configure DHCP Server to get connection from own WiFi devices. We use these WiFi Routers/APs at home, office, workspace or any other public places. Usually, we get connected to our WiFi using our provided WiFi password. Initially there will be no problem to keep your network safe using password authentication. But day by day your password will be known by [...]
More Similar Content
You May Also Like
