mikrotik load balancing with pppoe client
Most Relevant Content
MikroTik Load Balancing with 2 PPPoE and 1 Static WAN using ECMP
ECMP provides almost 100% reliable load balancing and link redundancy solution. ECMP is a per connection load balancing where connection is marked with source and destination IP pair. In my previous article I discussed how to configure DUAL WAN load balancing with failover using ECMP method where WAN connections were static IP Addresses. But some ISP companies use PPPoE service for their client connection. So, some network administrators become confused to configure load balancing with PPPoE WAN connection because PPPoE WAN connection is a little bit complex than static WAN connection. Some of my loyal readers also ask me to make a tutorial on Load Balancing with PPPoE Client. So, in this article I will discuss how to configure Load Balancing with Failover over two PPPoE WAN connections and one static WAN connection in MikroTik Router. Network Diagram We will configure Multi WAN load balancing using ECMP method according to the following network diagram. In this network, MikroTik Router’s ether1 port is connected to ISP1 with PPPoE WAN connection (username: wan1 and Password: wan1) and ether2 port is connected to ISP2 with PPPoE WAN connection (username: wan2 and Password: wan2) and ether3 port is connected ISP3 with IP block 172.25.25.0/30 [...]
- »
MikroTik Dual WAN PCC Load Balancing with PPPoE Server | July 5, 2018
Hi geek, you are here because you are finding a complete MikroTik Dual WAN PCC Load balancing and Link Redundancy solution with PPPoE Server because you have managed two ISP connections and want to provide an uninterrupted internet connection to your clients. You also want to manage your LAN clients with PPPoE Server because it provides a hassle free network administration. MikroTik PCC provides 100% reliable Load Balancing and Link Redundancy network and in my previous article I discussed how [...]
- »
MikroTik RouterOS Device Mode: Home, Basic, and Advanced – and Their Impact on Hotspot Setup | November 4, 2025
MikroTik RouterOS offers flexible configuration options for everything from home routers to ISP-grade hotspots. When setting up your MikroTik device, you’ll see a Device Mode option in Quick Set — allowing you to choose between Home, Basic, or Advanced modes. These modes define how much control you have over the router’s features and directly affect your ability to create and manage a Hotspot network. In this guide, we’ll explain each mode, show you how to check and change device mode [...]
- »
Create System Restore Point in Windows OS | August 27, 2015
System Restore utility in windows operating system helps a windows user to take one or more snapshots of his/her windows system when windows operating system is working well. If any system crash occurs in future due to virus attack or critical system update or any unwanted program, the system can be reverted to its previous snapshot when windows OS was working well. So, System Restore utility in windows operating system is a very helpful service for windows users to protect [...]
- »
CAPsMAN Channel Planning with Non-Overlapping Frequency | March 16, 2020
MikroTik CAPsMAN is an excellent application for managing multiple CAPs (Controlled Access Point) in a Wireless Network. But multiple APs create frequency overlapping issue if channels are not configured properly. Channel overlapping is required for smooth connection while roaming but there should not be frequency overlapping because frequency overlapping makes wireless performance so poor. In my previous article, I discussed MikroTik CAPsMAN basic configuration with default channel configuration. In this article, I will discuss how to configure CAPsMAN channel to [...]
- »
MikroTik Hotspot HTTPS Redirect with Free SSL Certificate | June 21, 2020
SSL Certificate is required to enable HTTPS Login and HTTPS Redirect in MikroTik Hotspot. In one of my last articles I discussed how to configure MikroTik Hotspot HTTPS redirect and HTTPS login with MikroTik self-signed certificate. But self-signed certificate is not trusted by operating system. So, we get the following two issues if we configure HTTPS Login and HTTPS Redirect with self-signed certificate. Ask to proceed unsafe site: As browsers cannot trust self-signed certificate, it shows a warning message and [...]
- »
MikroTik Hotspot Login Page with Random MAC Detection | October 5, 2025
Hotspot businesses such as cafés, restaurants, co-working spaces, schools, and ISPs often rely on MikroTik Hotspot solutions to provide Wi-Fi access. One common challenge is that many modern devices (Android, iOS, Windows, macOS) use randomized (private) MAC addresses, which can cause repeated logins, loss of session persistence, and difficulties with usage tracking. To solve this problem, we have designed a professional Hotspot Login Page Template that not only looks modern and mobile-friendly but also detects randomized MAC addresses and notifies [...]
- »
Virtual Web Hosting with Apache on CentOS 7 (Name Based) | July 15, 2019
Virtual Hosting is a method of hosting multiple domains on single server. If you have multiple domains (such as domain1.com, domain2.com and so on) and want to host on a webserver, Virtual Web Hosting is your right choice. Apache web server provides an easy way to manage Virtual Hosting. Virtual Hosting can be either Name Based or IP Based. In Name Based Virtual Hosting, multiple domains can be hosted on single IP address. On the other hand, in IP Based [...]
- »
MikroTik RADIUS Server Setup with User Manager – RouterOS7 | August 4, 2022
MikroTik User Manager RADIUS Server is an awesome service for user Authentication, Authorization and Accounting (AAA) for a small or medium business. User Manager RADIUS Server can be used to maintain Hotspot, PPP, DHCP, IPsec, Wireless and System User authentication. In RouterOS 7, User Manager has come with new features and looking, specially, maintaining from Winbox. As User Mange package does not come with the default system package in RouterOS 7, we have to install User Manger package manually before [...]
- »
Restrict Internet Access Based on MAC Address in MikroTik | February 4, 2017
MikroTik router has a lot of features by which a network administrator can design his network as he likes. As a network administrator, sometimes you may need to allow internet access some specific devices. If other devices try to access internet, they will be rejected by your router. For example, say, you have configured a simple network like below diagram. In this network, you have configured WAN, LAN, Gateway, DNS and NAT. Also you have created queue rules for limiting [...]
More Similar Content
You May Also Like
