MikroTik Quick Setup

Most Relevant Content

  • MikroTik RouterOS 7 Quick Setup using Winbox 4

    MikroTik RouterBoard and MikroTik Wireless Router are popularly used now a days. MikroTik RouterBoard is used in ISP Network and MikroTik Wireless Router is specially used for home users. MikroTik RouterBoard requires custom configuration because it is used for large network. On the other hand, MikroTik Wireless Router is used in home for a small network. MikroTik Wireless Router requires quick setup because home users are so hurry and not so technical. So, MikroTik RouterOS 7 provides a quick setup option. In this article, we are going to see the quick setup option of MikroTik RouterOS 7 using Winbox 4. MikroTik Winbox 4 MikroTik Winbox 4 is a modern, simple and fast RouterOS 7 GUI. It is now available to download from MikroTik Software Download page for any OS platform. If you are yet not familiar with Winbox 4, download and install it in your OS and follow Quick Setup guide. We are using Winbox 4 for our quick setup guide. MikroTik RouterOS 7 Quick Configuration Connect the ISP cable to first ether port (ether1) and then connect a RJ45 cable to your PC and any other port of your MikroTik Router. Open Winbox 4 and select Neighbors from right [...]

    READ MORE »

  • More Similar Content

  • »

    MikroTik Router First Time Startup and Setup using WebFig |   April 17, 2018

    I guess, you have purchased a new MikroTik Router or installed a new MikroTik RouterOS on PC and you are searching How to Start MikroTik Router First Time and How to Complete Basic RouterOS Configuration using WebFig (Web Interface) for running a basic network. If these are your concern, don’t worry, in this article I will show how to startup your MikroTik Router first time and complete RouterOS basic configuration using WebFig web interface so easily. There are three methods [...]

    READ MORE »

  • You May Also Like

  • »

    Red Hat/CentOS Network Configuration |   August 4, 2017

    Red Hat/CentOS network configuration or IP configuration is an important task to a Linux system administrator. After completing RedHat 7/ CentOS 7 fresh installation, you have to first configure your system network so that it can communicate to other network devices. In my previous article, I discussed how to install CentOS 7 core packages successfully on your physical machine. If you are a new CentOS 7 user and yet you have not installed CentOS on your machine, feel free to study [...]

    READ MORE »

  • »

    CAPsMAN Channel Planning with Non-Overlapping Frequency |   March 16, 2020

    MikroTik CAPsMAN is an excellent application for managing multiple CAPs (Controlled Access Point) in a Wireless Network. But multiple APs create frequency overlapping issue if channels are not configured properly. Channel overlapping is required for smooth connection while roaming but there should not be frequency overlapping because frequency overlapping makes wireless performance so poor. In my previous article, I discussed MikroTik CAPsMAN basic configuration with default channel configuration. In this article, I will discuss how to configure CAPsMAN channel to [...]

    READ MORE »

  • »

    MikroTik RouterOS User Authentication via RADIUS Server |   November 19, 2017

    MikroTik RouterOS has a strong local user database that is enough to manage a single MikroTik RouterOS user. But if your network has more than one MikroTik Routers, it is always better to use a RADIUS server to manage RouterOS user centrally. MikroTik User Manager RADIUS Server is a centralized user authentication and accounting application that gives the ISP Company or network administrator ability to manage not only RouterOS users but also PPP, Hotspot, DHCP and Wireless users. How to [...]

    READ MORE »

  • »

    MikroTik SSTP VPN Server Configuration with Windows 10 |   April 27, 2020

    VPN (Virtual Private Network) technology provides a secure and encrypted tunnel across a public network. So, a private network user can send and receive data to any remote private network through VPN tunnel as if his/her network device was directly connected to that private network. Secure Socket Tunneling Protocol (SSTP) transports PPP tunnel over TLS channel. SSTP uses TLS channel over TCP port 443. So, SSTP VPN can virtually pass through all firewalls and proxy servers. Because of using TLS [...]

    READ MORE »

  • »

    How to Use Old Router as Range Extender to Boost WiFi Signal |   October 7, 2019

    WiFi is a technology to turn wired internet into WiFi internet and used in every home and office. Wireless internet gives you the freedom to use the internet without sitting in a single place. It is also true that speed performance drop in Wi-fi due to weak signal or interference. Sometimes laying a physical wired connection in every room is not possible. So Wi-Fi range extender setup helps you to boost signal strength. Instead of buying a new range extender [...]

    READ MORE »

  • »

    OpenVPN Configuration over Port 443 on Ubuntu Linux |   June 20, 2022

    OpenVPN provides a secure and encrypted VPN tunnel across public network. Unlike PPTP and L2TP VPN Services which can be blocked, OpenVPN can highly be customized and even can be run over so popular TCP Port 443. So, OpenVPN cannot easily be blocked. OpenVPN uses SSL/TLS Certificates. So, OpenVPN Tunnel is a trusted tunnel to send and receive data across public network. OpenVPN Server can easily install on Ubuntu Server. Installing OpenVPN Server on Ubuntu Server, we can connect Windows, [...]

    READ MORE »

  • »

    How to Assign VMware ESXi License Key |   December 4, 2021

    No doubt VMware is the pioneer in virtualization world. VMware can be used either premium or free based on licensing. In the previous article, I discussed how to install VMware ESXi on a physical server or machine and then I also discussed how to get VMware ESXi free license from VMware website. Getting VMware ESXi license key either premium or free, we may sometimes get confused how to assign the license key in VMware ESXi host. So, in this article [...]

    READ MORE »

  • »

    GNS3 Installation and Configuration Step by Step in Windows |   September 14, 2018

    GNS3 (Graphical Network Simulator) is one of the most popular network simulator software used by hundreds of thousands of network engineers worldwide to emulate, configure, test and troubleshoot virtual and real networks. GNS3 supports a large number of vendors such as MikroTik, Cisco, Juniper, Windows, Linux and many other vendors. GNS3 can be installed on Windows, Linux and MAC Operating System. In this article, I will show how to download and install GNS3 application in Windows Operating System. I will [...]

    READ MORE »