mikrotik network simulator with gns3
Most Relevant Content
MikroTik Router Integration and Configuration on GNS3
GNS3 is a network simulator software used by hundreds of thousands of network engineers worldwide to emulate, configure, test and troubleshoot virtual and real networks. GNS3 can talk a large number of network vendors including MikroTik. MikroTik introduces Cloud Hosted Router (a RouterOS version) that is used to run as virtual machine and a virtual machine can easily be integrated with GNS3. So, network administrators who are fond of MikroTik Router can now configure, test and troubleshoot their MikroTik network with GNS3 so easily. In my previous article I discussed how to install and configure GNS3 in Windows Operating System and in this article I will show how to integrate and configure MikroTik Router on GNS3 to simulate any MikroTik network. MikroTik Router on GNS3 GNS3 is the best friend for those who are unable to arrange a lot of real devices and fail to configure, test and troubleshoot any complex network with MikroTik Router. GNS3 can now talk with MikroTik Router. So, emulating MikroTik Router on GNS3, a network administrator can easily do R&D and can implement it to production environment. MikroTik Router integration and configuration on GNS3 can be divided into the following three steps. Downloading MikroTik Cloud [...]
- »
GNS3 Installation and Configuration Step by Step in Windows | September 14, 2018
GNS3 (Graphical Network Simulator) is one of the most popular network simulator software used by hundreds of thousands of network engineers worldwide to emulate, configure, test and troubleshoot virtual and real networks. GNS3 supports a large number of vendors such as MikroTik, Cisco, Juniper, Windows, Linux and many other vendors. GNS3 can be installed on Windows, Linux and MAC Operating System. In this article, I will show how to download and install GNS3 application in Windows Operating System. I will [...]
- »
CentOS 7 Network Configuration Using nmtui Tool | August 27, 2018
After completing CentOS 7 fresh installation, the first task to a system administrator is to configure its network so that it can communicate to other network devices. In my previous article, I discussed how to install CentOS 7.5 GUI (GNOME Desktop) step by step. If you are a new CentOS 7 user and yet you have not installed CentOS 7.5 on your server machine, feel free to study my previous article and install CentOS 7.5 GNOME Desktop according to that [...]
- »
MikroTik Blocking Websites with TLS Host Firewall Matcher | April 29, 2019
Most of the websites now use https and blocking https websites is so much harder with the MikroTik RouterOS version less than 6.41. But from RouterOS v6.41, MikroTik Firewall introduces a new property named TLS Host that is capable to match https websites so easily. So, blocking https websites like Facebook, YouTube etc. can be easily done with MikroTik Router if RouterOS version is greater than 6.41. In my previous article, I discussed how to block websites with MikroTik Router [...]
- »
MikroTik Site to Site OpenVPN Server Setup (RouterOS Client) | April 9, 2018
VPN (Virtual Private Network) technology provides a secure and encrypted tunnel across a public network. So, a private network user can send and receive data to any remote private network through VPN tunnel as if his/her network device was directly connected to that private network. MikroTik OpenVPN Server provides a secure and encrypted tunnel across public network for transporting IP traffic using PPP. OpenVPN Server uses SSL Certificates. So, OpenVPN Tunnel is a trusted tunnel to send and receive data [...]
- »
MikroTik Load Balancing with 2 PPPoE and 1 Static WAN using ECMP | September 24, 2019
ECMP provides almost 100% reliable load balancing and link redundancy solution. ECMP is a per connection load balancing where connection is marked with source and destination IP pair. In my previous article I discussed how to configure DUAL WAN load balancing with failover using ECMP method where WAN connections were static IP Addresses. But some ISP companies use PPPoE service for their client connection. So, some network administrators become confused to configure load balancing with PPPoE WAN connection because PPPoE [...]
- »
MikroTik Bandwidth and Resource Monitoring with Graphs | January 31, 2018
“Am I getting my committed bandwidth?” is a common question to any network administrator. This question may arise either from your customer or from your owner if you are an employee of any organization. If you feel boring hearing this question and want to establish a system where your customer will be able to inspect his bandwidth usage, MikroTik Graphing is your best friend. MikroTik Graphing can be used to display graphics for traffic which is passed through interfaces and [...]
- »
MikroTik Load Balancing and Link Redundancy with ECMP | October 28, 2016
Load balancing and link redundancy is the main concern to any network administrator. Because, they always want to keep live their network 24/7. If you have multiple WAN connections, you can easily make a load balancing as well as link redundancy network with MikroTik Router. Different types of load balancing and link redundancy are present in MikroTik Router. ECMP Load Balancing is one of them. ECMP is so easy to implement and it provides an perfect load balancing solution. In this [...]
- »
How to Install Extra Packages in MikroTik RouterOS | October 10, 2019
MikroTik RouterOS does not always include all the packages those are developed by MikroTik team. So, sometimes you may find that some packages are missing in your RouterOS such as NTP package, DUDE package, Wireless package, CAPsMAN package and so on. Specially, user manager package which is totally a separate MikroTik RADIUS package used to manage user authentication, authorization and accounting is always missing. Also upgrading RouterOS or downgrading RouterOS you may find that some packages are missing there. So, [...]
- »
How to Block WiFi Access although Password is Known | April 23, 2024
We usually get internet connection from any ISP and buy any WiFi Router and then configure wireless/AP with password and configure DHCP Server to get connection from own WiFi devices. We use these WiFi Routers/APs at home, office, workspace or any other public places. Usually, we get connected to our WiFi using our provided WiFi password. Initially there will be no problem to keep your network safe using password authentication. But day by day your password will be known by [...]
More Similar Content
You May Also Like
